On Fri, Oct 25, 2013 at 02:02:19PM +0800, Peter Chen wrote:
> According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB
> register error issue", All USB register write operations must
> use the ARM SWP instruction. So, we implement a special ehci_write
> for imx28.
> 
> Discussion for it at below:
> http://marc.info/?l=linux-usb&m=137996395529294&w=2
> 

Hi Greg, the last two DT patches are not needed at current time.
The first three are OK. Thanks.

Peter

> Signed-off-by: Peter Chen <peter.c...@freescale.com>
> ---
>  drivers/usb/host/ehci.h |   13 +++++++++++++
>  1 files changed, 13 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
> index e8f41c5..535aa8b 100644
> --- a/drivers/usb/host/ehci.h
> +++ b/drivers/usb/host/ehci.h
> @@ -225,6 +225,7 @@ struct ehci_hcd {                 /* one per controller */
>       unsigned                has_synopsys_hc_bug:1; /* Synopsys HC */
>       unsigned                frame_index_bug:1; /* MosChip (AKA NetMos) */
>       unsigned                need_oc_pp_cycle:1; /* MPC834X port power */
> +     unsigned                imx28_write_fix:1; /* For Freescale i.MX28 */
>  
>       /* required for usb32 quirk */
>       #define OHCI_CTRL_HCFS          (3 << 6)
> @@ -728,6 +729,13 @@ static inline unsigned int ehci_readl(const struct 
> ehci_hcd *ehci,
>  #endif
>  }
>  
> +#ifdef CONFIG_SOC_IMX28
> +static inline void imx28_ehci_writel(u32 val32, volatile u32 *addr)
> +{
> +     __asm__ ("swp %0, %0, [%1]" : : "r"(val32), "r"(addr));
> +}
> +#endif
> +
>  static inline void ehci_writel(const struct ehci_hcd *ehci,
>               const unsigned int val, __u32 __iomem *regs)
>  {
> @@ -735,6 +743,11 @@ static inline void ehci_writel(const struct ehci_hcd 
> *ehci,
>       ehci_big_endian_mmio(ehci) ?
>               writel_be(val, regs) :
>               writel(val, regs);
> +#elif defined(CONFIG_SOC_IMX28)
> +     if (ehci->imx28_write_fix)
> +             imx28_ehci_writel(val, regs);
> +     else
> +             writel(val, regs);
>  #else
>       writel(val, regs);
>  #endif
> -- 
> 1.7.1
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 

Best Regards,
Peter Chen

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to