2014/1/14 Florian Fainelli <[email protected]>:
> Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet")
> changed the ENETDMA[CS] macros such that they are no longer macros, but
> actual register offset definitions. The bcm63xx_udc driver was not
> updated, and as a result, causes the following build error to pop up:
Felipe, Greg, any feedback on this patch? Can we get this merged since
this fixes a build failure?
Thanks!
>
> CC drivers/usb/gadget/u_ether.o
> drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write':
> drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not
> a function
> drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel':
> drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not
> a function
> drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not
> a function
>
> Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to
> take an extra channel argument, and use the channel width
> (ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence
> doing again what the macro implicitely did for us.
>
> CC: Kevin Cernekee <[email protected]>
> CC: Jonas Gorski <[email protected]>
> CC: [email protected]
> Signed-off-by: Florian Fainelli <[email protected]>
> ---
> Felipe,
>
> This is against your branch as balbi/usb.git, and this fix should be applied
> to
> stable 3.11 onwards.
>
> Thanks!
>
> drivers/usb/gadget/bcm63xx_udc.c | 58
> ++++++++++++++++++++++------------------
> 1 file changed, 32 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/usb/gadget/bcm63xx_udc.c
> b/drivers/usb/gadget/bcm63xx_udc.c
> index 2ac7a8f..4c7b47f 100644
> --- a/drivers/usb/gadget/bcm63xx_udc.c
> +++ b/drivers/usb/gadget/bcm63xx_udc.c
> @@ -361,24 +361,30 @@ static inline void usb_dma_writel(struct bcm63xx_udc
> *udc, u32 val, u32 off)
> bcm_writel(val, udc->iudma_regs + off);
> }
>
> -static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
> +static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
> {
> - return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
> + return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
> + (ENETDMA_CHAN_WIDTH * chan));
> }
>
> -static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
> +static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
> + int chan)
> {
> - bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
> + bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
> + (ENETDMA_CHAN_WIDTH * chan));
> }
>
> -static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
> +static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
> {
> - return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
> + return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
> + (ENETDMA_CHAN_WIDTH * chan));
> }
>
> -static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
> +static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
> + int chan)
> {
> - bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
> + bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
> + (ENETDMA_CHAN_WIDTH * chan));
> }
>
> static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
> @@ -639,7 +645,7 @@ static void iudma_write(struct bcm63xx_udc *udc, struct
> iudma_ch *iudma,
> } while (!last_bd);
>
> usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
> - ENETDMAC_CHANCFG_REG(iudma->ch_idx));
> + ENETDMAC_CHANCFG_REG, iudma->ch_idx);
> }
>
> /**
> @@ -695,9 +701,9 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc,
> struct iudma_ch *iudma)
> bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
>
> /* stop DMA, then wait for the hardware to wrap up */
> - usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
> + usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
>
> - while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
> + while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
> ENETDMAC_CHANCFG_EN_MASK) {
> udelay(1);
>
> @@ -714,10 +720,10 @@ static void iudma_reset_channel(struct bcm63xx_udc
> *udc, struct iudma_ch *iudma)
> dev_warn(udc->dev, "forcibly halting IUDMA channel
> %d\n",
> ch_idx);
> usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
> - ENETDMAC_CHANCFG_REG(ch_idx));
> + ENETDMAC_CHANCFG_REG, ch_idx);
> }
> }
> - usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
> + usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
>
> /* don't leave "live" HW-owned entries for the next guy to step on */
> for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
> @@ -729,11 +735,11 @@ static void iudma_reset_channel(struct bcm63xx_udc
> *udc, struct iudma_ch *iudma)
>
> /* set up IRQs, UBUS burst size, and BD base for this channel */
> usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
> - ENETDMAC_IRMASK_REG(ch_idx));
> - usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
> + ENETDMAC_IRMASK_REG, ch_idx);
> + usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
>
> - usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
> - usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
> + usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
> + usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
> }
>
> /**
> @@ -2036,7 +2042,7 @@ static irqreturn_t bcm63xx_udc_data_isr(int irq, void
> *dev_id)
> spin_lock(&udc->lock);
>
> usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
> - ENETDMAC_IR_REG(iudma->ch_idx));
> + ENETDMAC_IR_REG, iudma->ch_idx);
> bep = iudma->bep;
> rc = iudma_read(udc, iudma);
>
> @@ -2176,18 +2182,18 @@ static int bcm63xx_iudma_dbg_show(struct seq_file *s,
> void *p)
> seq_printf(s, " [ep%d]:\n",
> max_t(int, iudma_defaults[ch_idx].ep_num, 0));
> seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x;
> maxburst: %08x\n",
> - usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
> - usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
> - usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
> - usb_dmac_readl(udc,
> ENETDMAC_MAXBURST_REG(ch_idx)));
> + usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
> + usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
> + usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
> + usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG,
> ch_idx));
>
> - sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
> - sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
> + sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
> + sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
> seq_printf(s, " base: %08x; index: %04x_%04x; desc:
> %04x_%04x %08x\n",
> - usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
> + usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
> sram2 >> 16, sram2 & 0xffff,
> sram3 >> 16, sram3 & 0xffff,
> - usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
> + usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
> seq_printf(s, " desc: %d/%d used", iudma->n_bds_used,
> iudma->n_bds);
>
> --
> 1.8.3.2
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
