On 01/06/2015 05:47 PM, Dinh Nguyen wrote:
> On 01/05/2015 01:16 PM, Paul Zimmerman wrote:
>> Adding Dinh to CC.
>>
>> Robert, Dinh, I would like to have your tested-bys for this series, please.
>>
>
> This patch series is producing this error on the SOCFPGA platform. I'll
> try to bisect to a specific patch.
>
> root@socfpga_cyclone5:~# [ 47.929743] dwc2 ffb40000.usb: new device is
> low-speed
> [ 63.873596] dwc2 ffb40000.usb: new device is low-speed
> [ 64.219220] dwc2 ffb40000.usb: new device is low-speed
> [ 64.421495] dwc2 ffb40000.usb: new device is low-speed
> [ 64.834505] dwc2 ffb40000.usb: new device is high-speed
> [ 69.899695] ------------[ cut here ]------------
> [ 69.904315] WARNING: CPU: 0 PID: 0 at drivers/usb/dwc2/gadget.c:1352
> s3c_hsotg_rx_data+0xc0/0xd4()
> [ 69.913230] Modules linked in: g_mass_storage usb_f_mass_storage
> libcomposite
> [ 69.920385] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
> 3.19.0-rc1-00090-g4864f14 #4
> [ 69.927917] Hardware name: Altera SOCFPGA
> [ 69.931936] [<c0014d24>] (unwind_backtrace) from [<c001173c>]
> (show_stack+0x10/0x14)
> [ 69.939654] [<c001173c>] (show_stack) from [<c0461c74>]
> (dump_stack+0x74/0x90)
> [ 69.946857] [<c0461c74>] (dump_stack) from [<c0021138>]
> (warn_slowpath_common+0x78/0xb4)
> [ 69.954916] [<c0021138>] (warn_slowpath_common) from [<c0021190>]
> (warn_slowpath_null+0x1c/0x24)
> [ 69.963669] [<c0021190>] (warn_slowpath_null) from [<c030278c>]
> (s3c_hsotg_rx_data+0xc0/0xd4)
> [ 69.972162] [<c030278c>] (s3c_hsotg_rx_data) from [<c0304ac0>]
> (s3c_hsotg_irq+0x454/0x520)
> [ 69.980394] [<c0304ac0>] (s3c_hsotg_irq) from [<c0058c3c>]
> (handle_irq_event_percpu+0x5c/0x1f4)
> [ 69.989056] [<c0058c3c>] (handle_irq_event_percpu) from [<c0058e18>]
> (handle_irq_event+0x44/0x64)
> [ 69.997892] [<c0058e18>] (handle_irq_event) from [<c005b8d8>]
> (handle_fasteoi_irq+0xa8/0x180)
> [ 70.006382] [<c005b8d8>] (handle_fasteoi_irq) from [<c005856c>]
> (generic_handle_irq+0x20/0x30)
> [ 70.014958] [<c005856c>] (generic_handle_irq) from [<c0058668>]
> (__handle_domain_irq+0x54/0xb4)
> [ 70.023619] [<c0058668>] (__handle_domain_irq) from [<c0008638>]
> (gic_handle_irq+0x20/0x5c)
> [ 70.031937] [<c0008638>] (gic_handle_irq) from [<c0012240>]
> (__irq_svc+0x40/0x54)
> [ 70.039384] Exception stack(0xc0635f60 to 0xc0635fa8)
> [ 70.044415] 5f60: 00000000 00000000 c0635fb0 c001cee0 c066cca0
> c063c498 c046908c c066c4b2
> [ 70.052556] 5f80: c066cca0 00000001 ef7fccc0 00000000 01000000
> c0635fa8 c000f0fc c000f100
> [ 70.060694] 5fa0: 600f0013 ffffffff
> [ 70.064174] [<c0012240>] (__irq_svc) from [<c000f100>]
> (arch_cpu_idle+0x30/0x3c)
> [ 70.071545] [<c000f100>] (arch_cpu_idle) from [<c0050364>]
> (cpu_startup_entry+0x138/0x224)
> [ 70.079783] [<c0050364>] (cpu_startup_entry) from [<c05ebbb0>]
> (start_kernel+0x304/0x35c)
> [ 70.087921] ---[ end trace 66b76f6dcbbda3bf ]---
> [ 79.911589] dwc2 ffb40000.usb: new device is low-speed
>
> Dinh
>
It looks like this patch is producing the above error.
usb: dwc2: gadget: manage ep0 state in software
Manage ep0 state in software to add handling of status OUT stage.
Just toggling hsotg->setup in s3c_hsotg_handle_outdone leaves it in
wrong state in 2-stage control transfers.
Moreover, don't call s3c_hsotg_handle_outdone both from SetupDone and
OutDone. Only use one of them, as for a setup packet we get both.
Signed-off-by: Mian Yousaf Kaukab <[email protected]>
Dinh
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
