Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-rc7 (peterp@bach) (gcc version 4.8.2 (Debian 4.8.2-12) ) #1 SMP PREEMPT Tue Jan 7 18:21:00 CET 2014
Command line: BOOT_IMAGE=3.13.0-rc7 ro root=LABEL=RootFS
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000beebdfff] usable
BIOS-e820: [mem 0x00000000beebe000-0x00000000bf6bdfff] reserved
BIOS-e820: [mem 0x00000000bf6be000-0x00000000bf7bdfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7be000-0x00000000bf7fefff] ACPI data
BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP EliteBook 8560p/1618, BIOS 68SCF Ver. F.42 07/15/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x43e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0FFC00000 mask FFFC00000 write-protect
  1 base 000000000 mask F80000000 write-back
  2 base 080000000 mask FC0000000 write-back
  3 base 100000000 mask F00000000 write-back
  4 base 200000000 mask E00000000 write-back
  5 base 400000000 mask FC0000000 write-back
  6 base 43E000000 mask FFE000000 uncachable
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x0170b000, 0x0170bfff] PGTABLE
BRK [0x0170c000, 0x0170cfff] PGTABLE
BRK [0x0170d000, 0x0170dfff] PGTABLE
init_memory_mapping: [mem 0x43de00000-0x43dffffff]
 [mem 0x43de00000-0x43dffffff] page 2M
BRK [0x0170e000, 0x0170efff] PGTABLE
init_memory_mapping: [mem 0x43c000000-0x43ddfffff]
 [mem 0x43c000000-0x43ddfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x43bffffff]
 [mem 0x400000000-0x43bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbeebdfff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xbedfffff] page 2M
 [mem 0xbee00000-0xbeebdfff] page 4k
init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
 [mem 0xbf7ff000-0xbf7fffff] page 4k
BRK [0x0170f000, 0x0170ffff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
 [mem 0x100000000-0x3ffffffff] page 2M
BRK [0x01710000, 0x01710fff] PGTABLE
RAMDISK: [mem 0x7fb9b000-0x7fffffff]
ACPI: RSDP 00000000000f2f60 000024 (v02 HPQOEM)
ACPI: XSDT 00000000bf7fe120 000084 (v01 HPQOEM SLIC-MPC 0000000F      01000013)
ACPI: FACP 00000000bf7fc000 0000F4 (v03 HPQOEM 161A     0000000F HP   00000001)
ACPI: DSDT 00000000bf7d1000 025C67 (v02 HPQOEM 161A     00000001 INTL 20060912)
ACPI: FACS 00000000bf788000 000040
ACPI: HPET 00000000bf7fb000 000038 (v01 HPQOEM 161A     00000001 HP   00000001)
ACPI: APIC 00000000bf7fa000 0000BC (v01 HPQOEM 161A     00000001 HP   00000001)
ACPI: MCFG 00000000bf7f9000 00003C (v01 HPQOEM 161A     00000001 HP   00000001)
ACPI: TCPA 00000000bf7f7000 000032 (v02 HPQOEM 161A     00000000 HP   00000001)
ACPI: SSDT 00000000bf7ce000 000283 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 00000000bf7cd000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 00000000bf7cc000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: SSDT 00000000bf7cb000 000810 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 00000000bf7ca000 0009B1 (v01  PmRef    CpuPm 00003000 INTL 20060912)
ACPI: DMAR 00000000bf7c9000 0000B0 (v01 INTEL      SNB  00000001 INTL 00000001)
ACPI: ASF! 00000000bf7f8000 0000A5 (v32 HPQOEM 161A     00000001 HP   00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043dffffff]
Initmem setup node 0 [mem 0x00000000-0x43dffffff]
  NODE_DATA [mem 0x43dfee000-0x43dff1fff]
 [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042d600000-ffff88043d5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x43dffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0xbeebdfff]
  node   0: [mem 0xbf7ff000-0xbf7fffff]
  node   0: [mem 0x100000000-0x43dffffff]
On node 0 totalpages: 4181596
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 12155 pages used for memmap
  DMA32 zone: 777919 pages, LIFO batch:31
  Normal zone: 53120 pages used for memmap
  Normal zone: 3399680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbeebe000-0xbf6bdfff]
PM: Registered nosave memory: [mem 0xbf6be000-0xbf7bdfff]
PM: Registered nosave memory: [mem 0xbf7be000-0xbf7fefff]
PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88043dc00000 s75264 r8192 d23040 u262144
pcpu-alloc: s75264 r8192 d23040 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4116236
Policy zone: Normal
Kernel command line: BOOT_IMAGE=3.13.0-rc7 ro root=LABEL=RootFS
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 16385308K/16726384K available (3956K kernel code, 437K rwdata, 1384K rodata, 776K init, 616K bss, 341076K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
	Dump stacks of tasks blocking RCU-preempt GP.
