On Mon, Aug 18, 2014 at 04:54:44AM +0200, Jaša Bartelj wrote:
> Changes two simple if statements to switch statements.
> Fixes some issues reported by checkpatch.pl like whitespace.
> Bracing changes so all arms of a statement have consistent bracing.
Please, only use checkpatch.pl on your own patches before submission.
There's a ton of minor issues that checkpatch would complain about if
run on individual files in the source tree. In fact, some people have
even argued that the -f flag should be removed just to avoid the
submissions of such make-checkpatch-happy patches.
If adding a new feature, or really cleaning up bits of the driver, then
having a go at these minor style issues as part of such a series would
be perfectly fine. Otherwise, it just adds noise and risks introducing
regressions for no real value.
Thanks,
Johan
> Signed-off-by: Jaša Bartelj <jasa.bart...@gmail.com>
> ---
> drivers/usb/serial/ftdi_sio.c | 48
> +++++++++++++++++++++++++--------------
> drivers/usb/serial/ftdi_sio_ids.h | 4 ++--
> 2 files changed, 33 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
> index 19cf267..3340dea 100644
> --- a/drivers/usb/serial/ftdi_sio.c
> +++ b/drivers/usb/serial/ftdi_sio.c
> @@ -58,7 +58,7 @@ struct ftdi_private {
> int custom_divisor; /* custom_divisor kludge, this is for
> baud_base (different from what goes to the
> chip!) */
> - __u16 last_set_data_urb_value ;
> + __u16 last_set_data_urb_value;
> /* the last data state set - needed for doing
> * a break
> */
> @@ -1038,6 +1038,7 @@ static unsigned short int
> ftdi_232am_baud_base_to_divisor(int baud, int base)
> unsigned short int divisor;
> /* divisor shifted 3 bits to the left */
> int divisor3 = base / 2 / baud;
> +
> if ((divisor3 & 0x7) == 7)
> divisor3++; /* round x.7/8 up to x+1 */
> divisor = divisor3 >> 3;
> @@ -1064,6 +1065,7 @@ static __u32 ftdi_232bm_baud_base_to_divisor(int baud,
> int base)
> __u32 divisor;
> /* divisor shifted 3 bits to the left */
> int divisor3 = base / 2 / baud;
> +
> divisor = divisor3 >> 3;
> divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
> /* Deal with special cases for highest baud rates. */
> @@ -1433,16 +1435,23 @@ static int set_serial_info(struct tty_struct *tty,
> check_and_exit:
> if ((old_priv.flags & ASYNC_SPD_MASK) !=
> (priv->flags & ASYNC_SPD_MASK)) {
> - if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
> + switch (priv->flags & ASYNC_SPD_MASK) {
> + case ASYNC_SPD_HI:
> tty->alt_speed = 57600;
> - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
> + break;
> + case ASYNC_SPD_VHI:
> tty->alt_speed = 115200;
> - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
> + break;
> + case ASYNC_SPD_SHI:
> tty->alt_speed = 230400;
> - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
> + break;
> + case ASYNC_SPD_WARP:
> tty->alt_speed = 460800;
> - else
> + break;
> + default:
> tty->alt_speed = 0;
> + break;
> + }
> }
> if (((old_priv.flags & ASYNC_SPD_MASK) !=
> (priv->flags & ASYNC_SPD_MASK)) ||
> @@ -1450,9 +1459,9 @@ check_and_exit:
> (old_priv.custom_divisor != priv->custom_divisor))) {
> change_speed(tty, port);
> mutex_unlock(&priv->cfg_lock);
> - }
> - else
> + } else {
> mutex_unlock(&priv->cfg_lock);
> + }
> return 0;
> }
>
> @@ -1491,8 +1500,6 @@ static void ftdi_determine_type(struct usb_serial_port
> *port)
> dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n",
> __func__,
> version, interfaces);
> if (interfaces > 1) {
> - int inter;
> -
> /* Multiple interfaces.*/
> if (version == 0x0800) {
> priv->chip_type = FT4232H;
> @@ -1502,20 +1509,26 @@ static void ftdi_determine_type(struct
> usb_serial_port *port)
> priv->chip_type = FT2232H;
> /* Hi-speed - baud clock runs at 120MHz */
> priv->baud_base = 120000000 / 2;
> - } else
> + } else {
> priv->chip_type = FT2232C;
> + }
>
> /* Determine interface code. */
> - inter = serial->interface->altsetting->desc.bInterfaceNumber;
> - if (inter == 0) {
> + switch (serial->interface->altsetting->desc.bInterfaceNumber) {
> + case 0:
> priv->interface = INTERFACE_A;
> - } else if (inter == 1) {
> + break;
> + case 1:
> priv->interface = INTERFACE_B;
> - } else if (inter == 2) {
> + break;
> + case 2:
> priv->interface = INTERFACE_C;
> - } else if (inter == 3) {
> + break;
> + case 3:
> priv->interface = INTERFACE_D;
> + break;
> }
> +
> /* BM-type devices have a bug where bcdDevice gets set
> * to 0x200 when iSerialNumber is 0. */
> if (version < 0x500) {
> @@ -1598,6 +1611,7 @@ static ssize_t latency_timer_show(struct device *dev,
> {
> struct usb_serial_port *port = to_usb_serial_port(dev);
> struct ftdi_private *priv = usb_get_serial_port_data(port);
> +
> if (priv->flags & ASYNC_LOW_LATENCY)
> return sprintf(buf, "1\n");
> else
> @@ -1710,6 +1724,7 @@ static int ftdi_sio_probe(struct usb_serial *serial,
>
> if (quirk && quirk->probe) {
> int ret = quirk->probe(serial);
> +
> if (ret != 0)
> return ret;
> }
> @@ -1724,7 +1739,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port
> *port)
> struct ftdi_private *priv;
> struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
>
> -
> priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
> diff --git a/drivers/usb/serial/ftdi_sio_ids.h
> b/drivers/usb/serial/ftdi_sio_ids.h
> index f585eb7..c16d330 100644
> --- a/drivers/usb/serial/ftdi_sio_ids.h
> +++ b/drivers/usb/serial/ftdi_sio_ids.h
> @@ -897,7 +897,7 @@
> * Kondo Kagaku Co.Ltd.
> * http://www.kondo-robot.com/EN
> */
> -#define KONDO_VID 0x165c
> +#define KONDO_VID 0x165c
> #define KONDO_USB_SERIAL_PID 0x0002
>
> /*
> @@ -1284,7 +1284,7 @@
> /*
> * Accesio USB Data Acquisition products (http://www.accesio.com/)
> */
> -#define ACCESIO_COM4SM_PID 0xD578
> +#define ACCESIO_COM4SM_PID 0xD578
>
> /* www.sciencescope.co.uk educational dataloggers */
> #define FTDI_SCIENCESCOPE_LOGBOOKML_PID 0xFF18
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
