On Friday 06 December 2013 03:28 PM, Felipe Balbi wrote:
> Hi,
>
> On Wed, Dec 04, 2013 at 03:10:07PM -0500, WingMan Kwok wrote:
>> Add Keystone platform specific glue layer to support
>> USB3 Host mode.
>>
>> Cc: Santosh Shilimkar <[email protected]>
>> Cc: Felipe Balbi <[email protected]>
>> Cc: Greg Kroah-Hartman <[email protected]>
>> Signed-off-by: WingMan Kwok <[email protected]>
>> ---
>> drivers/usb/dwc3/Kconfig | 7 ++
>> drivers/usb/dwc3/Makefile | 1 +
>> drivers/usb/dwc3/dwc3-keystone.c | 210
>> ++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 218 insertions(+)
>> create mode 100644 drivers/usb/dwc3/dwc3-keystone.c
[..]
>> +static irqreturn_t dwc3_keystone_interrupt(int irq, void *_kdwc)
>> +{
>> + struct dwc3_keystone *kdwc = _kdwc;
>> +
>> + spin_lock(&kdwc->lock);
>
> Isn't this lock unnecessary ? This handler will run with IRQs disabled
> anyway.
>
Indeed.
>> + kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_CLR_0, USBSS_IRQ_COREIRQ_CLR);
>> + kdwc3_writel(kdwc->usbss, USBSS_IRQSTATUS_0, USBSS_IRQ_EVENT_ST);
>> + kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, USBSS_IRQ_COREIRQ_EN);
>> + kdwc3_writel(kdwc->usbss, USBSS_IRQ_EOI, USBSS_IRQ_EOI_LINE(0));
>> + spin_unlock(&kdwc->lock);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int kdwc3_probe(struct platform_device *pdev)
>> +{
>> + struct device_node *node = pdev->dev.of_node;
>> + struct device *dev = &pdev->dev;
>
> if you invert these lines, it'll look a little nicer:
>
> struct device *dev = &pdev->dev;
> struct device_node *node = dev->of_node;
>
> everything else looks pretty good, thanks
>
Looks good to me as well. With above update,
Acked-by: Santosh Shilimkar <[email protected]>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
