Hmm, Greg.
I seem to get this problem possibly more commonly at boot these days:
usb 1-6: new full-speed USB device number 2 using xhci_hcd
usb 1-6: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 1-6: hub failed to enable device, error -22
usb 1-6: new full-speed USB device number 3 using xhci_hcd
usb 1-6: device descriptor read/64, error -71
usb 1-6: hub failed to enable device, error -22
usb 1-6: new full-speed USB device number 4 using xhci_hcd
usb 1-6: Device not responding to setup address.
usb 1-6: Device not responding to setup address.
usb 1-6: device not accepting address 4, error -71
usb 1-6: new full-speed USB device number 5 using xhci_hcd
usb 1-6: Device not responding to setup address.
usb 1-6: Device not responding to setup address.
usb 1-6: device not accepting address 5, error -71
usb usb1-port6: unable to enumerate USB device
and my keyboard doesn't work. I then unplug and re-plug it, and get
usb 1-6: new full-speed USB device number 9 using xhci_hcd
usb 1-6: New USB device found, idVendor=2516, idProduct=0020
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: Quickfire Rapid i
usb 1-6: Manufacturer: CM Storm
Any ideas? Some setup delay that isn't long enough at boot time for a
slightly finicky device? It has happened before, but now I've gotten
it twice within a couple of days:
Nov 02 12:18:56 i7.lan kernel: usb 1-6: device descriptor read/64, error -71
Nov 28 16:54:06 i7.lan kernel: usb 1-6: device descriptor read/64, error -71
Nov 30 11:26:35 i7.lan kernel: usb 1-6: device descriptor read/64, error -71
(I've had this keyboard since mid-September, and looking at the logs
this machine has been rebooted 41 times since, with those three
failures..)
Linus
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
