NB: This is an updated version of
https://bugzilla.kernel.org/show_bug.cgi?id=97131. I'm reposting here by the
request of that bug's assignee.
In this update I've added the output of some more diagnostic commands (at the
end of the post). The list of diagnostic commands run is now this:
$ cat /proc/version
$ /usr/lib/linux-kbuild-3.2/scripts/ver_linux
$ cat /proc/cpuinfo
$ cat /proc/modules
$ cat /proc/ioports
$ cat /proc/iomem
$ lspci -vvv
$ lspci -nn
$ cat /proc/scsi/scsi
$ lsusb -v
$ dmesg
$ cat /etc/rc.local
$ cat /proc/interrupts
$ dpkg -l | grep "$(uname -r)"
================================================================================
DESCRIPTION
===========
My new computer (Dell Precision T1700) works fine until the system
goes to sleep for the first time after booting. After waking, the
cursor on the screen lags so much behind the physical motion of the
mouse that the latter is basically unusable. This mouse malfunction
persists until the system is rebooted.
The only new log messages I see when I bring the system back from its
first post-boot sleep is this (both in /var/log/kern.log and
/var/log/syslog, and part of it also in /var/log/messages):
Apr 22 09:21:00 capitan kernel: [ 67.832836] irq 16: nobody
cared (try booting with the "irqpoll" option)
Apr 22 09:21:00 capitan kernel: [ 67.832848] Pid: 0, comm:
swapper/0 Not tainted 3.2.0-4-amd64 #1 Debian 3.2.65-1+deb7u2
Apr 22 09:21:00 capitan kernel: [ 67.832853] Call Trace:
Apr 22 09:21:00 capitan kernel: [ 67.832856] <IRQ>
[<ffffffff81092ddd>] ? __report_bad_irq+0x2c/0xb5
Apr 22 09:21:00 capitan kernel: [ 67.832878]
[<ffffffff810931e2>] ? note_interrupt+0x1b8/0x23a
Apr 22 09:21:00 capitan kernel: [ 67.832886]
[<ffffffff81091554>] ? handle_irq_event_percpu+0x15f/0x17d
Apr 22 09:21:00 capitan kernel: [ 67.832893]
[<ffffffff810915a6>] ? handle_irq_event+0x34/0x52
Apr 22 09:21:00 capitan kernel: [ 67.832903]
[<ffffffff8106c305>] ? arch_local_irq_save+0x11/0x17
Apr 22 09:21:00 capitan kernel: [ 67.832911]
[<ffffffff81093959>] ? handle_fasteoi_irq+0x7c/0xaf
Apr 22 09:21:00 capitan kernel: [ 67.832921]
[<ffffffff8100fa51>] ? handle_irq+0x1d/0x21
Apr 22 09:21:00 capitan kernel: [ 67.832929]
[<ffffffff8100f62a>] ? do_IRQ+0x42/0x98
Apr 22 09:21:00 capitan kernel: [ 67.832939]
[<ffffffff813511ae>] ? common_interrupt+0x6e/0x6e
Apr 22 09:21:00 capitan kernel: [ 67.832943] <EOI>
[<ffffffff81024404>] ? lapic_next_event+0xe/0x13
Apr 22 09:21:00 capitan kernel: [ 67.832977]
[<ffffffffa01dc35b>] ? arch_local_irq_enable+0x7/0x8 [processor]
Apr 22 09:21:00 capitan kernel: [ 67.832991]
[<ffffffffa01dd0b3>] ? acpi_idle_enter_c1+0x8d/0xb3 [processor]
Apr 22 09:21:00 capitan kernel: [ 67.833002]
[<ffffffff8127180d>] ? cpuidle_idle_call+0xec/0x179
Apr 22 09:21:00 capitan kernel: [ 67.833010]
[<ffffffff8100d242>] ? cpu_idle+0xa5/0xf2
Apr 22 09:21:00 capitan kernel: [ 67.833020]
[<ffffffff816aab3b>] ? start_kernel+0x3bd/0x3c8
Apr 22 09:21:00 capitan kernel: [ 67.833029]
[<ffffffff816aa140>] ? early_idt_handlers+0x140/0x140
Apr 22 09:21:00 capitan kernel: [ 67.833037]
[<ffffffff816aa3c4>] ? x86_64_start_kernel+0x104/0x111
Apr 22 09:21:00 capitan kernel: [ 67.833041] handlers:
Apr 22 09:21:00 capitan kernel: [ 67.833059]
[<ffffffffa00a9216>] usb_hcd_irq
Apr 22 09:21:00 capitan kernel: [ 67.833067]
[<ffffffffa0295cbd>] azx_interrupt
Apr 22 09:21:00 capitan kernel: [ 67.833072] Disabling IRQ #16
I figure that it is the disabling of IRQ #16 (last line) that is
responsible for the subsequent malfunctioning of the mouse.
The driver associated with this interrupt is
# grep '^ 16:' /proc/interrupts
16: 1211 0 0 0
IR-IO-APIC-fasteoi ehci_hcd:usb1
(When I first looked into this problem, the IRQ 16 line was actually
like this:
# grep '^ 16:' /proc/interrupts
16: 1210 0 0 0
IR-IO-APIC-fasteoi ehci_hcd:usb1, snd_hda_intel
Since snd_hda_intel was being loaded twice at boot time (e.g. it
showed up also in the line for IRQ 45), I tried to fix the problem
with the mouse by disabling this instance of snd_hda_intel. For
details, see the content of my /etc/rc.local file further below. As
it turned out, even though snd_hda_intel no longer appears in the IRQ
16 line, the unhandled IRQ 16 error keeps happening, and the problem
with the mouse persists.)
================================================================================
A few more observations, for what they're worth:
1. I don't see this problem at all if I reboot the machine into
Windows 7 (mouse works the same before and after sleep).
2. the mouse does not seem to be the source of the problem, because the
both the unhandled interrupt and the subsequent problems with the
mouse occur even if I:
1. disconnect the mouse;
2. reboot the machine (into Debian);
3. put the system to sleep (with `sleep 0.1; xset dpms force off` );
4. wake the system;
5. connect the mouse
3. the problem also occurs if, instead of putting the system to sleep
(as described in step (2.3) above), I simply turn off the monitor.
================================================================================
I'm looking for some work-arounds (other than disabling
sleep/power-saving altogether) to avoid having to
reboot after every time the system goes to sleep.
================================================================================
DIAGNOSTICS
===========
Below are the outputs of the following diagnostic commands:
$ cat /proc/version
$ /usr/lib/linux-kbuild-3.2/scripts/ver_linux
$ cat /proc/cpuinfo
$ cat /proc/modules
$ cat /proc/ioports
$ cat /proc/iomem
$ lspci -vvv
$ lspci -nn
$ cat /proc/scsi/scsi
$ lsusb -v
$ dmesg
$ cat /etc/rc.local
$ cat /proc/interrupts
$ dpkg -l | grep "$(uname -r)"
Search for the string "$$$" to skip to the output of the next command. The
command ran is in the first non-empty line of each section (preceded by
" $ "). So, to skip to the section for for command `foo bar`, say, it should
be enough to search for the string "foo bar".
Before running these commands, I ran
$ aptitude update
$ aptitude upgrade
and rebooted the system. I ran the diagnostic commands right after the reboot,
with the exception of the last one (`dpkg -l` ...).
