On Thu, Dec 19, 2013 at 12:01:47PM +0800, Huang Rui wrote:
> On Wed, Dec 18, 2013 at 03:40:11PM +0530, Roger Quadros wrote:
> > In test_halt() we set an endpoint halt condition and return on halt
> > verification
> > failure, then the enpoint will remain halted and all further tests related
^^^^^^^
> > to that enpoint will fail. This is because we don't tackle endpoint halt
> > error condition
^^^^^^^
BTW, please fix these typo.
Thanks,
Rui
> > in any of the tests. To avoid that situation, make sure to clear the
> > halt condition before exiting test_halt().
> >
> > Signed-off-by: Roger Quadros <rog...@ti.com>
> > Reviewed-by: Felipe Balbi <ba...@ti.com>
>
> Acked-by: Huang Rui <ray.hu...@amd.com>
>
> > ---
> > drivers/usb/misc/usbtest.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
> > index 6294e1b..300b726 100644
> > --- a/drivers/usb/misc/usbtest.c
> > +++ b/drivers/usb/misc/usbtest.c
> > @@ -1545,8 +1545,17 @@ static int test_halt(struct usbtest_dev *tdev, int
> > ep, struct urb *urb)
> > return retval;
> > }
> > retval = verify_halted(tdev, ep, urb);
> > - if (retval < 0)
> > + if (retval < 0) {
> > + int ret;
> > +
> > + /* clear halt anyways, else further tests will fail */
> > + ret = usb_clear_halt(urb->dev, urb->pipe);
> > + if (ret)
> > + ERROR(tdev, "ep %02x couldn't clear halt, %d\n",
> > + ep, ret);
> > +
> > return retval;
> > + }
> >
> > /* clear halt (tests API + protocol), verify it worked */
> > retval = usb_clear_halt(urb->dev, urb->pipe);
> > --
> > 1.8.3.2
> >
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
