On Fri, May 2, 2014 at 12:09 PM, Alan Stern <[email protected]> wrote:
> On Thu, 1 May 2014, Dan Williams wrote:
>
>> I've been testing this and the pm_request_resume() ends up leaving the
>> usb device enabled indefinitely. It needs to be paired with a
>> pm_runtime_autosuspend(), but at that point why not just add a
>> usb_autoresume_device_async() helper.
>
> Why didn't pm_request_resume() result in an autosuspend?
Found it.
The last thing pm_runtime_barrier() does is pm_runtime_put_noidle()
which may cause the autosuspend timer to never be reset.
The other bug I had was that my power down scripts were errant in
unbinding the hub driver from 3rd level hubs.
I now have the following in khubd before running port_event() and it
is passing my initial tests (fixes the missed suspend mentioned
above). Will hit it a bit harder with my tests and then re-submit the
series.
/*
* Revalidate the device if it was requested by
* usb_port_runtime_resume.
*/
if (test_and_clear_bit(i,
hub->wakeup_bits) && udev) {
pm_runtime_get_noresume(&udev->dev);
pm_runtime_barrier(&udev->dev);
pm_runtime_put_autosuspend(&udev->dev);
}
Thanks.
--
Dan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
