Toggling port power currently leads to three unintended disconnect
scenarios that are addressed by this rework of port power recovery and
usb device resume:
1/ Superspeed devices downgrade to their hispeed connection: fix this by
preventing superspeed poweroff until the peer port is suspended.
This depends on the ability to identify peer ports (patches 1-4), and
then patch 5 implements the policy.
2/ khubd prematurely disconnects ports that are in the process of
being resumed or reset. khubd now ignores ports in the
pm-runtime-suspended state (patch 9) and holds a lock to synchronize the port
status changes of usb_port_{suspend|resume} (patch 11).
3/ Superspeed devices fail to reconnect: Seen during repeated toggles of
the port power state. Fixed by forcing a full recovery cycle of the
usb_device before allowing the next suspend / khubd run (patch 12).
Also, for devices that live lock on reconnect the port runtime resume
path now has the capability to force a reset-resume to be a
warm-reset-resume (patch 13).
New since v3 [1]:
* Addressed Sarah's comment about the FEAT_C_ENABLE patch, split it into
patch 6 and 7 [2]
* Addressed Alan's comments [3] about usb_port_{suspend|resume}
synchronization. Refactored hub_events() (patch 8) and introduced
usb_port.status_lock (patch 11) accordingly
* Clarified the documentation to indicate the perils of unbinding
usbcore interface drivers (lose ability to resume) and added more details
about the ordering policies enforced by the fix for bug 1 above.
* Added patch 10 to fix a long standing xhci bug made more prominent by the
ordering of events forced by the port status lock.
* Clarified a few changelogs and added commentary to the code
[1] v3: http://marc.info/?l=linux-usb&m=138912657113817&w=2
[2] status lock discussion: http://marc.info/?t=138912664200010&r=1&w=2
[3] split FEAT_C_ENABLE patch:
http://marc.info/?l=linux-usb&m=138989014115864&w=2
[4] don't unbind usbcore: http://marc.info/?l=linux-usb&m=138982558731254&w=2
---
[PATCH v4 01/14] usb: assign default peer ports for root hubs
[PATCH v4 02/14] usb: assign usb3 external hub port peers
[PATCH v4 03/14] usb: find internal hub tier mismatch via acpi
[PATCH v4 04/14] usb: sysfs link peer ports
[PATCH v4 05/14] usb: defer suspension of superspeed port while peer is powered
[PATCH v4 06/14] usb: don't clear FEAT_C_ENABLE on usb_port_runtime_resume
failure
[PATCH v4 07/14] usb: usb3 ports do not support FEAT_C_ENABLE
[PATCH v4 08/14] usb: refactor port handling in hub_events()
[PATCH v4 09/14] usb: synchronize port poweroff and khubd
[PATCH v4 10/14] xhci: cancel in-flight resume requests when the port is
powered off
[PATCH v4 11/14] usb: introduce port status lock
[PATCH v4 12/14] usb: guarantee child device resume on port poweron
[PATCH v4 13/14] usb: force warm reset to break resume livelock
[PATCH v4 14/14] usb: documentation for usb port power off mechanisms
Documentation/usb/power-management.txt | 236 ++++++++++++++++++++
drivers/usb/core/hub.c | 372 +++++++++++++++++++-------------
drivers/usb/core/hub.h | 18 ++
drivers/usb/core/port.c | 277 ++++++++++++++++++++++--
drivers/usb/core/usb-acpi.c | 35 ++-
drivers/usb/core/usb.h | 2
drivers/usb/host/xhci-hub.c | 12 +
7 files changed, 770 insertions(+), 182 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
