Hi,
On Thursday 28 November 2013 09:29 PM, Heikki Krogerus wrote:
> Registers ULPI interface with the ULPI abstraction layer if
> the HSPHY type is ULPI, which will create phy instance for
> usb2.
>
> Depends on Kishon's patch set adding support for generic PHY
> framework.
>
> Signed-off-by: Heikki Krogerus <[email protected]>
> ---
> drivers/usb/dwc3/Kconfig | 7 +++
> drivers/usb/dwc3/Makefile | 4 ++
> drivers/usb/dwc3/core.c | 8 ++++
> drivers/usb/dwc3/core.h | 21 +++++++++
> drivers/usb/dwc3/ulpi.c | 110
> ++++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 150 insertions(+)
> create mode 100644 drivers/usb/dwc3/ulpi.c
>
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 64eed6f..a97b294 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -13,6 +13,13 @@ config USB_DWC3
>
> if USB_DWC3
>
> +config USB_DWC3_ULPI
> + bool "Provide ULPI PHY Interface"
> + depends on ULPI_PHY=y || ULPI_PHY=USB_DWC3
> + help
> + Select this if you have ULPI type PHY attached to your DWC3
> + controller.
> +
> choice
> bool "DWC3 Mode Selection"
> default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
> index dd17601..8bb82bc 100644
> --- a/drivers/usb/dwc3/Makefile
> +++ b/drivers/usb/dwc3/Makefile
> @@ -13,6 +13,10 @@ ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET)
> $(CONFIG_USB_DWC3_DUAL_ROLE)),)
> dwc3-y += gadget.o ep0.o
> endif
>
> +ifneq ($(CONFIG_USB_DWC3_ULPI),)
> + dwc3-y += ulpi.o
> +endif
> +
> ifneq ($(CONFIG_DEBUG_FS),)
> dwc3-y += debugfs.o
> endif
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 1c0a69a..94927b2 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -505,6 +505,12 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc->regs_size = resource_size(res);
> dwc->dev = dev;
>
> + if (!dwc->usb2_generic_phy) {
> + ret = dwc3_ulpi_init(dwc);
shouldn't this be called from dwc3-pci (or any other dwc3 glue)?
> + if (ret)
> + return ret;
> + }
> +
> dev->dma_mask = dev->parent->dma_mask;
> dev->dma_parms = dev->parent->dma_parms;
> dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
> @@ -613,6 +619,7 @@ err1:
>
> err0:
> dwc3_free_event_buffers(dwc);
> + dwc3_ulpi_exit(dwc);
>
> return ret;
> }
> @@ -653,6 +660,7 @@ static int dwc3_remove(struct platform_device *pdev)
> dwc3_event_buffers_cleanup(dwc);
> dwc3_free_event_buffers(dwc);
> dwc3_core_exit(dwc);
> + dwc3_ulpi_exit(dwc);
>
> return 0;
> }
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 01ec7d7..6df398a 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -169,6 +169,14 @@
> #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
> #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
>
> +/* Global USB2 PHY Vendor Control Register */
> +#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25)
> +#define DWC3_GUSB2PHYACC_BUSY (1 << 23)
> +#define DWC3_GUSB2PHYACC_WRITE (1 << 22)
> +#define DWC3_GUSB2PHYACC_ADDR(n) (n << 16)
> +#define DWC3_GUSB2PHYACC_EXTEND_ADDR(n) (n << 8)
> +#define DWC3_GUSB2PHYACC_DATA(n) (n & 0xff)
> +
> /* Global USB3 PIPE Control Register */
> #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
> #define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
> @@ -557,6 +565,7 @@ struct dwc3_hwparams {
> #define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15)
>
> /* HWPARAMS3 */
> +#define DWC3_ULPI_HSPHY (1 << 3)
> #define DWC3_NUM_IN_EPS_MASK (0x1f << 18)
> #define DWC3_NUM_EPS_MASK (0x3f << 12)
> #define DWC3_NUM_EPS(p) (((p)->hwparams3 & \
> @@ -672,6 +681,8 @@ struct dwc3 {
> struct phy *usb2_generic_phy;
> struct phy *usb3_generic_phy;
>
> + struct ulpi_interface *ulpi;
> +
> void __iomem *regs;
> size_t regs_size;
>
> @@ -922,4 +933,14 @@ static inline int dwc3_gadget_resume(struct dwc3 *dwc)
> }
> #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
>
> +#if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
> +int dwc3_ulpi_init(struct dwc3 *dwc);
> +void dwc3_ulpi_exit(struct dwc3 *dwc);
> +#else
> +static inline int dwc3_ulpi_init(struct dwc3 *dwc)
> +{ return 0; }
> +static inline void dwc3_ulpi_exit(struct dwc3 *dwc)
> +{ }
> +#endif
> +
> #endif /* __DRIVERS_USB_DWC3_CORE_H */
> diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
> new file mode 100644
> index 0000000..e1f152b
> --- /dev/null
> +++ b/drivers/usb/dwc3/ulpi.c
> @@ -0,0 +1,110 @@
> +/**
> + * ulpi.c - DesignWare USB3 ULPI PHY interface
> + *
> + * Copyright (C) 2013 Intel Corporation
> + *
> + * Author: Heikki Krogerus <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/phy/ulpi.h>
> +
> +#include "core.h"
> +#include "io.h"
> +
> +#define DWC3_ULPI_ADDR(a) \
> + ((a >= ULPI_EXT_VENDOR_SPECIFIC) ? \
> + DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \
> + DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a))
> +
> +static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
> +{
> + unsigned count = 100;
> + u32 reg;
> +
> + while (count) {
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
> + if (!(reg & DWC3_GUSB2PHYACC_BUSY))
> + return 0;
> + count--;
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int dwc3_ulpi_read(struct ulpi_interface *ulpi, u8 addr)
> +{
> + struct dwc3 *dwc = ulpi->priv;
> + int ret;
> + u32 reg;
> +
> + reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
> +
> + ret = dwc3_ulpi_busyloop(dwc);
> + if (ret)
> + return ret;
> +
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
> +
> + return DWC3_GUSB2PHYACC_DATA(reg);
> +}
> +
> +static int dwc3_ulpi_write(struct ulpi_interface *ulpi, u8 addr, u8 val)
> +{
> + struct dwc3 *dwc = ulpi->priv;
> + int ret;
> + u32 reg;
> +
> + reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
> + reg |= DWC3_GUSB2PHYACC_WRITE | val;
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
> +
> + ret = dwc3_ulpi_busyloop(dwc);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +int dwc3_ulpi_init(struct dwc3 *dwc)
call this from dwc3-pci? I mean we should have this function only to create a
ulpi device.
> +{
> + int ret;
> +
> + /* First check if there is ULPI PHY */
> + ret = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3);
> + if (!(ret & DWC3_ULPI_HSPHY))
> + return 0;
> +
> + /* Register the interface */
> + dwc->ulpi = ulpi_new_interface(dwc->dev,
> + dwc3_ulpi_read, dwc3_ulpi_write, dwc);
> + if (IS_ERR(dwc->ulpi)) {
> + dev_err(dwc->dev, "failed to register ULPI interface");
> + return PTR_ERR(dwc->ulpi);
> + }
> +
> + /* Get the ULPI phy instance
> + * REVISIT: There should be no need to get it separately here.
> + */
> + dwc->usb2_generic_phy = devm_phy_get(dwc->dev, ULPI_PORT_NAME);
You shouldn't be needing this. It should get the phy from dwc3 core probe
itself.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
