On Fri, Nov 01, 2013 at 12:49:22PM +0100, Frank Schäfer wrote: > Some PL2303 chips are reported to lose bytes if the serial settings are set to > the same values as before. > At least HXD chips are affected, HX chips seem to be ok. > The current code tries to avoid this by calling tty_termios_hw_change(), but > this check isn't sufficient because different requested baud rates can result > in identic encoded baud rates. > The solution is to save and compare the encoded settings instead.
I tried this on top of rc7 and I can still see data get corrupted (both 115200 and 460800 bps). -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