================================================================================
Thu Apr 23 07:24:46 EDT 2015
$$$ ============================================================================
$ cat /proc/version
Linux version 3.2.0-4-amd64 ([email protected]) (gcc
version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u2
$$$ ============================================================================
$ /usr/lib/linux-kbuild-3.2/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux capitan 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u2 x86_64 GNU/Linux
Gnu C 4.7
Gnu make 3.81
binutils 2.22
util-linux 2.20.1
mount support
module-init-tools 9
e2fsprogs 1.42.5
pcmciautils 018
PPP 2.4.5
Linux C Library 2.13
Dynamic linker (ldd) 2.13
Procps 3.3.3
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 8.13
wireless-tools 30
Modules Loaded bnep parport_pc ppdev lp parport rfcomm
bluetooth rfkill binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss
fscache lockd sunrpc fuse loop snd_hda_codec_realtek coretemp
crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 aes_generic
cryptd evdev dcdbas snd_hda_intel snd_hda_codec snd_hwdep snd_pcm
snd_page_alloc snd_seq snd_seq_device snd_timer wmi acpi_cpufreq mperf
iTCO_wdt iTCO_vendor_support pcspkr psmouse i2c_i801 video i2c_core
snd serio_raw button processor soundcore ext4 crc16 jbd2 mbcache
usbhid hid usb_storage sg sr_mod sd_mod cdrom crc_t10dif xhci_hcd
thermal thermal_sys ahci libahci e1000e ehci_hcd libata scsi_mod
usbcore usb_common
$$$ ============================================================================
$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 60
model name : Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz
stepping : 3
microcode : 0x1c
cpu MHz : 3501.000
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts
rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64
monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1
sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c
rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow
vnmi flexpriority ept vpid fsgsbase smep erms
bogomips : 6983.95
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 60
model name : Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz
stepping : 3
microcode : 0x1c
cpu MHz : 2700.000
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts
rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64
monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1
sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c
rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow
vnmi flexpriority ept vpid fsgsbase smep erms
bogomips : 6983.76
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 60
model name : Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz
stepping : 3
microcode : 0x1c
cpu MHz : 1800.000
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts
rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64
monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1
sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c
rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow
vnmi flexpriority ept vpid fsgsbase smep erms
bogomips : 6983.85
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 60
model name : Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz
stepping : 3
microcode : 0x1c
cpu MHz : 1400.000
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts
rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64
monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1
sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c
rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow
vnmi flexpriority ept vpid fsgsbase smep erms
bogomips : 6983.76
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
$$$ ============================================================================
$ cat /proc/modules
bnep 17567 2 - Live 0xffffffffa0440000
parport_pc 22364 0 - Live 0xffffffffa03db000
ppdev 12763 0 - Live 0xffffffffa0364000
lp 17149 0 - Live 0xffffffffa03d5000
parport 31858 3 parport_pc,ppdev,lp, Live 0xffffffffa035b000
rfcomm 33700 0 - Live 0xffffffffa03cb000
bluetooth 119455 10 bnep,rfcomm, Live 0xffffffffa041b000
rfkill 19012 2 bluetooth, Live 0xffffffffa02d5000
binfmt_misc 12957 1 - Live 0xffffffffa0276000
uinput 17440 1 - Live 0xffffffffa026a000
nfsd 216181 2 - Live 0xffffffffa03e5000
nfs 308353 0 - Live 0xffffffffa037e000
nfs_acl 12511 2 nfsd,nfs, Live 0xffffffffa010e000
auth_rpcgss 37143 2 nfsd,nfs, Live 0xffffffffa01f3000
fscache 36739 1 nfs, Live 0xffffffffa02ba000
lockd 67306 2 nfsd,nfs, Live 0xffffffffa036c000
sunrpc 173730 6 nfsd,nfs,nfs_acl,auth_rpcgss,lockd, Live 0xffffffffa032a000
fuse 62012 5 - Live 0xffffffffa0319000
loop 22641 0 - Live 0xffffffffa01e7000
snd_hda_codec_realtek 188851 1 - Live 0xffffffffa02e9000
coretemp 12898 0 - Live 0xffffffffa01ee000
crc32c_intel 12747 0 - Live 0xffffffffa01dc000
ghash_clmulni_intel 13130 0 - Live 0xffffffffa01cd000
aesni_intel 50667 0 - Live 0xffffffffa02db000
aes_x86_64 16843 1 aesni_intel, Live 0xffffffffa0142000
aes_generic 33026 2 aesni_intel,aes_x86_64, Live 0xffffffffa0201000
cryptd 14517 2 ghash_clmulni_intel,aesni_intel, Live 0xffffffffa01e2000
evdev 17562 10 - Live 0xffffffffa01d3000
dcdbas 13307 0 - Live 0xffffffffa028d000
snd_hda_intel 26259 4 - Live 0xffffffffa02c7000
snd_hda_codec 78031 2 snd_hda_codec_realtek,snd_hda_intel, Live
0xffffffffa02a5000
snd_hwdep 13186 1 snd_hda_codec, Live 0xffffffffa0288000
snd_pcm 68083 4 snd_hda_intel,snd_hda_codec, Live 0xffffffffa0293000
snd_page_alloc 13003 2 snd_hda_intel,snd_pcm, Live 0xffffffffa0271000
snd_seq 45126 0 - Live 0xffffffffa027b000
snd_seq_device 13176 1 snd_seq, Live 0xffffffffa021e000
snd_timer 22917 2 snd_pcm,snd_seq, Live 0xffffffffa0263000
wmi 13243 0 - Live 0xffffffffa025a000
acpi_cpufreq 12935 0 - Live 0xffffffffa0219000
mperf 12453 1 acpi_cpufreq, Live 0xffffffffa0255000
iTCO_wdt 17081 0 - Live 0xffffffffa024f000
iTCO_vendor_support 12704 1 iTCO_wdt, Live 0xffffffffa024a000
pcspkr 12579 0 - Live 0xffffffffa022f000
psmouse 69265 0 - Live 0xffffffffa0234000
i2c_i801 16870 0 - Live 0xffffffffa0223000
video 17683 0 - Live 0xffffffffa0229000
i2c_core 23876 1 i2c_i801, Live 0xffffffffa014a000
snd 52893 14
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_seq_device,snd_timer,
Live 0xffffffffa020b000
serio_raw 12931 0 - Live 0xffffffffa00fd000
button 12937 0 - Live 0xffffffffa00e5000
processor 28149 5 acpi_cpufreq, Live 0xffffffffa00f5000
soundcore 13065 1 snd, Live 0xffffffffa00c7000
ext4 350804 1 - Live 0xffffffffa0176000
crc16 12343 2 bluetooth,ext4, Live 0xffffffffa002d000
jbd2 62115 1 ext4, Live 0xffffffffa0165000
mbcache 13114 1 ext4, Live 0xffffffffa00ac000
usbhid 36418 0 - Live 0xffffffffa00eb000
hid 81372 1 usbhid, Live 0xffffffffa00d0000
usb_storage 43870 0 - Live 0xffffffffa00bb000
sg 25874 0 - Live 0xffffffffa006c000
sr_mod 21899 0 - Live 0xffffffffa00b1000
sd_mod 36136 6 - Live 0xffffffffa00a2000
cdrom 35401 1 sr_mod, Live 0xffffffffa0062000
crc_t10dif 12348 1 sd_mod, Live 0xffffffffa0028000
xhci_hcd 73352 0 - Live 0xffffffffa0152000
thermal 17383 0 - Live 0xffffffffa013c000
thermal_sys 18040 3 video,processor,thermal, Live 0xffffffffa0033000
ahci 24997 4 - Live 0xffffffffa009a000
libahci 22941 1 ahci, Live 0xffffffffa0135000
e1000e 133833 0 - Live 0xffffffffa0113000
ehci_hcd 40249 0 - Live 0xffffffffa0103000
libata 140630 2 ahci,libahci, Live 0xffffffffa0076000
scsi_mod 162321 5 usb_storage,sg,sr_mod,sd_mod,libata, Live
0xffffffffa0039000
usbcore 128741 5 usbhid,usb_storage,xhci_hcd,ehci_hcd, Live
0xffffffffa0007000
usb_common 12354 1 usbcore, Live 0xffffffffa0000000
$$$ ============================================================================
$ cat /proc/ioports
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00b2-00b2 : APEI ERST
00c0-00df : dma2
00f0-00ff : fpu
03c0-03df : vga+
03f8-03ff : serial
04d0-04d1 : pnp 00:0a
0680-069f : pnp 00:06
0a00-0a0f : pnp 00:09
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
164e-164f : pnp 00:06
1800-18fe : pnp 00:06
1800-1803 : ACPI PM1a_EVT_BLK
1804-1805 : ACPI PM1a_CNT_BLK
1808-180b : ACPI PM_TMR
1810-1815 : ACPI CPU throttle
1820-182f : ACPI GPE0_BLK
1830-1833 : iTCO_wdt
1850-1850 : ACPI PM2_CNT_BLK
1854-1857 : pnp 00:08
1860-187f : iTCO_wdt
1c00-1cfe : pnp 00:06
1d00-1dfe : pnp 00:06
1e00-1efe : pnp 00:06
1f00-1ffe : pnp 00:06
2000-2fff : PCI Bus 0000:02
f000-f03f : 0000:00:02.0
f040-f05f : 0000:00:1f.3
f060-f07f : 0000:00:1f.2
f060-f07f : ahci
f080-f09f : 0000:00:19.0
f0a0-f0a3 : 0000:00:1f.2
f0a0-f0a3 : ahci
f0b0-f0b7 : 0000:00:1f.2
f0b0-f0b7 : ahci
f0c0-f0c3 : 0000:00:1f.2
f0c0-f0c3 : ahci
f0d0-f0d7 : 0000:00:1f.2
f0d0-f0d7 : ahci
ffff-ffff : pnp 00:06
ffff-ffff : pnp 00:06
ffff-ffff : pnp 00:06
$$$ ============================================================================
$ cat /proc/iomem
00000000-0000ffff : reserved
00010000-000917ff : System RAM
00091800-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000cfdff : Video ROM
