From: Tony Lindgren <[email protected]> We still have a combination of legacy phys and generic phys in use so we need to support both types of phy for musb_dsps.c.
Cc: Brian Hutchinson <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> --- drivers/usb/musb/musb_dsps.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 5872accb0fd3..a900c9877195 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -457,12 +457,27 @@ static int dsps_musb_init(struct musb *musb) if (IS_ERR(musb->xceiv)) return PTR_ERR(musb->xceiv); + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); + /* Returns zero if e.g. not clocked */ rev = dsps_readl(reg_base, wrp->revision); if (!rev) return -ENODEV; usb_phy_init(musb->xceiv); + if (IS_ERR(musb->phy)) { + musb->phy = NULL; + } else { + ret = phy_init(musb->phy); + if (ret < 0) + return ret; + ret = phy_power_on(musb->phy); + if (ret) { + phy_exit(musb->phy); + return ret; + } + } + setup_timer(&glue->timer, otg_timer, (unsigned long) musb); /* Reset the musb */ @@ -502,6 +517,8 @@ static int dsps_musb_exit(struct musb *musb) del_timer_sync(&glue->timer); usb_phy_shutdown(musb->xceiv); + phy_power_off(musb->phy); + phy_exit(musb->phy); debugfs_remove_recursive(glue->dbgfs_root); return 0; @@ -610,7 +627,7 @@ static int dsps_musb_reset(struct musb *musb) struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; - int session_restart = 0; + int session_restart = 0, error; if (glue->sw_babble_enabled) session_restart = sw_babble_control(musb); @@ -624,8 +641,14 @@ static int dsps_musb_reset(struct musb *musb) dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset)); usleep_range(100, 200); usb_phy_shutdown(musb->xceiv); + error = phy_power_off(musb->phy); + if (error) + dev_err(dev, "phy shutdown failed: %i\n", error); usleep_range(100, 200); usb_phy_init(musb->xceiv); + error = phy_power_on(musb->phy); + if (error) + dev_err(dev, "phy powerup failed: %i\n", error); session_restart = 1; } -- 2.3.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
