On Fri, Oct 10, 2014 at 10:44:54AM +0200, Frans Klaver wrote:
> Add new IDs for the Xsens Awinda Station and Awinda Dongle.
> 
> Cc: <sta...@vger.kernel.org>
> Signed-off-by: Frans Klaver <frans.kla...@xsens.com>
> ---
>  drivers/usb/serial/ftdi_sio.c     | 2 ++
>  drivers/usb/serial/ftdi_sio_ids.h | 2 ++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
> index dc72b92..4969875 100644
> --- a/drivers/usb/serial/ftdi_sio.c
> +++ b/drivers/usb/serial/ftdi_sio.c
> @@ -663,6 +663,8 @@ static const struct usb_device_id id_table_combined[] = {
>       { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
>       { USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
>       { USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
> +     { USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
> +     { USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },

Could you keep the XSENS_VID entries sorted alphabetically here?

>       { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
>       { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
>       { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
> diff --git a/drivers/usb/serial/ftdi_sio_ids.h 
> b/drivers/usb/serial/ftdi_sio_ids.h
> index 5937b2d..be3fffe 100644
> --- a/drivers/usb/serial/ftdi_sio_ids.h
> +++ b/drivers/usb/serial/ftdi_sio_ids.h
> @@ -145,6 +145,8 @@
>  #define XSENS_VID            0x2639
>  #define XSENS_CONVERTER_PID  0xD00D  /* Xsens USB-serial converter */
>  #define XSENS_MTW_PID                0x0200  /* Xsens MTw */
> +#define XSENS_AWINDA_STATION_PID 0x0101
> +#define XSENS_AWINDA_DONGLE_PID 0x0102

And sorted by PID here (even though the two current entries are not, you
could reorder them as well).

I noticed that the below PIDs use the FTDI VID. Perhaps a comment or at
least a separating empty line would be appropriate.

>  #define XSENS_CONVERTER_0_PID        0xD388  /* Xsens USB converter */
>  #define XSENS_CONVERTER_1_PID        0xD389  /* Xsens Wireless Receiver */
>  #define XSENS_CONVERTER_2_PID        0xD38A

Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to