switch over to endpoint feature flags so we can
drop naming conventions.
Signed-off-by: Felipe Balbi <[email protected]>
---
drivers/usb/musb/musb_gadget.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d4aa779..f121097 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1727,14 +1727,23 @@ init_peripheral_ep(struct musb *musb, struct musb_ep
*ep, u8 epnum, int is_in)
ep->end_point.name = ep->name;
INIT_LIST_HEAD(&ep->end_point.ep_list);
if (!epnum) {
+ ep->end_point.has_dir_in = true;
+ ep->end_point.has_dir_out = true;
+ ep->end_point.has_control = true;
usb_ep_set_maxpacket_limit(&ep->end_point, 64);
ep->end_point.ops = &musb_g_ep0_ops;
musb->g.ep0 = &ep->end_point;
} else {
- if (is_in)
+ if (is_in) {
+ ep->end_point.has_dir_in = true;
usb_ep_set_maxpacket_limit(&ep->end_point,
hw_ep->max_packet_sz_tx);
- else
+ } else {
+ ep->end_point.has_dir_out = true;
usb_ep_set_maxpacket_limit(&ep->end_point,
hw_ep->max_packet_sz_rx);
+ }
+ ep->end_point.has_bulk = true;
+ ep->end_point.has_interrupt = true;
+ ep->end_point.has_isochronous = true;
ep->end_point.ops = &musb_ep_ops;
list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
}
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
