[PATCH v12 03/12] usb: chipidea: host: vbus control change for OTG HNP.

[Li Jun]

Leave vbus on/off hanlded by OTG fsm if in OTG mode.

Signed-off-by: Li Jun <b47...@freescale.com>
---
 drivers/usb/chipidea/host.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index a8ac6c1..ffb4168 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -67,7 +67,11 @@ static int host_start(struct ci_hdrc *ci)
        ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
        ehci->imx28_write_fix = ci->imx28_write_fix;
 
-       if (ci->platdata->reg_vbus) {
+       /*
+        * vbus is always on if host is not in OTG FSM mode,
+        * otherwise should be controlled by OTG FSM
+        */
+       if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
                ret = regulator_enable(ci->platdata->reg_vbus);
                if (ret) {
                        dev_err(ci->dev,
@@ -89,7 +93,7 @@ static int host_start(struct ci_hdrc *ci)
        return ret;
 
 disable_reg:
-       if (ci->platdata->reg_vbus)
+       if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci))
                regulator_disable(ci->platdata->reg_vbus);
 
 put_hcd:
@@ -105,7 +109,7 @@ static void host_stop(struct ci_hdrc *ci)
        if (hcd) {
                usb_remove_hcd(hcd);
                usb_put_hcd(hcd);
-               if (ci->platdata->reg_vbus)
+               if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci))
                        regulator_disable(ci->platdata->reg_vbus);
        }
 }
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html