On Mon, Jan 19, 2015 at 07:52:19PM +0200, Roger Quadros wrote: > The recommended name for USB-Host cable state is "USB-Host" and not > "USB-HOST" as per drivers/extcon/extcon-class.c extcon_cable_name. > > Change all instances of "USB-HOST" to "USB-Host". > > Signed-off-by: Roger Quadros <rog...@ti.com>
I checked that these are not documented and there are no DTS using
USB-HOST, so it's fine to change
Reviewed-by: Felipe Balbi <ba...@ti.com>
Acked-by: Felipe Balbi <ba...@ti.com>
> ---
> drivers/extcon/extcon-palmas.c | 18 +++++++++---------
> drivers/usb/dwc3/dwc3-omap.c | 6 +++---
> drivers/usb/phy/phy-omap-otg.c | 4 ++--
> drivers/usb/phy/phy-tahvo.c | 8 ++++----
> 4 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
> index 11c6757..6d002c3 100644
> --- a/drivers/extcon/extcon-palmas.c
> +++ b/drivers/extcon/extcon-palmas.c
> @@ -31,7 +31,7 @@
>
> static const char *palmas_extcon_cable[] = {
> [0] = "USB",
> - [1] = "USB-HOST",
> + [1] = "USB-Host",
> NULL,
> };
>
> @@ -93,26 +93,26 @@ static irqreturn_t palmas_id_irq_handler(int irq, void
> *_palmas_usb)
> PALMAS_USB_ID_INT_LATCH_CLR,
> PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
> palmas_usb->linkstat = PALMAS_USB_STATE_ID;
> - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
> - dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
> + extcon_set_cable_state(palmas_usb->edev, "USB-Host", true);
> + dev_info(palmas_usb->dev, "USB-Host cable is attached\n");
> } else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
> (id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
> palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
> PALMAS_USB_ID_INT_LATCH_CLR,
> PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
> palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
> - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
> - dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
> + extcon_set_cable_state(palmas_usb->edev, "USB-Host", false);
> + dev_info(palmas_usb->dev, "USB-Host cable is detached\n");
> } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
> (!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
> palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
> - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
> - dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
> + extcon_set_cable_state(palmas_usb->edev, "USB-Host", false);
> + dev_info(palmas_usb->dev, "USB-Host cable is detached\n");
> } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
> (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
> palmas_usb->linkstat = PALMAS_USB_STATE_ID;
> - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
> - dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
> + extcon_set_cable_state(palmas_usb->edev, "USB-Host", true);
> + dev_info(palmas_usb->dev, " USB-Host cable is attached\n");
> }
>
> return IRQ_HANDLED;
> diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
> index 172d64e..6713ad9 100644
> --- a/drivers/usb/dwc3/dwc3-omap.c
> +++ b/drivers/usb/dwc3/dwc3-omap.c
> @@ -445,14 +445,14 @@ static int dwc3_omap_extcon_register(struct dwc3_omap
> *omap)
>
> omap->id_nb.notifier_call = dwc3_omap_id_notifier;
> ret = extcon_register_interest(&omap->extcon_id_dev,
> - edev->name, "USB-HOST",
> + edev->name, "USB-Host",
> &omap->id_nb);
> if (ret < 0)
> - dev_vdbg(omap->dev, "failed to register notifier for
> USB-HOST\n");
> + dev_vdbg(omap->dev, "failed to register notifier for
> USB-Host\n");
>
> if (extcon_get_cable_state(edev, "USB") == true)
> dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
> - if (extcon_get_cable_state(edev, "USB-HOST") == true)
> + if (extcon_get_cable_state(edev, "USB-Host") == true)
> dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
> }
>
> diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
> index 56ee760..53cba3f 100644
> --- a/drivers/usb/phy/phy-omap-otg.c
> +++ b/drivers/usb/phy/phy-omap-otg.c
> @@ -119,7 +119,7 @@ static int omap_otg_probe(struct platform_device *pdev)
> otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier;
>
> ret = extcon_register_interest(&otg_dev->id_dev, config->extcon,
> - "USB-HOST", &otg_dev->id_nb);
> + "USB-Host", &otg_dev->id_nb);
> if (ret)
> return ret;
>
> @@ -130,7 +130,7 @@ static int omap_otg_probe(struct platform_device *pdev)
> return ret;
> }
>
> - otg_dev->id = extcon_get_cable_state(extcon, "USB-HOST");
> + otg_dev->id = extcon_get_cable_state(extcon, "USB-Host");
> otg_dev->vbus = extcon_get_cable_state(extcon, "USB");
> omap_otg_set_mode(otg_dev);
>
> diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
> index 845f658..56d3704 100644
> --- a/drivers/usb/phy/phy-tahvo.c
> +++ b/drivers/usb/phy/phy-tahvo.c
> @@ -61,7 +61,7 @@ struct tahvo_usb {
> };
>
> static const char *tahvo_cable[] = {
> - "USB-HOST",
> + "USB-Host",
> "USB",
> NULL,
> };
> @@ -129,7 +129,7 @@ static void tahvo_usb_become_host(struct tahvo_usb *tu)
> {
> struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
>
> - extcon_set_cable_state(&tu->extcon, "USB-HOST", true);
> + extcon_set_cable_state(&tu->extcon, "USB-Host", true);
>
> /* Power up the transceiver in USB host mode */
> retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
> @@ -148,7 +148,7 @@ static void tahvo_usb_become_peripheral(struct tahvo_usb
> *tu)
> {
> struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
>
> - extcon_set_cable_state(&tu->extcon, "USB-HOST", false);
> + extcon_set_cable_state(&tu->extcon, "USB-Host", false);
>
> /* Power up transceiver and set it in USB peripheral mode */
> retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
> @@ -376,7 +376,7 @@ static int tahvo_usb_probe(struct platform_device *pdev)
> }
>
> /* Set the initial cable state. */
> - extcon_set_cable_state(&tu->extcon, "USB-HOST",
> + extcon_set_cable_state(&tu->extcon, "USB-Host",
> tu->tahvo_mode == TAHVO_MODE_HOST);
> extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state);
>
> --
> 2.1.0
>
--
balbi
signature.asc
Description: Digital signature