000d0000-000d9dff : Adapter ROM
000da000-000dafff : Adapter ROM
000db000-000dbfff : Adapter ROM
000dc000-000dffff : PCI Bus 0000:00
000e0000-000fffff : reserved
000e0000-000e3fff : PCI Bus 0000:00
000e4000-000e7fff : PCI Bus 0000:00
000f0000-000fffff : System ROM
00100000-d2291fff : System RAM
01000000-0135a8a5 : Kernel code
0135a8a6-01694eff : Kernel data
01729000-01807fff : Kernel bss
d2292000-d2298fff : ACPI Non-volatile Storage
d2299000-d26cafff : System RAM
d26cb000-d2b5bfff : reserved
d2b5c000-d7edafff : System RAM
d7edb000-d7ffffff : reserved
d8000000-d875ffff : System RAM
d8760000-d87fffff : reserved
d8800000-d8fadfff : System RAM
d8fae000-d8ffffff : ACPI Tables
d9000000-da71cfff : System RAM
da71d000-da7fffff : ACPI Non-volatile Storage
da800000-dbb05fff : System RAM
dbb06000-dbffffff : reserved
dbc73018-dbc7303e : APEI ERST
dbc7303f-dbc7503e : APEI ERST
dd000000-df1fffff : reserved
df200000-feafffff : PCI Bus 0000:00
df200000-df3fffff : PCI Bus 0000:02
df400000-df5fffff : PCI Bus 0000:02
e0000000-efffffff : 0000:00:02.0
f7800000-f7bfffff : 0000:00:02.0
f7c00000-f7c1ffff : 0000:00:19.0
f7c00000-f7c1ffff : e1000e
f7c20000-f7c2ffff : 0000:00:14.0
f7c20000-f7c2ffff : xhci_hcd
f7c30000-f7c33fff : 0000:00:1b.0
f7c30000-f7c33fff : ICH HD audio
f7c39000-f7c390ff : 0000:00:1f.3
f7c3a000-f7c3a7ff : 0000:00:1f.2
f7c3a000-f7c3a7ff : ahci
f7c3b000-f7c3b3ff : 0000:00:1d.0
f7c3b000-f7c3b3ff : ehci_hcd
f7c3c000-f7c3c3ff : 0000:00:1a.0
f7c3c000-f7c3c3ff : ehci_hcd
f7c3d000-f7c3dfff : 0000:00:19.0
f7c3d000-f7c3dfff : e1000e
f7c40000-f7c4000f : 0000:00:16.0
f7fd0000-f7fdffff : pnp 00:0c
f7fee000-f7feefff : pnp 00:0c
f8000000-fbffffff : PCI MMCONFIG 0000 [bus 00-3f]
f8000000-fbffffff : reserved
f8000000-fbffffff : pnp 00:0c
fec00000-fec00fff : reserved
fec00000-fec003ff : IOAPIC 0
fed00000-fed03fff : reserved
fed00000-fed003ff : HPET 0
fed10000-fed17fff : pnp 00:0c
fed18000-fed18fff : pnp 00:0c
fed19000-fed19fff : pnp 00:0c
fed1c000-fed1ffff : reserved
fed1c000-fed1ffff : pnp 00:0c
fed20000-fed3ffff : pnp 00:0c
fed40000-fed44fff : pnp 00:01
fed45000-fed8ffff : pnp 00:0c
fed90000-fed93fff : pnp 00:0c
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
ff000000-ffffffff : reserved
ff000000-ffffffff : pnp 00:0c
100000000-81edfffff : System RAM
81ee00000-81fffffff : RAM buffer
$$$ ============================================================================
$ lspci -vvv
00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
Subsystem: Dell Device 05a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:02.0 VGA compatible controller: Intel Corporation Haswell
Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
Subsystem: Dell Device 05a6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host
Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell Device 05a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee00318 Data: 0000
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation Lynx Point MEI
Controller #1 (rev 04)
Subsystem: Dell Device 05a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7c40000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection
I217-LM (rev 04)
Subsystem: Dell Device 05a6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7c3d000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee002b8 Data: 0000
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced
Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device 05a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c3c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition
Audio Controller (rev 04)
Subsystem: Dell Device 05a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7c30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00378 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=2 ArbSelect=Fixed TC/VC=04
Status: NegoPending- InProgress-
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root
Port #1 (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1,
Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 05a6
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation Lynx Point PCI Express Root
Port #5 (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df200000-df3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 5GT/s, Width x4, ASPM L0s L1,
Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 05a6
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced
Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device 05a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c3b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04)
Subsystem: Dell Device 05a6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA
Controller [RAID mode] (rev 04)
Subsystem: Dell Device 05a6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c3a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee002f8 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04)
Subsystem: Dell Device 05a6
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c39000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
$$$ ============================================================================
$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Haswell DRAM
Controller [8086:0c00] (rev 06)
00:02.0 VGA compatible controller [0300]: Intel Corporation
Haswell Integrated Graphics Controller [8086:0412] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation Lynx Point USB
xHCI Host Controller [8086:8c31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation Lynx
Point MEI Controller #1 [8086:8c3a] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet
Connection I217-LM [8086:153a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation Lynx Point USB
Enhanced Host Controller #2 [8086:8c2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Lynx Point High
Definition Audio Controller [8086:8c20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point PCI
Express Root Port #1 [8086:8c10] (rev d4)
00:1c.4 PCI bridge [0604]: Intel Corporation Lynx Point PCI
Express Root Port #5 [8086:8c18] (rev d4)
00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point USB
Enhanced Host Controller #1 [8086:8c26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point LPC
Controller [8086:8c56] (rev 04)
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA
Controller [RAID mode] [8086:2822] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point SMBus
Controller [8086:8c22] (rev 04)
$$$ ============================================================================
$ cat /proc/scsi/scsi
cat: /proc/scsi/scsi: No such file or directory
$$$ ============================================================================
$ lsusb -v
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 xhci_hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 15
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Port 11: 0000.0100 power
Port 12: 0000.0100 power
Port 13: 0000.0100 power
Port 14: 0000.0100 power
Port 15: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 xhci_hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.02a0 5Gbps power Rx.Detect
Port 2: 0000.02a0 5Gbps power Rx.Detect
Port 3: 0000.02a0 5Gbps power Rx.Detect
Port 4: 0000.02a0 5Gbps power Rx.Detect
Port 5: 0000.02a0 5Gbps power Rx.Detect
Port 6: 0000.0203 5Gbps power U0 enable connect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 15
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 512 micro seconds
Device Status: 0x0001
Self Powered
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x8008
bcdDevice 0.04
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0303 lowspeed power enable connect
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x8000
bcdDevice 0.04
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0503 highspeed power enable connect
Port 5: 0000.0303 lowspeed power enable connect
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 004 Device 002: ID 0451:8046 Texas Instruments, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0x8046
bcdDevice 1.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 19
Transfer Type Interrupt
Synch Type None
Usage Type Feedback
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 8
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 3
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.3 micro seconds
wHubDelay 3203 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.06a0 Unknown Speed power Rx.Detect
Port 2: 0000.06a0 Unknown Speed power Rx.Detect
Port 3: 0000.0203 5Gbps power U0 enable connect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 42
bNumDeviceCaps 3
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Container ID Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 4
bReserved 0
ContainerID {00801541-0045-7278-1315-bbc2b6c9d000}
Device Status: 0x0001
Self Powered
Bus 001 Device 003: ID 0930:6544 Toshiba Corp. Kingston
DataTraveler 2.0 Stick (2GB)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0930 Toshiba Corp.
