From: Gregory Herrero <[email protected]> USB reset interrupt is no more used to reset the controller. Thus, reset the controller in pullup callback as described by Synopsys programming guide. Otherwise enumeration sometimes fails when usb configuration is switched without physical disconnection.
Signed-off-by: Gregory Herrero <[email protected]> --- drivers/usb/dwc2/gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 9f45b9f..6bf8660 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3157,6 +3157,7 @@ static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on) if (is_on) { clk_enable(hsotg->clk); hsotg->enabled = 1; + s3c_hsotg_core_init_disconnected(hsotg, false); s3c_hsotg_core_connect(hsotg); } else { s3c_hsotg_core_disconnect(hsotg); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
