Signed-off-by: Rahul Bedarkar <[email protected]>
---
drivers/usb/musb/blackfin.c | 4 ++--
drivers/usb/musb/musb_core.c | 6 +++---
drivers/usb/musb/musb_cppi41.c | 2 +-
drivers/usb/musb/musb_host.c | 2 +-
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index d9692f7..ef023b9 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -77,7 +77,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const
u8 *src)
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
SSYNC();
- /* Wait for compelete */
+ /* Wait for complete */
while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
cpu_relax();
@@ -131,7 +131,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8
*dst)
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
SSYNC();
- /* Wait for compelete */
+ /* Wait for complete */
while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
cpu_relax();
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4d4499b..d33eb3b 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -83,7 +83,7 @@
* This gets many kinds of configuration information:
* - Kconfig for everything user-configurable
* - platform_device for addressing, irq, and platform_data
- * - platform_data is mostly for board-specific informarion
+ * - platform_data is mostly for board-specific information
* (plus recentrly, SOC or family details)
*
* Most of the conditional compilation will (someday) vanish.
@@ -1187,7 +1187,7 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
/* EP0 reserved endpoint for control, bidirectional;
- * EP1 reserved for bulk, two unidirection halves.
+ * EP1 reserved for bulk, two unidirectional halves.
*/
if (hw_ep->epnum == 1)
musb->bulk_ep = hw_ep;
@@ -1857,7 +1857,7 @@ musb_init_controller(struct device *dev, int nIrq, void
__iomem *ctrl)
/* The musb_platform_init() call:
* - adjusts musb->mregs
* - sets the musb->isr
- * - may initialize an integrated tranceiver
+ * - may initialize an integrated transceiver
* - initializes musb->xceiv, usually by otg_get_phy()
* - stops powering VBUS
*
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index a12bd30..f889296 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -615,7 +615,7 @@ static int cppi41_dma_controller_start(struct
cppi41_dma_controller *controller)
dc = dma_request_slave_channel(dev, str);
if (!dc) {
- dev_err(dev, "Falied to request %s.\n", str);
+ dev_err(dev, "Failed to request %s.\n", str);
ret = -EPROBE_DEFER;
goto err;
}
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 6582a20..b6c95b2 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2013,7 +2013,7 @@ static int musb_schedule(
head = &musb->out_bulk;
/* Enable bulk RX/TX NAK timeout scheme when bulk requests are
- * multiplexed. This scheme doen't work in high speed to full
+ * multiplexed. This scheme does not work in high speed to full
* speed scenario as NAK interrupts are not coming from a
* full speed device connected to a high speed device.
* NAK timeout interval is 8 (128 uframe or 16ms) for HS and
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