idProduct 0x6544 Kingston DataTraveler 2.0 Stick (2GB)
bcdDevice 1.00
iManufacturer 1 Kingston
iProduct 2 DataTraveler 2.0
iSerial 3 C86000BDBA11CE806A2A80EF
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 004: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc404 TrackMan Wheel
bcdDevice 2.20
iManufacturer 1 Logitech
iProduct 2 Trackball
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 103
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 002 Device 003: ID 0451:8044 Texas Instruments, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 2 TT per port
bMaxPacketSize0 64
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0x8044
bcdDevice 1.00
iManufacturer 0
iProduct 0
iSerial 1 46000841CE89
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 1 Single TT
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 2 TT per port
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Device Status: 0x0001
Self Powered
Bus 002 Device 004: ID 413c:2107 Dell Computer Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x413c Dell Computer Corp.
idProduct 0x2107
bcdDevice 1.15
iManufacturer 1 Dell
iProduct 2 Dell USB Entry Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 004 Device 003: ID 0451:8046 Texas Instruments, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0x8046
bcdDevice 1.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 19
Transfer Type Interrupt
Synch Type None
Usage Type Feedback
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 8
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 3
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.3 micro seconds
wHubDelay 3203 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.06a0 Unknown Speed power Rx.Detect
Port 2: 0000.06a0 Unknown Speed power Rx.Detect
Port 3: 0000.06a0 Unknown Speed power Rx.Detect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 42
bNumDeviceCaps 3
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Container ID Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 4
bReserved 0
ContainerID {00801541-009d-e5f1-1315-bbc2b6c9d000}
Device Status: 0x0001
Self Powered
Bus 002 Device 005: ID 0451:8044 Texas Instruments, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 2 TT per port
bMaxPacketSize0 64
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0x8044
bcdDevice 1.00
iManufacturer 0
iProduct 0
iSerial 1 83050871CE89
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 1 Single TT
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 2 TT per port
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Device Status: 0x0001
Self Powered
Bus 002 Device 006: ID 0bda:0307 Realtek Semiconductor Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x0307
bcdDevice 1.63
iManufacturer 1 Realtek
iProduct 2 USB3.0 Card Reader
iSerial 3 412180079901
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 CARD READER
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 5 Bulk-In, Bulk-Out, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
$$$ ============================================================================
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64
([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14)
) #1 SMP Debian 3.2.65-1+deb7u2
[ 0.000000] Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=ecf847b1-3b6a-423d-8596-f055ed5317e9 ro
initrd=/install/gtk/initrd.gz quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091800 (usable)
[ 0.000000] BIOS-e820: 0000000000091800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000d2292000 (usable)
[ 0.000000] BIOS-e820: 00000000d2292000 - 00000000d2299000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d2299000 - 00000000d26cb000 (usable)
[ 0.000000] BIOS-e820: 00000000d26cb000 - 00000000d2b5c000 (reserved)
[ 0.000000] BIOS-e820: 00000000d2b5c000 - 00000000d7edb000 (usable)
[ 0.000000] BIOS-e820: 00000000d7edb000 - 00000000d8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000d8000000 - 00000000d8760000 (usable)
[ 0.000000] BIOS-e820: 00000000d8760000 - 00000000d8800000 (reserved)
[ 0.000000] BIOS-e820: 00000000d8800000 - 00000000d8fae000 (usable)
[ 0.000000] BIOS-e820: 00000000d8fae000 - 00000000d9000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d9000000 - 00000000da71d000 (usable)
[ 0.000000] BIOS-e820: 00000000da71d000 - 00000000da800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da800000 - 00000000dbb06000 (usable)
[ 0.000000] BIOS-e820: 00000000dbb06000 - 00000000dc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000dd000000 - 00000000df200000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000081ee00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Precision T1700/0TDG4V, BIOS A13 12/19/2014
[ 0.000000] e820 update range: 0000000000000000 -
0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 -
0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x81ee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DBFFF write-protect
[ 0.000000] DC000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 0800000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 081F000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 081EE00000 mask 7FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000dd000000 -
0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdbb06 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd930] fd930
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dbb06000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00dba00000 page 2M
[ 0.000000] 00dba00000 - 00dbb06000 page 4k
[ 0.000000] kernel direct mapping tables up to dbb06000 @
1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000081ee00000
[ 0.000000] 0100000000 - 0800000000 page 1G
[ 0.000000] 0800000000 - 081ee00000 page 2M
[ 0.000000] kernel direct mapping tables up to 81ee00000 @
dbb04000-dbb06000
[ 0.000000] RAMDISK: 36bee000 - 375ef000
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000d8fed0a0 000BC (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000d8ff8d20 0010C (v05 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI
2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[ 0.000000] ACPI: DSDT 00000000d8fed1e8 0BB35 (v02 DELL CBX3
00000014 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000da7fe080 00040
[ 0.000000] ACPI: APIC 00000000d8ff8e30 00072 (v03 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000d8ff8ea8 00044 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: SLIC 00000000d8ff8ef0 00176 (v03 DELL CBX3
01072009 MSFT 00010013)
[ 0.000000] ACPI: LPIT 00000000d8ff9068 0005C (v01 DELL CBX3
00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000d8ff90c8 00539 (v01 PmRef
Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000d8ff9608 00AD8 (v01 PmRef
CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000d8ffa0e0 001C7 (v01 PmRef
LakeTiny 00003000 INTL 20120711)
[ 0.000000] ACPI: HPET 00000000d8ffa2a8 00038 (v01 DELL CBX3
01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000d8ffa2e0 0036D (v01 SataRe
SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MCFG 00000000d8ffa650 0003C (v01 DELL CBX3
01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000d8ffa690 034D6 (v01 SaSsdt
SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: ASF! 00000000d8ffdb68 000A5 (v32 INTEL
HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: MSDM 00000000d8ffdc10 00055 (v03 DELL CBX3
06222004 AMI 00010013)
[ 0.000000] ACPI: DMAR 00000000d8ffdc68 000B8 (v01 INTEL
HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 00000000d8ffdd20 00130 (v01 AMI AMI
EINJ 00000000 00000000)
[ 0.000000] ACPI: ERST 00000000d8ffde50 00230 (v01 AMIER AMI
ERST 00000000 00000000)
