On Fri, Mar 14, 2014 at 12:48:18PM +0800, Li Jun wrote:
> From: Li Jun <[email protected]>
>
> Use a more general way to read and write otgsc register.
>
> Signed-off-by: Li Jun <[email protected]>
> ---
>
> Changes for v2:
> Use one API for otgsc regiter write, and add mask as input parameter
> for otgsc register target bits read.
>
> drivers/usb/chipidea/core.c | 16 ++++++++++------
> drivers/usb/chipidea/otg.c | 39 ++++++++++++++++++++++++++++++---------
> drivers/usb/chipidea/otg.h | 18 ++----------------
> drivers/usb/chipidea/udc.c | 17 ++++++++++-------
> 4 files changed, 52 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index ca6831c..bc9dcab 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -360,7 +360,7 @@ static irqreturn_t ci_irq(int irq, void *data)
> u32 otgsc = 0;
>
> if (ci->is_otg)
> - otgsc = hw_read(ci, OP_OTGSC, ~0);
> + otgsc = hw_read_otgsc_bits(ci, ~0);
>
> /*
> * Handle id change interrupt, it indicates device/host function
> @@ -368,7 +368,8 @@ static irqreturn_t ci_irq(int irq, void *data)
> */
> if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
> ci->id_event = true;
> - ci_clear_otg_interrupt(ci, OTGSC_IDIS);
> + /* Clear ID change irq status */
> + hw_set_otgsc_bits(ci, OTGSC_IDIS, 0);
> disable_irq_nosync(ci->irq);
> queue_work(ci->wq, &ci->work);
> return IRQ_HANDLED;
> @@ -380,7 +381,8 @@ static irqreturn_t ci_irq(int irq, void *data)
> */
> if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
> ci->b_sess_valid_event = true;
> - ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
> + /* Clear BSV irq */
> + hw_set_otgsc_bits(ci, OTGSC_BSVIS, 0);
> disable_irq_nosync(ci->irq);
> queue_work(ci->wq, &ci->work);
> return IRQ_HANDLED;
> @@ -502,8 +504,9 @@ static void ci_get_otg_capable(struct ci_hdrc *ci)
> == (DCCPARAMS_DC | DCCPARAMS_HC));
> if (ci->is_otg) {
> dev_dbg(ci->dev, "It is OTG capable controller\n");
> - ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
> - ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
> + /* Disable and clear all OTG irq */
> + hw_set_otgsc_bits(ci,
> + OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, 0);
> }
> }
>
> @@ -617,7 +620,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> */
> mdelay(2);
> ci->role = ci_otg_role(ci);
> - ci_enable_otg_interrupt(ci, OTGSC_IDIE);
> + /* Enable ID change irq */
> + hw_set_otgsc_bits(ci, OTGSC_IDIE, OTGSC_IDIE);
> } else {
> /*
> * If the controller is not OTG capable, but support
> diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
> index 39bd7ec..e20101f 100644
> --- a/drivers/usb/chipidea/otg.c
> +++ b/drivers/usb/chipidea/otg.c
> @@ -24,13 +24,38 @@
> #include "otg.h"
>
> /**
> + * hw_read_otgsc_bits returns otgsc register bits value.
> + * bits: target bits to be read.
> + * This function returns register content
> + */
> +u32 hw_read_otgsc_bits(struct ci_hdrc *ci, u32 bits)
> +{
> + return hw_read(ci, OP_OTGSC, bits);
> +}
> +
Using the name hw_read_otgsc please, the usage of this API
is the same of hw_read, just the mask fixed.
> +/**
> + * hw_set_otgsc_bits updates target bits of OTGSC register.
> + * - bits: the target bits to be updated.
> + * - val: the target value to be achieved of those bits.
> + * note: for any bits within OTGSC_INT_STATUS_BITS,
> + * to set them to be 0(clear irq status),
> + * just set val to be 0 like other bits.
> + */
> +void hw_set_otgsc_bits(struct ci_hdrc *ci, u32 bits, u32 val)
> +{
> + u32 otg_int_clear_bits = bits & ~val & OTGSC_INT_STATUS_BITS;
> +
> + hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS,
> + val | otg_int_clear_bits);
> +}
> +
Sorry, it is too complicated. I just want the hw_write_otgsc is
the same usage with hw_write, write to "0" is really write to 0,
write to "1" is really write to "1".
