Here is the updated version of the series which addresses comments from earlier version [1]. The lock in the isr is removed as per the discussion.
Series adds USB host support for Keystone SOCs. Keystone SOCs uses dwc3 hardware IP implementation. On Keystone II platforms, we use no-op phy driver. Patchset are tested on Keystone II EVM with USB2.0 and USB3.0 flash drives along with dts changes. Cc: Felipe Balbi <ba...@ti.com> Cc: Santosh Shilimkar <santosh.shilim...@ti.com> WingMan Kwok (2): usb: dwc3: Add Keystone specific glue layer usb: phy: Add keystone usb phy driver drivers/usb/dwc3/Kconfig | 7 ++ drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-keystone.c | 205 ++++++++++++++++++++++++++++++++++++++ drivers/usb/phy/Kconfig | 10 ++ drivers/usb/phy/Makefile | 1 + drivers/usb/phy/phy-keystone.c | 142 ++++++++++++++++++++++++++ 6 files changed, 366 insertions(+) create mode 100644 drivers/usb/dwc3/dwc3-keystone.c create mode 100644 drivers/usb/phy/phy-keystone.c [1] http://www.spinics.net/lists/linux-usb/msg98861.html -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
