Actually, there is some new bug I haven't seen before (this is 3.10.9 kernel).
First of all, I see my TI XHCI controller does not use MSI-X anymore, will have
to check my .config why is it so.
Second, it should have IRQ 45 and 46 according to dmesg. But lspci reports
IRQ 16 is used by TI XHCI controller. Funny! I would say this is linux-pci issue
but provided XHCI_HCD is special and manages interrupts somewhat on its own you
may
look into that first before we ask linux-pci developers.
Martin MOKREJŠ wrote:
> Hi Xenia,
> thank you, how about inclusion of the "parent hub" number in the
> following message (as of now):
>
> Parent hub missing LPM exit latency info. Power management will be impacted.
>
>
>
> I find it awkward to later on run manually lspci/lsusb to find what is the
> parent.
> I think I do NOT get these messages when I have pcie_aspm=off whereas when
> it is on I get the warning. Why PCIe powersaving affects how USB end devices
> will
> be put to sleep I don't know. But that will be the next step to look into.
> First the warning message. And maybe it could be improve even further to
> include
> other relevant capabilities of the "parent" present/missing. ;-)
>
>
> Here are bits from my dmesg:
> [ 4.159824] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 4.159963] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000
> [ 4.179142] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 4.195178] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 4.195283] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000
> [ 4.209148] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 4.219252] xhci_hcd 0000:0b:00.0: irq 45 for MSI/MSI-X
> [ 4.219298] xhci_hcd 0000:0b:00.0: irq 46 for MSI/MSI-X
> [ 5.100550] usb 3-2: new high-speed USB device number 2 using xhci_hcd
> [ 5.123995] usb 3-2: New USB device found, idVendor=2109, idProduct=0811
> [ 5.125864] usb 3-2: New USB device strings: Mfr=0, Product=1,
> SerialNumber=0
> [ 5.127705] usb 3-2: Product: USB2.0 Hub
> [ 5.159101] hub 3-2:1.0: USB hub found
> [ 5.161643] hub 3-2:1.0: 4 ports detected
> [ 5.291321] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
> [ 5.313219] usb 4-2: Parent hub missing LPM exit latency info. Power
> management will be impacted.
> [ 5.319428] usb 4-2: New USB device found, idVendor=2109, idProduct=0811
> [ 5.321417] usb 4-2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 5.323353] usb 4-2: Product: 4-Port USB 3.0 Hub
> [ 5.325272] usb 4-2: Manufacturer: VIA Labs, Inc.
>
> 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family
> USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
> Subsystem: Dell Device 04b3
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family
> USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
> Subsystem: Dell Device 04b3
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 23
> 0b:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI
> Host Controller (rev 02) (prog-if 30 [XHCI])
> Subsystem: Dell Device 04b3
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
# cat /proc/interrupts
CPU0
0: 22 IO-APIC-edge timer
1: 16 IO-APIC-edge i8042
8: 55 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 5090314 IO-APIC-edge i8042
16: 66 IO-APIC-fasteoi ehci_hcd:usb1
23: 28835 IO-APIC-fasteoi ehci_hcd:usb2
40: 0 PCI-MSI-edge pciehp
41: 15985 PCI-MSI-edge i915
42: 14 PCI-MSI-edge mei_me
43: 227029 PCI-MSI-edge ahci
44: 208160 PCI-MSI-edge enp5s0
45: 729889 PCI-MSI-edge xhci_hcd
46: 0 PCI-MSI-edge xhci_hcd
47: 940 PCI-MSI-edge snd_hda_intel
48: 1 PCI-MSI-edge iwlwifi
NMI: 21635 Non-maskable interrupts
LOC: 7545378 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 21635 Performance monitoring interrupts
IWI: 1583914 IRQ work interrupts
RTR: 0 APIC ICR read retries
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 254 Machine check polls
ERR: 0
MIS: 0
# dmesg | head -n 2
[ 0.000000] Linux version 3.10.9-default-pciehp (root@vostro) (gcc version
4.6.3 (Gentoo 4.6.3 p1.8, pie-0.5.2) ) #8 SMP Tue Aug 27 01:37:03 MEST 2013
[ 0.000000] Command line: root=/dev/sda5 slub_debug=AFPZ
pciehp.pciehp_debug=1 pciehp_debug=1
Martin
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
