For this preparation, a preliminary cleanup is done :
- convert the probing of pxa27x_udc to gpio_desc.
The conversion is partial because :
- the platform data still provides a gpio number, not a gpio desc
- the "invert" attribute is lost, hence a loss in the translation
The drawback with the gpio_desc conversion is that the "inverted" gpio
attribute is lost, as no gpiod_*() function exists to set the
"active_low" state of a gpio, and that attribute was at driver's
creation forecast to be set up by the driver and not the machine
specific code.
Signed-off-by: Robert Jarzmik <[email protected]>
---
drivers/usb/gadget/udc/pxa27x_udc.c | 47 ++++++++++++++++---------------------
drivers/usb/gadget/udc/pxa27x_udc.h | 2 ++
2 files changed, 22 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c
b/drivers/usb/gadget/udc/pxa27x_udc.c
index 597d39f..edad66c 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/prefetch.h>
#include <linux/byteorder/generic.h>
@@ -1507,17 +1508,12 @@ static struct usb_ep_ops pxa_ep_ops = {
*/
static void dplus_pullup(struct pxa_udc *udc, int on)
{
- if (on) {
- if (gpio_is_valid(udc->mach->gpio_pullup))
- gpio_set_value(udc->mach->gpio_pullup,
- !udc->mach->gpio_pullup_inverted);
- if (udc->mach->udc_command)
+ if (udc->gpiod) {
+ gpiod_set_value(udc->gpiod, on);
+ } else if (udc->mach && udc->mach->udc_command) {
+ if (on)
udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
- } else {
- if (gpio_is_valid(udc->mach->gpio_pullup))
- gpio_set_value(udc->mach->gpio_pullup,
- udc->mach->gpio_pullup_inverted);
- if (udc->mach->udc_command)
+ else
udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
}
udc->pullup_on = on;
@@ -1609,7 +1605,7 @@ static int pxa_udc_pullup(struct usb_gadget *_gadget, int
is_active)
{
struct pxa_udc *udc = to_gadget_udc(_gadget);
- if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
+ if (!udc->gpiod && !udc->mach->udc_command)
return -EOPNOTSUPP;
dplus_pullup(udc, is_active);
@@ -2415,7 +2411,13 @@ static int pxa_udc_probe(struct platform_device *pdev)
{
struct resource *regs;
struct pxa_udc *udc = &memory;
- int retval = 0, gpio;
+ struct pxa2xx_udc_mach_info *mach = dev_get_platdata(&pdev->dev);
+ int retval = 0;
+
+ if (mach) {
+ udc->gpiod = gpio_to_desc(mach->gpio_pullup);
+ udc->mach = mach;
+ }
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs)
@@ -2425,21 +2427,15 @@ static int pxa_udc_probe(struct platform_device *pdev)
return udc->irq;
udc->dev = &pdev->dev;
- udc->mach = dev_get_platdata(&pdev->dev);
udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
- gpio = udc->mach->gpio_pullup;
- if (gpio_is_valid(gpio)) {
- retval = gpio_request(gpio, "USB D+ pullup");
- if (retval == 0)
- gpio_direction_output(gpio,
- udc->mach->gpio_pullup_inverted);
- }
- if (retval) {
- dev_err(&pdev->dev, "Couldn't request gpio %d : %d\n",
- gpio, retval);
- return retval;
+ if (IS_ERR(udc->gpiod)) {
+ dev_err(&pdev->dev, "Couldn't find or request D+ gpio : %ld\n",
+ PTR_ERR(udc->gpiod));
+ return PTR_ERR(udc->gpiod);
}
+ if (udc->gpiod)
+ gpiod_direction_output(udc->gpiod, 0);
udc->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(udc->clk)) {
@@ -2501,14 +2497,11 @@ err_clk:
static int pxa_udc_remove(struct platform_device *_dev)
{
struct pxa_udc *udc = platform_get_drvdata(_dev);
- int gpio = udc->mach->gpio_pullup;
usb_del_gadget_udc(&udc->gadget);
usb_gadget_unregister_driver(udc->driver);
free_irq(udc->irq, udc);
pxa_cleanup_debugfs(udc);
- if (gpio_is_valid(gpio))
- gpio_free(gpio);
usb_put_phy(udc->transceiver);
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h
b/drivers/usb/gadget/udc/pxa27x_udc.h
index 28f2b53..f025693 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.h
+++ b/drivers/usb/gadget/udc/pxa27x_udc.h
@@ -421,6 +421,7 @@ struct udc_stats {
* @driver: bound gadget (zero, g_ether, g_mass_storage, ...)
* @dev: device
* @mach: machine info, used to activate specific GPIO
+ * @gpiod: gpio descriptor of gpio for D+ pullup (or NULL if none)
* @transceiver: external transceiver to handle vbus sense and D+ pullup
* @ep0state: control endpoint state machine state
* @stats: statistics on udc usage
@@ -447,6 +448,7 @@ struct pxa_udc {
struct usb_gadget_driver *driver;
struct device *dev;
struct pxa2xx_udc_mach_info *mach;
+ struct gpio_desc *gpiod;
struct usb_phy *transceiver;
enum ep0_state ep0state;
--
2.0.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
