On Tue, Dec 17, 2013 at 05:48:33PM +0100, [email protected] wrote:
> From: Andreas Naumann <[email protected]>
>
> This is a hard to reproduce problem which leads to non-functional
> USB-OTG port in 0.1%-1% of all boots. Tracked it down to commit
> e25bec160158abe86c276d7d206264afc3646281, which introduces save/restore
> of OTG_INTERFSEL over suspend.
> Since the resume function is also called early in driver init, it uses a
> non-initialized value (which is 0 and a non-supported setting in DM37xx
> for INTERFSEL). Shortly after the correct value is set. Apparently this
> works most time, but not always.
>
> Fix it by not writing the value on runtime resume if it has not been
> initialized yet.
>
> Signed-off-by: Andreas Naumann <[email protected]>
> ---
> Even though I find the implementation a bit awkward this should fix
> the issue without breaking anything else. Hope everyone is happy
> with this.
>
> drivers/usb/musb/omap2430.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> index 4315d35..fbe2c08 100644
> --- a/drivers/usb/musb/omap2430.c
> +++ b/drivers/usb/musb/omap2430.c
> @@ -48,6 +48,7 @@ struct omap2430_glue {
> enum omap_musb_vbus_id_status status;
> struct work_struct omap_musb_mailbox_work;
> struct device *control_otghs;
> + u8 initialized;
> };
> #define glue_to_musb(g) platform_get_drvdata(g->musb)
>
> @@ -383,6 +384,7 @@ static int omap2430_musb_init(struct musb *musb)
> }
>
> musb_writel(musb->mregs, OTG_INTERFSEL, l);
> + glue->initialized = 1;
>
> pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
> "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
> @@ -509,6 +511,7 @@ static int omap2430_probe(struct platform_device *pdev)
> glue->dev = &pdev->dev;
> glue->musb = musb;
> glue->status = OMAP_MUSB_UNKNOWN;
> + glue->initialized = 0;
You don't need to do this. 'glue' was already allocated with kzalloc().
>
> if (np) {
> pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> @@ -646,7 +649,8 @@ static int omap2430_runtime_resume(struct device *dev)
>
> if (musb) {
> omap2430_low_level_init(musb);
> - musb_writel(musb->mregs, OTG_INTERFSEL,
> + if(glue->initialized)
Are you sure this is thread safe?
If you're sending this patch it means runtime_resume can be called
before omap2430_must_init(), but how about at the same time?
You defined 'initialized' as u8 type, then read/write operations won't
be atomic in ARM.
Br, David Cohen
> + musb_writel(musb->mregs, OTG_INTERFSEL,
> musb->context.otg_interfsel);
>
> usb_phy_set_suspend(musb->xceiv, 0);
> --
> 1.8.4.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