[ 0.000000] ACPI: HEST 00000000d8ffe080 000A8 (v01 AMI AMI
HEST 00000000 00000000)
[ 0.000000] ACPI: BERT 00000000d8ffe128 00030 (v01 AMI AMI
BERT 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000081ee00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000081ee00000
[ 0.000000] NODE_DATA [000000081edfb000 - 000000081edfffff]
[ 0.000000] [ffffea0000000000-ffffea001c7fffff] PMD ->
[ffff8807fe400000-ffff88081a5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0081ee00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[9] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000091
[ 0.000000] 0: 0x00000100 -> 0x000d2292
[ 0.000000] 0: 0x000d2299 -> 0x000d26cb
[ 0.000000] 0: 0x000d2b5c -> 0x000d7edb
[ 0.000000] 0: 0x000d8000 -> 0x000d8760
[ 0.000000] 0: 0x000d8800 -> 0x000d8fae
[ 0.000000] 0: 0x000d9000 -> 0x000da71d
[ 0.000000] 0: 0x000da800 -> 0x000dbb06
[ 0.000000] 0: 0x00100000 -> 0x0081ee00
[ 0.000000] On node 0 totalpages: 8364277
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 879532 pages, LIFO batch:31
[ 0.000000] Normal zone: 102081 pages used for memmap
[ 0.000000] Normal zone: 7364415 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address
0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000091000 -
0000000000092000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000d2292000 -
00000000d2299000
[ 0.000000] PM: Registered nosave memory: 00000000d26cb000 -
00000000d2b5c000
[ 0.000000] PM: Registered nosave memory: 00000000d7edb000 -
00000000d8000000
[ 0.000000] PM: Registered nosave memory: 00000000d8760000 -
00000000d8800000
[ 0.000000] PM: Registered nosave memory: 00000000d8fae000 -
00000000d9000000
[ 0.000000] PM: Registered nosave memory: 00000000da71d000 -
00000000da800000
[ 0.000000] PM: Registered nosave memory: 00000000dbb06000 -
00000000dc000000
[ 0.000000] PM: Registered nosave memory: 00000000dc000000 -
00000000dd000000
[ 0.000000] PM: Registered nosave memory: 00000000dd000000 -
00000000df200000
[ 0.000000] PM: Registered nosave memory: 00000000df200000 -
00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 -
00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at df200000 (gap:
df200000:18e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88081ea00000
s78848 r8192 d23552 u524288
[ 0.000000] pcpu-alloc: s78848 r8192 d23552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping
on. Total pages: 8247855
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=ecf847b1-3b6a-423d-8596-f055ed5317e9 ro
initrd=/install/gtk/initrd.gz quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32911036k/34060288k available (3434k kernel
code, 603180k absent, 546072k reserved, 3305k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3491.975 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated
using timer frequency.. 6983.95 BogoMIPS (lpj=13967900)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000030] AppArmor: AppArmor disabled by boot time parameter
[ 0.001092] Dentry cache hash table entries: 4194304 (order:
13, 33554432 bytes)
[ 0.004779] Inode-cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.006351] Mount-cache hash table entries: 256
[ 0.006413] Initializing cgroup subsys cpuacct
[ 0.006415] Initializing cgroup subsys memory
[ 0.006421] Initializing cgroup subsys devices
[ 0.006422] Initializing cgroup subsys freezer
[ 0.006423] Initializing cgroup subsys net_cls
[ 0.006425] Initializing cgroup subsys blkio
[ 0.006428] Initializing cgroup subsys perf_event
[ 0.006447] CPU: Physical Processor ID: 0
[ 0.006447] CPU: Processor Core ID: 0
[ 0.006450] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.006451] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.007152] mce: CPU supports 9 MCE banks
[ 0.007162] CPU0: Thermal monitoring enabled (TM1)
[ 0.007168] using mwait in idle threads.
[ 0.007392] ACPI: Core revision 20110623
[ 0.012517] DMAR: Host address width 39
[ 0.012518] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.012522] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
c0000020660462 ecap f0101a
[ 0.012523] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.012527] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap
d2008020660462 ecap f010da
[ 0.012528] DMAR: RMRR base: 0x000000dbc76000 end: 0x000000dbc83fff
[ 0.012529] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[ 0.012598] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.012599] HPET id 0 under DRHD base 0xfed91000
[ 0.012703] Enabled IRQ remapping in x2apic mode
[ 0.012704] Enabling x2apic
[ 0.012705] Enabled x2apic
[ 0.012714] Switched APIC routing to cluster x2apic.
[ 0.013135] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052785] CPU0: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz stepping 03
[ 0.157108] Performance Events: no PEBS fmt2+, generic
architected perfmon, Intel PMU driver.
[ 0.157113] ... version: 3
[ 0.157113] ... bit width: 48
[ 0.157114] ... generic registers: 8
[ 0.157115] ... value mask: 0000ffffffffffff
[ 0.157116] ... max period: 000000007fffffff
[ 0.157116] ... fixed-purpose events: 3
[ 0.157117] ... event mask: 00000007000000ff
[ 0.157190] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.157250] Booting Node 0, Processors #1
[ 0.157251] smpboot cpu 1: start_ip = 8c000
[ 0.265832] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.265892] #2
[ 0.265892] smpboot cpu 2: start_ip = 8c000
[ 0.373775] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.373833] #3 Ok.
[ 0.373834] smpboot cpu 3: start_ip = 8c000
[ 0.481614] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.481632] Brought up 4 CPUs
[ 0.481633] Total of 4 processors activated (27935.32 BogoMIPS).
[ 0.484020] devtmpfs: initialized
[ 0.486025] PM: Registering ACPI NVS region at d2292000 (28672 bytes)
[ 0.486026] PM: Registering ACPI NVS region at da71d000 (929792 bytes)
[ 0.486116] print_constraints: dummy:
[ 0.486149] NET: Registered protocol family 16
[ 0.486199] ACPI FADT declares the system doesn't support PCIe
ASPM, so disable it
[ 0.486201] ACPI: bus type pci registered
[ 0.486240] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.486241] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.488659] PCI: Using configuration type 1 for base access
[ 0.488664] dmi type 0xB1 record - unknown flag
[ 0.489304] bio: create slab <bio-0> at 0
[ 0.489354] ACPI: Added _OSI(Module Device)
[ 0.489355] ACPI: Added _OSI(Processor Device)
[ 0.489356] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489357] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.490411] ACPI: EC: Look up EC in DSDT
[ 0.491561] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.493406] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.493620] \_SB_:_OSC invalid UUID
[ 0.493621] _OSC request data:1 17
[ 0.504904] ACPI: SSDT 00000000dbff4c18 003D3 (v01 PmRef
Cpu0Cst 00003001 INTL 20120711)
[ 0.505182] ACPI: Dynamic OEM Table Load:
[ 0.505183] ACPI: SSDT (null) 003D3 (v01 PmRef
Cpu0Cst 00003001 INTL 20120711)
[ 0.516973] ACPI: SSDT 00000000dbff4618 005AA (v01 PmRef
ApIst 00003000 INTL 20120711)
[ 0.517305] ACPI: Dynamic OEM Table Load:
[ 0.517306] ACPI: SSDT (null) 005AA (v01 PmRef
ApIst 00003000 INTL 20120711)
[ 0.528866] ACPI: SSDT 00000000dbff3d98 00119 (v01 PmRef
ApCst 00003000 INTL 20120711)
[ 0.529140] ACPI: Dynamic OEM Table Load:
[ 0.529141] ACPI: SSDT (null) 00119 (v01 PmRef
ApCst 00003000 INTL 20120711)
[ 0.541158] ACPI: Interpreter enabled
[ 0.541161] ACPI: (supports S0 S3 S4 S5)
[ 0.541180] ACPI: Using IOAPIC for interrupt routing
[ 0.615439] ACPI: No dock devices found.
[ 0.615456] HEST: Table parsing has been initialized.
