On Tue, 2014-08-19 at 14:06 -0500, Felipe Balbi wrote:
> On Fri, Aug 15, 2014 at 12:21:19PM +0300, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <iiva...@mm-sol.com>
> >
> > PHY drivers keep track of the current state of the hardware,
> > so don't change PHY settings under it.
> >
> > Signed-off-by: Ivan T. Ivanov <iiva...@mm-sol.com>
>
> looks correct to me from a PHY API perspective, so:
>
> Acked-by: Felipe Balbi <ba...@ti.com>
>
Thanks.
> However, it doesn't look like msm_phy_init() is equivalent to the lines
> removes. Care to comment ?
>
What I have to actually do is just add phy_init(). No need to remove
controller reinitialization. Tested and is working. Will post 2 new
patches shortly.
Regards,
Ivan
> > ---
> > drivers/usb/chipidea/ci_hdrc_msm.c | 9 ++-------
> > 1 file changed, 2 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c
> > b/drivers/usb/chipidea/ci_hdrc_msm.c
> > index d72b9d2..81de834 100644
> > --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> > +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> > @@ -20,13 +20,11 @@
> > static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
> > {
> > struct device *dev = ci->gadget.dev.parent;
> > - int val;
> >
> > switch (event) {
> > case CI_HDRC_CONTROLLER_RESET_EVENT:
> > dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
> > - writel(0, USB_AHBBURST);
> > - writel(0, USB_AHBMODE);
> > + usb_phy_init(ci->transceiver);
> > break;
> > case CI_HDRC_CONTROLLER_STOPPED_EVENT:
> > dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
> > @@ -34,10 +32,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci,
> > unsigned event)
> > * Put the transceiver in non-driving mode. Otherwise host
> > * may not detect soft-disconnection.
> > */
> > - val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
> > - val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
> > - val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
> > - usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
> > + usb_phy_notify_disconnect(ci->transceiver, USB_SPEED_UNKNOWN);
> > break;
> > default:
> > dev_dbg(dev, "unknown ci_hdrc event\n");
> > --
> > 1.8.3.2
> >
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
