Document the device tree bindings for the Renesas USBHS controller.
Signed-off-by: Yoshihiro Shimoda <[email protected]>
---
.../devicetree/bindings/usb/renesas_usbhs.txt | 24 ++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/renesas_usbhs.txt
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
new file mode 100644
index 0000000..e9faa65
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -0,0 +1,24 @@
+Renesas Electronics USBHS driver
+
+Required properties:
+ - compatible: Must contain one of the following:
+ - "renesas,usbhs-r8a7790"
+ - "renesas,usbhs-r8a7791"
+ - reg: Base address and length of the register for the USBHS
+ - interrupts: Interrupt specifier for the USBHS
+ - clocks: A list of phandle + clock specifier pairs
+
+Optional properties:
+ - buswait_bwait: Integer to use BUSWAIT register
+ - enable-gpio: A gpio specifier to check GPIO determining if USB function
+ should be enabled
+ - phys: phandle + phy specifier pair
+ - phy-names: must be "usb"
+
+Example:
+ usbhs: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7790";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