[ 0.615458] PCI: Using host bridge windows from ACPI; if
necessary, use "pci=nocrs" and report a bug
[ 0.615649] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.615943] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.615944] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.615945] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.615946] pci_root PNP0A08:00: host bridge window [mem
0x000dc000-0x000dffff]
[ 0.615947] pci_root PNP0A08:00: host bridge window [mem
0x000e0000-0x000e3fff]
[ 0.615948] pci_root PNP0A08:00: host bridge window [mem
0x000e4000-0x000e7fff]
[ 0.615950] pci_root PNP0A08:00: host bridge window [mem
0xdf200000-0xfeafffff]
[ 0.615957] pci 0000:00:00.0: [8086:0c00] type 0 class 0x000600
[ 0.615992] pci 0000:00:02.0: [8086:0412] type 0 class 0x000300
[ 0.615999] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.616003] pci 0000:00:02.0: reg 18: [mem
0xe0000000-0xefffffff 64bit pref]
[ 0.616006] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.616025] pci 0000:00:03.0: [8086:0c0c] type 0 class 0x000403
[ 0.616030] pci 0000:00:03.0: reg 10: [mem 0xf7c34000-0xf7c37fff 64bit]
[ 0.616079] pci 0000:00:14.0: [8086:8c31] type 0 class 0x000c03
[ 0.616095] pci 0000:00:14.0: reg 10: [mem 0xf7c20000-0xf7c2ffff 64bit]
[ 0.616145] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.616162] pci 0000:00:16.0: [8086:8c3a] type 0 class 0x000780
[ 0.616178] pci 0000:00:16.0: reg 10: [mem 0xf7c40000-0xf7c4000f 64bit]
[ 0.616231] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.616255] pci 0000:00:19.0: [8086:153a] type 0 class 0x000200
[ 0.616269] pci 0000:00:19.0: reg 10: [mem 0xf7c00000-0xf7c1ffff]
[ 0.616276] pci 0000:00:19.0: reg 14: [mem 0xf7c3d000-0xf7c3dfff]
[ 0.616283] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f]
[ 0.616332] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.616353] pci 0000:00:1a.0: [8086:8c2d] type 0 class 0x000c03
[ 0.616370] pci 0000:00:1a.0: reg 10: [mem 0xf7c3c000-0xf7c3c3ff]
[ 0.616445] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.616466] pci 0000:00:1b.0: [8086:8c20] type 0 class 0x000403
[ 0.616478] pci 0000:00:1b.0: reg 10: [mem 0xf7c30000-0xf7c33fff 64bit]
[ 0.616531] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.616548] pci 0000:00:1c.0: [8086:8c10] type 1 class 0x000604
[ 0.616603] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.616624] pci 0000:00:1c.4: [8086:8c18] type 1 class 0x000604
[ 0.616684] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.616710] pci 0000:00:1d.0: [8086:8c26] type 0 class 0x000c03
[ 0.616730] pci 0000:00:1d.0: reg 10: [mem 0xf7c3b000-0xf7c3b3ff]
[ 0.616805] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.616827] pci 0000:00:1f.0: [8086:8c56] type 0 class 0x000601
[ 0.616930] pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104
[ 0.616943] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
[ 0.616949] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
[ 0.616955] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
[ 0.616961] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
[ 0.616967] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.616973] pci 0000:00:1f.2: reg 24: [mem 0xf7c3a000-0xf7c3a7ff]
[ 0.617003] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.617016] pci 0000:00:1f.3: [8086:8c22] type 0 class 0x000c05
[ 0.617028] pci 0000:00:1f.3: reg 10: [mem 0xf7c39000-0xf7c390ff 64bit]
[ 0.617045] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.617095] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.617136] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.617151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.617220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.617241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.617323] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.617441] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.620579] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10
*11 12 14 15)
[ 0.620616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11
12 14 15) *0, disabled.
[ 0.620647] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10
11 12 14 15)
[ 0.620677] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10
11 12 14 15)
[ 0.620714] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10
11 12 14 15)
[ 0.620749] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11
12 14 15) *0, disabled.
[ 0.620780] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10
11 12 14 15)
[ 0.620809] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10
*11 12 14 15)
[ 0.620862] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.620865] vgaarb: loaded
[ 0.620866] vgaarb: bridge control possible 0000:00:02.0
[ 0.620885] PCI: Using ACPI for IRQ routing
[ 0.622090] PCI: pci_cache_line_size set to 64 bytes
[ 0.622134] reserve RAM buffer: 0000000000091800 - 000000000009ffff
[ 0.622135] reserve RAM buffer: 00000000d2292000 - 00000000d3ffffff
[ 0.622136] reserve RAM buffer: 00000000d26cb000 - 00000000d3ffffff
[ 0.622137] reserve RAM buffer: 00000000d7edb000 - 00000000d7ffffff
[ 0.622138] reserve RAM buffer: 00000000d8760000 - 00000000dbffffff
[ 0.622139] reserve RAM buffer: 00000000d8fae000 - 00000000dbffffff
[ 0.622141] reserve RAM buffer: 00000000da71d000 - 00000000dbffffff
[ 0.622142] reserve RAM buffer: 00000000dbb06000 - 00000000dbffffff
[ 0.622143] reserve RAM buffer: 000000081ee00000 - 000000081fffffff
[ 0.622206] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.622209] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.624221] Switching to clocksource hpet
[ 0.625253] pnp: PnP ACPI init
[ 0.625259] ACPI: bus type pnp registered
[ 0.625412] pnp 00:00: [bus 00-3e]
[ 0.625413] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.625414] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.625415] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.625416] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.625417] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.625418] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.625419] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.625420] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.625421] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.625422] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.625423] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.625424] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.625425] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.625426] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.625427] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.625428] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.625429] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.625430] pnp 00:00: [mem 0xdf200000-0xfeafffff window]
[ 0.625458] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08
PNP0a03 (active)
[ 0.625469] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.625488] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.625489] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.625495] pnp 00:02: [io 0x0000-0x001f]
[ 0.625496] pnp 00:02: [io 0x0081-0x0091]
[ 0.625497] pnp 00:02: [io 0x0093-0x009f]
[ 0.625497] pnp 00:02: [io 0x00c0-0x00df]
[ 0.625499] pnp 00:02: [dma 4]
[ 0.625509] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.625513] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.625523] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.625580] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.625591] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.625611] pnp 00:05: [io 0x00f0]
[ 0.625623] pnp 00:05: [irq 13]
[ 0.625634] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.625681] pnp 00:06: [io 0x002e-0x002f]
[ 0.625682] pnp 00:06: [io 0x004e-0x004f]
[ 0.625683] pnp 00:06: [io 0x0061]
[ 0.625683] pnp 00:06: [io 0x0063]
[ 0.625684] pnp 00:06: [io 0x0065]
[ 0.625685] pnp 00:06: [io 0x0067]
[ 0.625686] pnp 00:06: [io 0x0070]
[ 0.625686] pnp 00:06: [io 0x0080]
[ 0.625687] pnp 00:06: [io 0x0092]
[ 0.625688] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.625689] pnp 00:06: [io 0x0680-0x069f]
[ 0.625690] pnp 00:06: [io 0xffff]
[ 0.625690] pnp 00:06: [io 0xffff]
[ 0.625691] pnp 00:06: [io 0xffff]
[ 0.625692] pnp 00:06: [io 0x1c00-0x1cfe]
[ 0.625693] pnp 00:06: [io 0x1d00-0x1dfe]
[ 0.625694] pnp 00:06: [io 0x1e00-0x1efe]
[ 0.625694] pnp 00:06: [io 0x1f00-0x1ffe]
[ 0.625695] pnp 00:06: [io 0x1800-0x18fe]
[ 0.625697] pnp 00:06: [io 0x164e-0x164f]
[ 0.625717] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.625718] system 00:06: [io 0xffff] has been reserved
[ 0.625719] system 00:06: [io 0xffff] has been reserved
[ 0.625720] system 00:06: [io 0xffff] has been reserved
[ 0.625722] system 00:06: [io 0x1c00-0x1cfe] has been reserved
[ 0.625723] system 00:06: [io 0x1d00-0x1dfe] has been reserved
[ 0.625724] system 00:06: [io 0x1e00-0x1efe] has been reserved
[ 0.625725] system 00:06: [io 0x1f00-0x1ffe] has been reserved
[ 0.625726] system 00:06: [io 0x1800-0x18fe] has been reserved