	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
NR_IRQS:4352 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2693.801 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.60 BogoMIPS (lpj=2693801)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 16K (ffffffff8166b000 - ffffffff8166f000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
dmar: Host address width 36
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000bf69b000 end: 0x000000bf6bafff
IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 0
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21550.40 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbf6be000-0xbf7bdfff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bf646718 00069C (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00069C (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
ACPI: SSDT 00000000bf647a98 000303 (v01  PmRef    ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20060912)
ACPI: SSDT 00000000bf645d98 000119 (v01  PmRef    ApCst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20060912)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (on)
ACPI: Power Resource [LPP] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd4524000-0xd452400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io  0x5050-0x5057]
pci 0000:00:16.3: reg 0x14: [mem 0xd452b000-0xd452bfff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd4500000-0xd451ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd452a000-0xd452afff]
pci 0000:00:19.0: reg 0x18: [io  0x5020-0x503f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd4529000-0xd45293ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd4520000-0xd4523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd4528000-0xd45283ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
pci 0000:00:1f.2: reg 0x14: [io  0x505c-0x505f]
pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
pci 0000:00:1f.2: reg 0x1c: [io  0x5058-0x505b]
pci 0000:00:1f.2: reg 0x20: [io  0x5000-0x501f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd4527000-0xd45277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd4400000-0xd441ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io  0x4000-0x40ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd4420000-0xd4423fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xd4400000-0xd44fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [mem 0xd4300000-0xd43fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03-23]
pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:24:00.0: [197b:2380] type 00 class 0x0c0010
pci 0000:24:00.0: reg 0x10: [mem 0xd4200000-0xd42007ff]
pci 0000:24:00.0: reg 0x14: [mem 0xd4205000-0xd42050ff]
pci 0000:24:00.1: [197b:2392] type 00 class 0x088000
pci 0000:24:00.1: reg 0x10: [mem 0xd4204000-0xd42040ff]
pci 0000:24:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
pci 0000:24:00.2: [197b:2391] type 00 class 0x080501
pci 0000:24:00.2: reg 0x10: [mem 0xd4203000-0xd42030ff]
pci 0000:00:1c.2: PCI bridge to [bus 24]
pci 0000:00:1c.2:   bridge window [mem 0xd4200000-0xd42fffff]
pci 0000:25:00.0: [8086:0085] type 00 class 0x028000
pci 0000:25:00.0: reg 0x10: [mem 0xd4100000-0xd4101fff 64bit]
pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
pci 0000:25:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 25]
pci 0000:00:1c.3:   bridge window [mem 0xd4100000-0xd41fffff]
pci 0000:26:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:26:00.0: reg 0x10: [mem 0xd4000000-0xd4001fff 64bit]
pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 26]
pci 0000:00:1c.7:   bridge window [mem 0xd4000000-0xd40fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbeebe000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43e000000-0x43fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0x00000000-0x00000fff] could not be reserved
system 00:00: [mem 0xd4600000-0xd4600fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io  0x0200-0x027f] has been reserved
system 00:06: [io  0x1000-0x100f] has been reserved
system 00:06: [io  0xffff] has been reserved
system 00:06: [io  0xffff] has been reserved
system 00:06: [io  0x0400-0x047f] could not be reserved
system 00:06: [io  0x0500-0x057f] has been reserved
system 00:06: [io  0xef80-0xef9f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: Plug and Play ACPI device, IDs SYN017c SYN0100 SYN0002 PNP0f13 (active)
pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:24:00.1: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-23] add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4700000-0xd48fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd4900000-0xd49fffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd4440000-0xd445ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xd4400000-0xd44fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [mem 0xd4300000-0xd43fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03-23]
pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xd4700000-0xd48fffff 64bit pref]
pci 0000:24:00.1: BAR 6: assigned [mem 0xd4900000-0xd4907fff pref]
pci 0000:00:1c.2: PCI bridge to [bus 24]
pci 0000:00:1c.2:   bridge window [mem 0xd4200000-0xd42fffff]
