On Sat, 10 May 2014, Maxime Ripard wrote:
> From: Boris BREZILLON <[email protected]>
>
> On the Allwinner's A31 SoC the reset line connected to the EHCI IP has to
> be deasserted for the EHCI block to be usable.
>
> Add support for an optional reset controller that will be deasserted on
> power off and asserted on power on.
>
> Signed-off-by: Boris BREZILLON <[email protected]>
> Signed-off-by: Maxime Ripard <[email protected]>
> Reviewed-by: Hans de Goede <[email protected]>
This basically is good. fine. I have only two comments, and one of
them is a matter of taste rather than substance.
> @@ -206,6 +208,19 @@ static int ehci_platform_probe(struct platform_device
> *dev)
> break;
> }
> }
> +
> + priv->rst = devm_reset_control_get_optional(&dev->dev,
> + NULL);
I hate the style that matches arguments on a continuation line with the
opening paren of the function call, for a couple of reasons. Instead I
simply indent continuation lines by two or more tab stops. But some
people seem to be incurably attached to it.
> + if (IS_ERR(priv->rst)) {
> + err = PTR_ERR(priv->rst);
> + if (err == -EPROBE_DEFER)
> + goto err_put_clks;
> + priv->rst = NULL;
> + } else {
> + err = reset_control_deassert(priv->rst);
> + if (err)
> + goto err_put_clks;
> + }
> }
>
> if (pdata->big_endian_desc)
The new code was added inside an "if" statement, which will cause it to
apply only to OF devices. Is there any reason not to put the new code
outside the "if" statement, so it applies to all devices?
Alan Stern
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
