> > > > > @@ -579,8 +579,15 @@ int ci_otg_fsm_work(struct ci_hdrc *ci)
> > > > > * a_idle to a_wait_vrise when power up
> > > > > */
> > > > > if ((ci->fsm.id) || (ci->id_event) ||
> > > > > - (ci->fsm.power_up))
> > > > > + (ci->fsm.power_up)) {
> > > > > ci_otg_queue_work(ci);
> > > > > + } else {
> > > > > + /* Enable data pulse irq */
> > > > > + hw_write(ci, OP_PORTSC,
> PORTSC_W1C_BITS |
> > > > > +
> PORTSC_PP, 0);
> > > > > + hw_write_otgsc(ci, OTGSC_DPIS,
> OTGSC_DPIS);
> > > > > + hw_write_otgsc(ci, OTGSC_DPIE,
> OTGSC_DPIE);
> > > > > + }
> > > >
> > > > Can we enable data pulse enable at initialization routine?
> > >
> > > This irq should be enabled only for A-device when there is no
> > > session (host role, no vbus, so in A_IDLE state), and disable it after
> > > receive
> its irq(SRP).
> > >
> >
> > But from the code, I don't know the state is at A_IDLE, mind to change?
> >
>
> It's already under condition of A_IDLE as below:
>
> if (ci->fsm.otg->state == OTG_STATE_A_IDLE) {
> ... ...
> if () {
> ... ...
> } else {
> /* Enable data pulse irq */
> ...
> }
> }
>
> That's a change to avoid to do it in timer out(VFALL) handler, so put it here
> (after otg fsm transit to A_IDLE and will no further state transitions).
>
Oh, I have no seen it in patch file. Send your v2, then, I can have a test.
Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