pci 0000:00:1c.2:   bridge window [mem 0xd4900000-0xd49fffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 25]
pci 0000:00:1c.3:   bridge window [mem 0xd4100000-0xd41fffff]
pci 0000:00:1c.7: PCI bridge to [bus 26]
pci 0000:00:1c.7:   bridge window [mem 0xd4000000-0xd40fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xd4400000-0xd44fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xd4300000-0xd43fffff]
pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd3ffffff]
pci_bus 0000:03: resource 2 [mem 0xd4700000-0xd48fffff 64bit pref]
pci_bus 0000:24: resource 1 [mem 0xd4200000-0xd42fffff]
pci_bus 0000:24: resource 2 [mem 0xd4900000-0xd49fffff pref]
pci_bus 0000:25: resource 1 [mem 0xd4100000-0xd41fffff]
pci_bus 0000:26: resource 1 [mem 0xd4000000-0xd40fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4500K (ffff88007fb9b000 - ffff880080000000)
DMAR: No ATSR found
IOMMU 0 0xfed91000: using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbf69b000 - 0xbf6bafff]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xbf69b000 - 0xbf6bafff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1389194627.686:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 32140
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
pci 0000:24:00.1: Signaling PME through PCIe PME interrupt
pci 0000:24:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:26:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527180 irq 47
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527380 irq 47
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
Loading compiled-in X.509 certificates
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: KINGSTON SH103S3480G, 501ABBF0, max UDMA/133
ata1.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SH103S3 501A PQ: 0 ANSI: 5
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATAPI: hp      DVD A  DS8A5LH, 1H68, max UDMA/100
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            hp       DVD A  DS8A5LH   1H68 PQ: 0 ANSI: 5
ata4: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 2693.880 MHz
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 776K (ffffffff815a9000 - ffffffff8166b000)
systemd-udevd[79]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
xhci_hcd 0000:26:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:26:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:26:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:26:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:26:00.0: irq 53 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-rc7 xhci_hcd
usb usb1: SerialNumber: 0000:26:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 2
thermal LNXTHERM:00: registered as thermal_zone1
ACPI: Thermal Zone [CPUZ] (63 C)
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-rc7 xhci_hcd
usb usb2: SerialNumber: 0000:26:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
thermal LNXTHERM:01: registered as thermal_zone2
ACPI: Thermal Zone [GFXZ] (58 C)
thermal LNXTHERM:02: registered as thermal_zone3
ACPI: Thermal Zone [EXTZ] (39 C)
firewire_ohci 0000:24:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
sdhci-pci 0000:24:00.1: SDHCI controller found [197b:2392] (rev 30)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:24:00.1] using DMA
sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30)
sdhci-pci 0000:24:00.2: Refusing to bind to secondary interface.
thermal LNXTHERM:03: registered as thermal_zone4
ACPI: Thermal Zone [LOCZ] (45 C)
thermal LNXTHERM:04: registered as thermal_zone5
ACPI: Thermal Zone [BATZ] (34 C)
thermal LNXTHERM:05: registered as thermal_zone6
ACPI: Thermal Zone [PCHZ] (0 C)
thermal LNXTHERM:06: registered as thermal_zone7
ACPI: Thermal Zone [DM1Z] (0 C)
thermal LNXTHERM:07: registered as thermal_zone8
ACPI: Thermal Zone [DM2Z] (0 C)
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 9c:8e:99:3e:0b:e4
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4529000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-rc7 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4528000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-rc7 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
systemd-udevd[370]: starting version 204
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
ACPI: AC Adapter [AC] (on-line)
0000:00:16.3: ttyS1 at I/O 0x5050 (irq = 17, base_baud = 115200) is a 16550A
ACPI: Video Device [DGFX] (multi-head: yes  rom: no  post: no)
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits 3DC sensor found
tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
acpi device:02: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ACPI: Power Button [PWRF]
wmi: Mapper loaded
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Initialized drm 1.1.0 20060810
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:25:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:25:00.0: irq 54 for MSI/MSI-X
usb 3-1: new high-speed USB device number 2 using ehci-pci
iwlwifi 0000:25:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[drm] radeon kernel modesetting enabled.
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x161A).