The reason we introduce hw_write_otgsc is just wants the user's life
to be easier, they doesn't need to consider the OTGSC_INT_STATUS_BITS
is cleared unexpected.
Peter
> +/**
> * ci_otg_role - pick role based on ID pin state
> * @ci: the controller
> */
> enum ci_role ci_otg_role(struct ci_hdrc *ci)
> {
> - u32 sts = hw_read(ci, OP_OTGSC, ~0);
> - enum ci_role role = sts & OTGSC_ID
> + enum ci_role role = hw_read_otgsc_bits(ci, OTGSC_ID)
> ? CI_ROLE_GADGET
> : CI_ROLE_HOST;
>
> @@ -39,14 +64,10 @@ enum ci_role ci_otg_role(struct ci_hdrc *ci)
>
> void ci_handle_vbus_change(struct ci_hdrc *ci)
> {
> - u32 otgsc;
> -
> if (!ci->is_otg)
> return;
>
> - otgsc = hw_read(ci, OP_OTGSC, ~0);
> -
> - if (otgsc & OTGSC_BSV)
> + if (hw_read_otgsc_bits(ci, OTGSC_BSV))
> usb_gadget_vbus_connect(&ci->gadget);
> else
> usb_gadget_vbus_disconnect(&ci->gadget);
> @@ -115,6 +136,6 @@ void ci_hdrc_otg_destroy(struct ci_hdrc *ci)
> flush_workqueue(ci->wq);
> destroy_workqueue(ci->wq);
> }
> - ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
> - ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
> + /* Disable all OTG irq and clear status */
> + hw_set_otgsc_bits(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, 0);
> }
> diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
> index 449bee0..149a457 100644
> --- a/drivers/usb/chipidea/otg.h
> +++ b/drivers/usb/chipidea/otg.h
> @@ -11,22 +11,8 @@
> #ifndef __DRIVERS_USB_CHIPIDEA_OTG_H
> #define __DRIVERS_USB_CHIPIDEA_OTG_H
>
> -static inline void ci_clear_otg_interrupt(struct ci_hdrc *ci, u32 bits)
> -{
> - /* Only clear request bits */
> - hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS, bits);
> -}
> -
> -static inline void ci_enable_otg_interrupt(struct ci_hdrc *ci, u32 bits)
> -{
> - hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, bits);
> -}
> -
> -static inline void ci_disable_otg_interrupt(struct ci_hdrc *ci, u32 bits)
> -{
> - hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, 0);
> -}
> -
> +u32 hw_read_otgsc_bits(struct ci_hdrc *ci, u32 bits);
> +void hw_set_otgsc_bits(struct ci_hdrc *ci, u32 bits, u32 val);
> int ci_hdrc_otg_init(struct ci_hdrc *ci);
> void ci_hdrc_otg_destroy(struct ci_hdrc *ci);
> enum ci_role ci_otg_role(struct ci_hdrc *ci);
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> index 7739c64..3bc28d4 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -1844,8 +1844,10 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
> static int udc_id_switch_for_device(struct ci_hdrc *ci)
> {
> if (ci->is_otg) {
> - ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
> - ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
> + /* Clear BSV irq */
> + hw_set_otgsc_bits(ci, OTGSC_BSVIS, 0);
> + /* Enable BSV irq */
> + hw_set_otgsc_bits(ci, OTGSC_BSVIE, OTGSC_BSVIE);
> }
>
> return 0;
> @@ -1853,11 +1855,12 @@ static int udc_id_switch_for_device(struct ci_hdrc
> *ci)
>
> static void udc_id_switch_for_host(struct ci_hdrc *ci)
> {
> - if (ci->is_otg) {
> - /* host doesn't care B_SESSION_VALID event */
> - ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
> - ci_disable_otg_interrupt(ci, OTGSC_BSVIE);
> - }
> + /*
> + * host doesn't care B_SESSION_VALID event
> + * so clear and disbale BSV irq
> + */
> + if (ci->is_otg)
> + hw_set_otgsc_bits(ci, OTGSC_BSVIE | OTGSC_BSVIS, 0);
> }
>
> /**
> --
> 1.7.9.5
>
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