[ 0.625727] system 00:06: [io 0x164e-0x164f] has been reserved
[ 0.625729] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.625733] pnp 00:07: [io 0x0070-0x0077]
[ 0.625743] pnp 00:07: [irq 8]
[ 0.625754] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.625769] pnp 00:08: [io 0x1854-0x1857]
[ 0.625786] system 00:08: [io 0x1854-0x1857] has been reserved
[ 0.625787] system 00:08: Plug and Play ACPI device, IDs
INT3f0d PNP0c02 (active)
[ 0.625830] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.625832] pnp 00:09: [io 0x0a00-0x0a0f]
[ 0.625833] pnp 00:09: [io 0x0a40-0x0a3f disabled]
[ 0.625850] system 00:09: [io 0x0a00-0x0a0f] has been reserved
[ 0.625851] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.625862] pnp 00:0a: [io 0x0010-0x001f]
[ 0.625863] pnp 00:0a: [io 0x0022-0x003f]
[ 0.625864] pnp 00:0a: [io 0x0044-0x005f]
[ 0.625865] pnp 00:0a: [io 0x0062-0x0063]
[ 0.625865] pnp 00:0a: [io 0x0065-0x006f]
[ 0.625866] pnp 00:0a: [io 0x0072-0x007f]
[ 0.625867] pnp 00:0a: [io 0x0080]
[ 0.625868] pnp 00:0a: [io 0x0084-0x0086]
[ 0.625869] pnp 00:0a: [io 0x0088]
[ 0.625869] pnp 00:0a: [io 0x008c-0x008e]
[ 0.625870] pnp 00:0a: [io 0x0090-0x009f]
[ 0.625871] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.625872] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.625873] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.625890] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.625892] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.626367] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.626377] pnp 00:0b: [irq 4]
[ 0.626378] pnp 00:0b: [dma 0 disabled]
[ 0.626407] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.626717] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 0.626718] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 0.626719] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 0.626720] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 0.626721] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 0.626722] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 0.626723] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 0.626724] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 0.626725] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 0.626726] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 0.626727] pnp 00:0c: [mem 0xf7fee000-0xf7feefff]
[ 0.626727] pnp 00:0c: [mem 0xf7fd0000-0xf7fdffff]
[ 0.626756] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.626757] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.626758] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.626759] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.626760] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.626762] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.626763] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.626764] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.626765] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.626767] system 00:0c: [mem 0xfee00000-0xfeefffff] could not
be reserved
[ 0.626768] system 00:0c: [mem 0xf7fee000-0xf7feefff] has been reserved
[ 0.626769] system 00:0c: [mem 0xf7fd0000-0xf7fdffff] has been reserved
[ 0.626771] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.626926] pnp: PnP ACPI: found 13 devices
[ 0.626927] ACPI: ACPI bus type pnp unregistered
[ 0.632962] PCI: max bus depth: 1 pci_try_num: 2
[ 0.632978] pci 0000:00:1c.4: BAR 14: assigned [mem
0xdf200000-0xdf3fffff]
[ 0.632980] pci 0000:00:1c.4: BAR 15: assigned [mem
0xdf400000-0xdf5fffff 64bit pref]
[ 0.632982] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.632983] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.632997] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.632999] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.633003] pci 0000:00:1c.4: bridge window [mem 0xdf200000-0xdf3fffff]
[ 0.633007] pci 0000:00:1c.4: bridge window [mem
0xdf400000-0xdf5fffff 64bit pref]
[ 0.633022] pci 0000:00:1c.0: setting latency timer to 64
[ 0.633029] pci 0000:00:1c.4: setting latency timer to 64
[ 0.633032] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.633033] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.633034] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.633035] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff]
[ 0.633036] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
[ 0.633037] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff]
[ 0.633038] pci_bus 0000:00: resource 10 [mem 0xdf200000-0xfeafffff]
[ 0.633039] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.633040] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf3fffff]
[ 0.633041] pci_bus 0000:02: resource 2 [mem
0xdf400000-0xdf5fffff 64bit pref]
[ 0.633091] NET: Registered protocol family 2
[ 0.634403] IP route cache hash table entries: 524288 (order:
10, 4194304 bytes)
[ 0.634943] TCP established hash table entries: 524288 (order:
11, 8388608 bytes)
[ 0.635735] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.635828] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.635830] TCP reno registered
[ 0.635850] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.635916] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.636029] NET: Registered protocol family 1
[ 0.636036] pci 0000:00:02.0: Boot video device
[ 0.636330] pci 0000:00:14.0: power state changed by ACPI to D0
[ 0.636342] pci 0000:00:14.0: power state changed by ACPI to D0
[ 0.676202] PCI: CLS 64 bytes, default 64
[ 0.676228] Unpacking initramfs...
[ 0.797859] Freeing initrd memory: 10244k freed
[ 0.798449] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.798451] Placing 64MB software IO TLB between
ffff8800d3edb000 - ffff8800d7edb000
[ 0.798452] software IO TLB at phys 0xd3edb000 - 0xd7edb000
[ 0.798813] audit: initializing netlink socket (disabled)
[ 0.798819] type=2000 audit(1429773874.640:1): initialized
[ 0.807725] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.809597] VFS: Disk quotas dquot_6.5.2
[ 0.809620] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.809666] msgmni has been set to 32768
[ 0.809775] alg: No test for stdrng (krng)
[ 0.809794] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.809796] io scheduler noop registered
[ 0.809796] io scheduler deadline registered
[ 0.809810] io scheduler cfq registered (default)
[ 0.809940] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.809950] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.809951] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.810098] acpiphp: Slot [1] registered
[ 0.810136] acpiphp: Slot [1-1] registered
[ 0.810198] intel_idle: does not run on family 6 model 60
[ 0.810232] ERST: Error Record Serialization Table (ERST)
support is initialized.
[ 0.810287] GHES: APEI firmware first mode is enabled by APEI
bit and WHEA _OSC.
[ 0.810323] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.830879] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.044580] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.044808] Linux agpgart interface v0.103
[ 1.044872] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.047609] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.047612] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.047687] mousedev: PS/2 mouse device common for all mice
[ 1.047719] rtc_cmos 00:07: RTC can wake from S4
[ 1.047805] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.047832] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.047838] cpuidle: using governor ladder
[ 1.047838] cpuidle: using governor menu
[ 1.047940] TCP cubic registered
[ 1.047993] NET: Registered protocol family 10
[ 1.048230] Mobile IPv6
[ 1.048231] NET: Registered protocol family 17
[ 1.048233] Registering the dns_resolver key type
[ 1.048316] PM: Hibernation image not present or could not be loaded.
[ 1.048321] registered taskstats version 1
[ 1.049374] rtc_cmos 00:07: setting system clock to 2015-04-23
07:24:35 UTC (1429773875)
[ 1.049414] Initializing network drop monitor service
[ 1.049984] Freeing unused kernel memory: 576k freed
[ 1.050017] Write protecting the kernel read-only data: 6144k
[ 1.051248] Freeing unused kernel memory: 644k freed
[ 1.052558] Freeing unused kernel memory: 688k freed
[ 1.058320] udevd[57]: starting version 175
[ 1.067444] usbcore: registered new interface driver usbfs
[ 1.067458] usbcore: registered new interface driver hub
[ 1.070368] SCSI subsystem initialized
[ 1.077312] usbcore: registered new device driver usb
[ 1.077522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.077563] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.077565] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.077578] ehci_hcd 0000:00:1a.0: new USB bus registered,
assigned bus number 1
[ 1.077608] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.077880] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.077882] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.078043] libata version 3.00 loaded.
