Hi, On Mon, Mar 03, 2014 at 08:50:33PM +0300, Sergei Shtylyov wrote: > Hello. > > On 03/03/2014 07:44 PM, Felipe Balbi wrote: > > >>Add support of the device tree probing for the Renesas R-Car generation 2 > >>SoCs > >>documenting the device tree binding as necessary. > > >>Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com> > > >Unless someone on devicetree@vger gives me an ACK pretty soon, I'm > >afraid this patch will miss v3.15. > > Ugh, the USB acceptance window is getting very short...
well, -rc5 is already out... I want to have at least 2 weeks of "linux-next soakage" (yes, I just coined a new term heh). Since most releases go up to -rc7, it's about time to close the tree ;-) > >>--- > >>This patch is against the 'next' branch of Felipe Balbi's 'usb.git' repo. > >> > >>Changes in version 2: > >>- restored devm_clk_get() call and the error handling logic in the probe() > >> method, removed clk_put() call in the remove() method. > > >> Documentation/devicetree/bindings/usb/rcar-gen2-phy.txt | 29 +++++++++++ > >> drivers/usb/phy/phy-rcar-gen2-usb.c | 42 > >> ++++++++++++++-- > >> 2 files changed, 68 insertions(+), 3 deletions(-) > > >>Index: usb/Documentation/devicetree/bindings/usb/rcar-gen2-phy.txt > >>=================================================================== > >>--- /dev/null > >>+++ usb/Documentation/devicetree/bindings/usb/rcar-gen2-phy.txt > >>@@ -0,0 +1,29 @@ > >>+* Renesas R-Car generation 2 USB PHY > >>+ > >>+This file provides information on what the device node for the R-Car > >>generation > >>+2 USB PHY contains. > >>+ > >>+Required properties: > >>+- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 > >>SoC. > >>+ "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. > >>+- reg: offset and length of the register block. > >>+- clocks: clock phandle and specifier pair. > >>+- clock-names: string, clock input name, must be "usbhs". > >>+ > >>+Optional properties: > >>+- renesas,channel0-pci: boolean, specify when USB channel 0 should be > >>connected > >>+ to PCI EHCI/OHCI; otherwise, it will be connected to the > >>+ USBHS controller. > >>+- renesas,channel2-pci: boolean, specify when USB channel 2 should be > >>connected > >>+ to PCI EHCI/OHCI; otherwise, it will be connected to the > >>+ USBSS controller (xHCI). > > >I wonder if these two properties should be taken care by pinctrl > >framework instead. > > No, the internal port multiplexing is controlled by the PHY > itself, see the driver source. The same way it was with USB port 1 of > the generation 1 R-Car SoCs. ok, fair enough. -- balbi
signature.asc
Description: Digital signature