[drm] register mmio base: 0xD4400000
[drm] register mmio size: 131072
ATOM BIOS: HP
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 8228276 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU0 updated to revision 0x29, date = 2013-06-12
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU1 updated to revision 0x29, date = 2013-06-12
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
firewire_core 0000:24:00.0: created device fw0: GUID ffe473fffffffffe, S400
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU2 updated to revision 0x29, date = 2013-06-12
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU3 updated to revision 0x29, date = 2013-06-12
perf_event_intel: PEBS enabled due to microcode update
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
random: nonblocking pool is initialized
[drm] Loading CAICOS Microcode
[drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800beab8c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800beab8c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90012332118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 56 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 1 usecs
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
tpm_tis 00:03: TPM is disabled/deactivated (0x7)
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
input: HP WMI hotkeys as /devices/virtual/input/input11
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[drm] ib test on ring 5 succeeded
usb 4-1: new high-speed USB device number 2 using ehci-pci
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   LVDS-1
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm]   DP-1
[drm]   HPD1
[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm]   DP-2
[drm]   HPD2
[drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm]   DP-3
[drm]   HPD3
[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm]   Encoders:
[drm]     DFP3: INTERNAL_UNIPHY2
[drm] Connector 4:
[drm]   VGA-1
[drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 3-1.1: new full-speed USB device number 3 using ehci-pci
usb 3-1.1: New USB device found, idVendor=138a, idProduct=003c
usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 3-1.1: SerialNumber: 00b0c072c388
usb 3-1.2: new high-speed USB device number 4 using ehci-pci
usb 3-1.2: New USB device found, idVendor=03f0, idProduct=3a1d
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: HP hs2340 HSPA+ MobileBroadband
usb 3-1.2: Manufacturer: HP
usb 3-1.2: SerialNumber: DB2003EB289DF240
[drm] fb mappable at 0xC0474000
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input10
[drm] vram apper at 0xC0000000
[drm] size 5787648
[drm] fb depth is 24
[drm]    pitch is 6400
fbcon: radeondrmfb (fb0) is primary device
usb 4-1.4: new high-speed USB device number 3 using ehci-pci
usb 4-1.4: New USB device found, idVendor=0461, idProduct=4dce
usb 4-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 4-1.4: Product: HP HD Webcam [Fixed]
usb 4-1.4: Manufacturer: Primax Electronics Ltd.
usb 4-1.4: SerialNumber: PMX02
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (0461:4dce)
WARNING! power/level is deprecated; use power/control instead
cdc_wdm 3-1.2:1.5: cdc-wdm0: USB WDM device
cdc_wdm 3-1.2:1.8: cdc-wdm1: USB WDM device
usbcore: registered new interface driver cdc_wdm
cdc_acm 3-1.2:1.1: ttyACM0: USB ACM device
cdc_acm 3-1.2:1.3: ttyACM1: USB ACM device
cdc_acm 3-1.2:1.9: ttyACM2: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
cdc_ncm 3-1.2:1.6: MAC-Address: 02:80:37:ec:02:00
cdc_ncm 3-1.2:1.6 usb0: register 'cdc_ncm' at usb-0000:00:1a.0-1.2, CDC NCM, 02:80:37:ec:02:00
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver cdc_mbim
input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input19
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Console: switching to colour frame buffer device 200x56
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 57 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xd00033/0x640000/0xa0400, board id: 1621, fw id: 730422
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input18
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
loop: module loaded
fuse init (API version 7.22)
NET: Registered protocol family 10
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x28e offMax=0xfc3
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.6 (interface 0x001a0007).
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxpci: IOMMU found
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
cdc_ncm 3-1.2:1.6 usb0: network connection: disconnected
type=1006 audit(1389194634.626:2): pid=3032 uid=0 old auid=4294967295 new auid=115 old ses=4294967295 new ses=1 res=1
systemd-logind[3038]: New seat seat0.
systemd-logind[3038]: Watching system buttons on /dev/input/event4 (Power Button)
systemd-logind[3038]: Watching system buttons on /dev/input/event1 (Video Bus)
systemd-logind[3038]: Watching system buttons on /dev/input/event3 (Lid Switch)
systemd-logind[3038]: Watching system buttons on /dev/input/event2 (Sleep Button)
systemd-logind[3038]: New session 1 of user Debian-gdm.
systemd-logind[3038]: Linked /tmp/.X11-unix/X0 to /run/user/115/X11-display.
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
type=1006 audit(1389194639.691:3): pid=3318 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
systemd-logind[3038]: New session 2 of user peterp.
systemd-logind[3038]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
systemd-logind[3038]: Removed session 1.
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=1058, idProduct=1230
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: My Book 1230
usb 2-2: Manufacturer: Western Digital
usb 2-2: SerialNumber: 574D43344E30323438393836
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
scsi 6:0:0:0: Direct-Access     WD       My Book 1230     1050 PQ: 0 ANSI: 6
scsi 6:0:0:1: Enclosure         WD       SES Device       1050 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: Attached scsi generic sg3 type 13
sd 6:0:0:0: [sdb] Spinning up disk...
.........ready
sd 6:0:0:0: [sdb] 732558336 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 53 00 10 08
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 732558336 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: unknown partition table
sd 6:0:0:0: [sdb] 732558336 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
xhci_hcd 0000:26:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88041cd2cc00
xhci_hcd 0000:26:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88041cd2cc40
