On Sun, Mar 2, 2014 at 10:04 AM, Peter Stuge <pe...@stuge.se> wrote: > > David Mosberger wrote: > > +++ b/drivers/usb/host/Kconfig > > @@ -4,6 +4,16 @@ > > comment "USB Host Controller Drivers" > > depends on USB > > > > +config USB_MAX3421_HCD > > + tristate "MAX3421 HCD (USB-over-SPI) support" > > + depends on USB > > + help > > + The Maxim MAX3421E Host Controller Interface supports > > + standard USB 1.1 high-speed hardware. > > I'd suggest "supports USB 2.0-compliant full-speed devices" instead.
Yeah, that comment was old and wrong. I fixed that per your suggestion, thanks. > And before you assume that high-speed devices (flash drives, wlan, etc) > don't work correctly because of something your driver does I would > strongly recommend to perform the same tests using another full-speed > HC, e.g. by using uhci_hcd as the only hcd, disabling ehci_hcd, on > EHCI hardware. > > I've seen high-speed-capable devices work quite poorly at full-speed; > who cares about correctness when there is performance? At first, we had problems recognizing high-speed devices, but that must have been a silly bug since it got fixed without me even trying. Certainly there can be cases where high-speed devices wouldn't work properly at full speed, but I don't think I'm ready to blame the devices over my driver just yet. I may change my mind on this, of course. ;-) --david -- eGauge Systems LLC, http://egauge.net/, 1.877-EGAUGE1, fax 720.545.9768 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
