On 11/20/2013 09:38 PM, Ulrich Hecht wrote:
Allows binding of PCI USB host controllers to this phy.
Signed-off-by: Ulrich Hecht <[email protected]>
---
drivers/usb/phy/phy-rcar-gen2-usb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c
b/drivers/usb/phy/phy-rcar-gen2-usb.c
index a99a695..25fdd91 100644
--- a/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ b/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -212,8 +212,9 @@ static int rcar_gen2_usb_phy_probe(struct platform_device
*pdev)
priv->phy.init = rcar_gen2_usb_phy_init;
priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
+ priv->phy.type = USB_PHY_TYPE_USB2;
The above line is not really needed.
I think we should switch to usb_bind_phy and bind USB phy to the renesas_usbhs
device instead.
In this case usbhs device probe will be deferred unless usb phy is available.
- retval = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+ retval = usb_add_phy_dev(&priv->phy);
if (retval < 0) {
dev_err(dev, "Failed to add USB phy\n");
return retval;
Thanks,
Val.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
