On Fri, Jan 30, 2015 at 02:13:40PM +0800, Peter Hung wrote:
> This patch implement relative MCR/MSR function, such like
> tiocmget()/tiocmset()/dtr_rts().
>
> The update_mctrl() replace set_control_lines() to do MCR control
> so we clean-up the set_control_lines() function.
>
> Signed-off-by: Peter Hung <hpeter+linux_ker...@gmail.com>
> ---
> drivers/usb/serial/f81232.c | 105
> ++++++++++++++++++++++++++++++++++----------
> 1 file changed, 83 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
> index 248f40d..0ed7e36 100644
> --- a/drivers/usb/serial/f81232.c
> +++ b/drivers/usb/serial/f81232.c
> @@ -38,11 +38,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
> #define UART_STATE_TRANSIENT_MASK 0x74
> #define UART_DCD 0x01
> #define UART_DSR 0x02
> -#define UART_BREAK_ERROR 0x04
> #define UART_RING 0x08
> -#define UART_FRAME_ERROR 0x10
> -#define UART_PARITY_ERROR 0x20
> -#define UART_OVERRUN_ERROR 0x40
> #define UART_CTS 0x80
>
> #define REGISTER_REQUEST 0xA0
> @@ -55,6 +51,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
> #define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
> #define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
> #define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS)
> +#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
> #define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
> struct f81232_private {
> spinlock_t lock;
> @@ -165,6 +162,62 @@ static void f81232_read_msr(struct f81232_private *priv)
>
> dev_dbg(&dev->dev, "%s: %x\n", __func__, priv->line_status);
> }
> +
> +static inline int update_mctrl(struct f81232_private *port_priv,
> + unsigned int set, unsigned int clear)
Rename this on f81232_set_mctrl or similar, and pass the usb-serial port
instead of port-data.
Drop the inline (from all you functions).
> +{
> + struct usb_device *dev = port_priv->port->serial->dev;
> + u8 urb_value;
> + int status;
> + unsigned long flags;
> +
> + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
> + dev_dbg(&dev->dev, "%s fail - DTR|RTS %d\n",
> + __func__, __LINE__);
Just skip the dev_dbg.
> + return 0; /* no change */
> + }
> +
> + clear &= ~set; /* 'set' takes precedence over 'clear' */
> + urb_value = 8 | port_priv->line_control;
Use the UART_MCR_OUT2 define if needed (and comment on why).
> +
> + if (clear & TIOCM_DTR) {
> + urb_value &= ~UART_MCR_DTR;
> + dev_dbg(&dev->dev, "clear DTR\n");
> + }
> +
> + if (clear & TIOCM_RTS) {
> + urb_value &= ~UART_MCR_RTS;
> + dev_dbg(&dev->dev, "clear RTS\n");
> + }
> +
> + if (set & TIOCM_DTR) {
> + urb_value |= UART_MCR_DTR;
> + dev_dbg(&dev->dev, "set DTR\n");
> + }
> +
> + if (set & TIOCM_RTS) {
> + urb_value |= UART_MCR_RTS;
> + dev_dbg(&dev->dev, "set RTS\n");
> + }
You don't need all those dev_dbg, the one below should suffice.
> +
> + dev_dbg(&dev->dev, "%s n:%x o:%x\n", __func__, urb_value,
> + port_priv->line_control);
Use %02x, and it doesn't hurt spelling out "new" and "old".
> +
> + status = f81232_set_register(dev, MODEM_CONTROL_REGISTER, urb_value);
> +
> + if (status < 0) {
> + dev_dbg(&dev->dev, "%s read MSR status < 0\n", __func__);
dev_err, and the error message is incorrect (you're updating MCR).
> + } else {
> + spin_lock_irqsave(&port_priv->lock, flags);
> + port_priv->line_control = urb_value;
> + spin_unlock_irqrestore(&port_priv->lock, flags);
> + }
> +
> + f81232_read_msr(port_priv);
Won't you get an interrupt if MSR changes?
> +
> + return status;
> +}
> +
> static void f81232_update_line_status(struct usb_serial_port *port,
> unsigned char *data,
> unsigned int actual_length)
> @@ -261,12 +314,6 @@ static void f81232_process_read_urb(struct urb *urb)
>
> }
>
> -static int set_control_lines(struct usb_device *dev, u8 value)
> -{
> - /* FIXME - Stubbed out for now */
> - return 0;
> -}
> -
> static void f81232_break_ctl(struct tty_struct *tty, int break_state)
> {
> /* FIXME - Stubbed out for now */
> @@ -383,14 +430,35 @@ static void f81232_set_termios(struct tty_struct *tty,
>
> static int f81232_tiocmget(struct tty_struct *tty)
> {
> - /* FIXME - Stubbed out for now */
> - return 0;
> + int r;
> + struct usb_serial_port *port = tty->driver_data;
> + struct f81232_private *port_priv = usb_get_serial_port_data(port);
> + unsigned long flags;
> + u8 mcr, msr;
> +
> + spin_lock_irqsave(&port_priv->lock, flags);
> + mcr = port_priv->line_control;
> + msr = port_priv->line_status;
> + spin_unlock_irqrestore(&port_priv->lock, flags);
> +
> + r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
> + (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
> + (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
> + (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
> + (msr & UART_MSR_RI ? TIOCM_RI : 0) |
> + (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
> +
> + return r;
> }
>
> static int f81232_tiocmset(struct tty_struct *tty,
> unsigned int set, unsigned int clear)
> {
> - /* FIXME - Stubbed out for now */
> + struct usb_serial_port *port = tty->driver_data;
> + struct f81232_private *port_priv =
> + usb_get_serial_port_data(port);
> +
> + update_mctrl(port_priv, set, clear);
You should return any errors here (after passing it to
usb_translate_error()).
> return 0;
> }
>
> @@ -427,18 +495,11 @@ static void f81232_close(struct usb_serial_port *port)
> static void f81232_dtr_rts(struct usb_serial_port *port, int on)
> {
> struct f81232_private *priv = usb_get_serial_port_data(port);
> - unsigned long flags;
> - u8 control;
>
> - spin_lock_irqsave(&priv->lock, flags);
> - /* Change DTR and RTS */
> if (on)
> - priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
> + update_mctrl(priv, TIOCM_DTR | TIOCM_RTS, 0);
> else
> - priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
> - control = priv->line_control;
> - spin_unlock_irqrestore(&priv->lock, flags);
> - set_control_lines(port->serial->dev, control);
> + update_mctrl(priv, 0, TIOCM_DTR | TIOCM_RTS);
> }
>
> static int f81232_carrier_raised(struct usb_serial_port *port)
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
