Override the hub control operation to enable and disable external
regulators for the ports vbus power supply in response to clear/set
USB_PORT_FEAT_POWER requests.
Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Acked-by: Alan Stern <st...@rowland.harvard.edu>
---
drivers/usb/host/ohci-pxa27x.c | 68 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index d21d5fe..e68f3d0 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -30,6 +30,7 @@
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <linux/signal.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -120,6 +121,8 @@ static struct hc_driver __read_mostly ohci_pxa27x_hc_driver;
struct pxa27x_ohci {
struct clk *clk;
void __iomem *mmio_base;
+ struct regulator *vbus[3];
+ bool vbus_enabled[3];
};
#define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)(hcd_to_ohci(hcd)->priv)
@@ -166,6 +169,52 @@ static int pxa27x_ohci_select_pmm(struct pxa27x_ohci
*pxa_ohci, int mode)
return 0;
}
+static int pxa27x_ohci_set_vbus_power(struct pxa27x_ohci *pxa_ohci,
+ unsigned int port, bool enable)
+{
+ struct regulator *vbus = pxa_ohci->vbus[port];
+ int ret = 0;
+
+ if (IS_ERR_OR_NULL(vbus))
+ return 0;
+
+ if (enable && !pxa_ohci->vbus_enabled[port])
+ ret = regulator_enable(vbus);
+ else if (!enable && pxa_ohci->vbus_enabled[port])
+ ret = regulator_disable(vbus);
+
+ if (ret < 0)
+ return ret;
+
+ pxa_ohci->vbus_enabled[port] = enable;
+
+ return 0;
+}
+
+static int pxa27x_ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16
wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd);
+ int ret;
+
+ switch (typeReq) {
+ case SetPortFeature:
+ case ClearPortFeature:
+ if (!wIndex || wIndex > 3)
+ return -EPIPE;
+
+ if (wValue != USB_PORT_FEAT_POWER)
+ break;
+
+ ret = pxa27x_ohci_set_vbus_power(pxa_ohci, wIndex - 1,
+ typeReq == SetPortFeature);
+ if (ret)
+ return ret;
+ break;
+ }
+
+ return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+}
/*-------------------------------------------------------------------------*/
static inline void pxa27x_setup_hc(struct pxa27x_ohci *pxa_ohci,
@@ -372,6 +421,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
struct platform_device
struct ohci_hcd *ohci;
struct resource *r;
struct clk *usb_clk;
+ unsigned int i;
retval = ohci_pxa_of_init(pdev);
if (retval)
@@ -417,6 +467,16 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
struct platform_device
pxa_ohci->clk = usb_clk;
pxa_ohci->mmio_base = (void __iomem *)hcd->regs;
+ for (i = 0; i < 3; ++i) {
+ char name[6];
+
+ if (!(inf->flags & (ENABLE_PORT1 << i)))
+ continue;
+
+ sprintf(name, "vbus%u", i + 1);
+ pxa_ohci->vbus[i] = devm_regulator_get(&pdev->dev, name);
+ }
+
retval = pxa27x_start_hc(pxa_ohci, &pdev->dev);
if (retval < 0) {
pr_debug("pxa27x_start_hc failed");
@@ -462,9 +522,14 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
struct platform_device
void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
{
struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd);
+ unsigned int i;
usb_remove_hcd(hcd);
pxa27x_stop_hc(pxa_ohci, &pdev->dev);
+
+ for (i = 0; i < 3; ++i)
+ pxa27x_ohci_set_vbus_power(pxa_ohci, i, false);
+
usb_put_hcd(hcd);
}
@@ -563,7 +628,10 @@ static int __init ohci_pxa27x_init(void)
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides);
+ ohci_pxa27x_hc_driver.hub_control = pxa27x_ohci_hub_control;
+
return platform_driver_register(&ohci_hcd_pxa27x_driver);
}
module_init(ohci_pxa27x_init);
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
