When the flag CI_HDRC_PULLUP_ON_VBUS is set, .pullup should only be
called when the vbus is active. When the CI_HDRC_PULLUP_ON_VBUS
is set, the controller only begins to run when the vbus is on,
So, it is only meaningful software set pullup/pulldown after
the controller begins to run.
Tested-by: Marek Vasut <ma...@denx.de>
Signed-off-by: Peter Chen <peter.c...@freescale.com>
---
drivers/usb/chipidea/udc.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 45abf4d..b7ead5f 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1514,6 +1514,10 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int
is_on)
{
struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+ if ((ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS)
+ && !ci->vbus_active)
+ return -EOPNOTSUPP;
+
if (is_on)
hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
else
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
