Hi,

On Thu, Apr 17, 2014 at 1:38 AM, Paul Zimmerman
<paul.zimmer...@synopsys.com> wrote:
>> From: linux-usb-ow...@vger.kernel.org 
>> [mailto:linux-usb-ow...@vger.kernel.org] On Behalf Of sundeep subbaraya
>> Sent: Wednesday, April 16, 2014 3:39 AM
>>
>> Hi Felipe,
>>
>> On Thu, Apr 3, 2014 at 8:28 PM, Felipe Balbi <ba...@ti.com> wrote:
>>
>> >> +static int start_dma(struct xusb_ep *ep, u32 src, u32 dst, u32 length)
>> >
>> > please prepend this with xudc_, it makes tracing a lot easier.
>> >
>> >> +{
>> >> +     struct xusb_udc *udc;
>> >> +     int rc = 0;
>> >> +     unsigned long timeout;
>> >> +
>> >> +     udc = ep->udc;
>> >> +     /*
>> >> +      * Set the addresses in the DMA source and
>> >> +      * destination registers and then set the length
>> >> +      * into the DMA length register.
>> >> +      */
>> >> +     udc->write_fn(udc->base_address, XUSB_DMA_DSAR_ADDR_OFFSET, src);
>> >> +     udc->write_fn(udc->base_address, XUSB_DMA_DDAR_ADDR_OFFSET, dst);
>> >> +     udc->write_fn(udc->base_address, XUSB_DMA_LENGTH_OFFSET, length);
>> >> +
>> >> +     /*
>> >> +      * Wait till DMA transaction is complete and
>> >> +      * check whether the DMA transaction was
>> >> +      * successful.
>> >> +     */
>> >> +     while ((udc->read_fn(ep->udc->base_address + 
>> >> XUSB_DMA_STATUS_OFFSET) &
>> >> +                     XUSB_DMA_DMASR_BUSY) == XUSB_DMA_DMASR_BUSY) {
>> >> +             timeout = jiffies + 10000;
>> >> +
>> >> +             if (time_after(jiffies, timeout)) {
>> >> +                     rc = -ETIMEDOUT;
>> >> +                     goto clean;
>> >> +             }
>> >> +     }
>> >
>> > don't you get an IRQ for DMA completion ? If you do, you could be using
>> > wait_for_completion()
>>
>> This function is called in interrupt context when buffer is ready or
>> free. It initiates
>> DMA to transfer data from IP buffer to memory. Hence it waits in busy
>> loop till DMA
>> completes
>
> If this function is called in interrupt context, then you can't use
> jiffies for your timeout, since jiffies may not get updated while in
> interrupt context.

Yes. It is obvious that this logic is buggy, will change this.

Thanks,
Sundeep.B.S.
>
> --
> Paul
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to