[ 1.081507] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.082945] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c3c000
[ 1.085335] ACPI: Invalid active0 threshold
[ 1.085383] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.085385] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.085466] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.085467] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.095884] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.095906] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.095907] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.095908] usb usb1: Product: EHCI Host Controller
[ 1.095909] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.095910] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.095983] hub 1-0:1.0: USB hub found
[ 1.095985] hub 1-0:1.0: 2 ports detected
[ 1.096064] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.096067] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.096071] ehci_hcd 0000:00:1d.0: new USB bus registered,
assigned bus number 2
[ 1.096098] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.099982] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.099993] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7c3b000
[ 1.115820] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.115834] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.115836] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.115837] usb usb2: Product: EHCI Host Controller
[ 1.115837] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.115838] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.115900] hub 2-0:1.0: USB hub found
[ 1.115902] hub 2-0:1.0: 2 ports detected
[ 1.115968] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.116010] e1000e 0000:00:19.0: Interrupt Throttling Rate
(ints/sec) set to dynamic conservative mode
[ 1.116039] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1.286766] e1000e 0000:00:19.0: eth0: (PCI
Express:2.5GT/s:Width x1) 98:90:96:99:75:8a
[ 1.286768] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000
Network Connection
[ 1.286822] e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 12, PBA
No: FFFFFF-0FF
[ 1.286834] ahci 0000:00:1f.2: version 3.0
[ 1.286882] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.286924] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports
6 Gbps 0x7 impl RAID mode
[ 1.286925] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio
slum part ems apst
[ 1.286928] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.299907] scsi0 : ahci
[ 1.299973] scsi1 : ahci
[ 1.300005] scsi2 : ahci
[ 1.300042] scsi3 : ahci
[ 1.300076] scsi4 : ahci
[ 1.300108] scsi5 : ahci
[ 1.300355] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port
0xf7c3a100 irq 43
[ 1.300357] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port
0xf7c3a180 irq 43
[ 1.300360] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port
0xf7c3a200 irq 43
[ 1.300361] ata4: DUMMY
[ 1.300361] ata5: DUMMY
[ 1.300362] ata6: DUMMY
[ 1.300380] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[ 1.300383] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[ 1.300402] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.300405] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.300411] xhci_hcd 0000:00:14.0: new USB bus registered,
assigned bus number 3
[ 1.300491] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.300528] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 1.300565] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.300566] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.300567] usb usb3: Product: xHCI Host Controller
[ 1.300568] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.300569] usb usb3: SerialNumber: 0000:00:14.0
[ 1.300615] xHCI xhci_add_endpoint called for root hub
[ 1.300616] xHCI xhci_check_bandwidth called for root hub
[ 1.300631] hub 3-0:1.0: USB hub found
[ 1.300650] hub 3-0:1.0: 15 ports detected
[ 1.300711] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.300713] xhci_hcd 0000:00:14.0: new USB bus registered,
assigned bus number 4
[ 1.300731] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.300732] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.300733] usb usb4: Product: xHCI Host Controller
[ 1.300734] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.300735] usb usb4: SerialNumber: 0000:00:14.0
[ 1.300775] xHCI xhci_add_endpoint called for root hub
[ 1.300776] xHCI xhci_check_bandwidth called for root hub
[ 1.300788] hub 4-0:1.0: USB hub found
[ 1.300802] hub 4-0:1.0: 6 ports detected
[ 1.407572] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.539868] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.539870] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.540004] hub 1-1:1.0: USB hub found
[ 1.540112] hub 1-1:1.0: 6 ports detected
[ 1.619400] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.619415] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.619429] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.620393] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET
FEATURES) succeeded
[ 1.620395] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
FREEZE LOCK) filtered out
[ 1.620396] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1.620535] ata3.00: ATA-9: MKNSSDRE1TB, N1007C, max UDMA/133
[ 1.620536] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ
(depth 31/32), AA
[ 1.620781] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET
FEATURES) succeeded
[ 1.620783] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
FREEZE LOCK) filtered out
[ 1.620784] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1.620916] ata3.00: configured for UDMA/133
[ 1.623626] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET
FEATURES) succeeded
[ 1.623628] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
FREEZE LOCK) filtered out
[ 1.623629] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1.625533] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A1B0, max UDMA/100
[ 1.628962] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET
FEATURES) succeeded
[ 1.628963] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
FREEZE LOCK) filtered out
[ 1.628965] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1.629282] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET
FEATURES) succeeded
[ 1.629287] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
FREEZE LOCK) filtered out
[ 1.629289] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1.631213] ata2.00: configured for UDMA/100
[ 1.651361] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.655198] ata1.00: ATA-8: ST500LM021-1KJ152, 0002SDM1, max UDMA/133
[ 1.655200] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.677120] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET
FEATURES) succeeded
[ 1.677121] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
FREEZE LOCK) filtered out
[ 1.677123] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1.703356] ata1.00: configured for UDMA/133
[ 1.703434] scsi 0:0:0:0: Direct-Access ATA
ST500LM021-1KJ15 0002 PQ: 0 ANSI: 5
[ 1.705237] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW
GTA0N A1B0 PQ: 0 ANSI: 5
[ 1.705332] scsi 2:0:0:0: Direct-Access ATA
MKNSSDRE1TB N100 PQ: 0 ANSI: 5
[ 1.707297] sd 0:0:0:0: [sda] 976773168 512-byte logical
blocks: (500 GB/465 GiB)
[ 1.707298] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.707338] sd 2:0:0:0: [sdb] 1953525168 512-byte logical
blocks: (1.00 TB/931 GiB)
[ 1.707358] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.707360] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.707366] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.707627] sd 0:0:0:0: [sda] Write Protect is off
[ 1.707629] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.707646] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.707755] sdb: sdb1 sdb2 < sdb5 >
[ 1.707936] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.709925] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 1.709926] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.709985] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.724071] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.724118] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.724141] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.731847] sda: sda1 sda2 sda3
[ 1.732039] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.783654] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.783656] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.783801] hub 2-1:1.0: USB hub found
[ 1.783902] hub 2-1:1.0: 8 ports detected
[ 1.795237] Refined TSC clocksource calibration: 3491.913 MHz.
[ 1.795240] Switching to clocksource tsc
[ 1.895173] usb 4-6: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.911351] usb 4-6: New USB device found, idVendor=0451, idProduct=8046
[ 1.911353] usb 4-6: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.911602] hub 4-6:1.0: USB hub found
[ 1.911631] hub 4-6:1.0: 3 ports detected
[ 1.983240] usb 1-1.3: new high-speed USB device number 3 using ehci_hcd
[ 2.077174] usb 1-1.3: New USB device found, idVendor=0930,
idProduct=6544
[ 2.077176] usb 1-1.3: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
[ 2.077177] usb 1-1.3: Product: DataTraveler 2.0
[ 2.077178] usb 1-1.3: Manufacturer: Kingston
[ 2.077179] usb 1-1.3: SerialNumber: C86000BDBA11CE806A2A80EF
[ 2.091262] Initializing USB Mass Storage driver...
[ 2.091307] scsi6 : usb-storage 1-1.3:1.0
[ 2.091346] usbcore: registered new interface driver usb-storage
[ 2.091347] USB Mass Storage support registered.
[ 2.146975] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
[ 2.244137] usb 1-1.4: New USB device found, idVendor=046d,
idProduct=c404
[ 2.244139] usb 1-1.4: New USB device strings: Mfr=1,
Product=2, SerialNumber=0
[ 2.244141] usb 1-1.4: Product: Trackball
[ 2.244142] usb 1-1.4: Manufacturer: Logitech
[ 2.249733] input: Logitech Trackball as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
[ 2.249771] generic-usb 0003:046D:C404.0001: input,hidraw0: USB
HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.4/input0
[ 2.249779] usbcore: registered new interface driver usbhid
[ 2.249780] usbhid: USB HID core driver
[ 2.306198] PM: Starting manual resume from disk
[ 2.306200] PM: Hibernation image partition 8:21 present
[ 2.306201] PM: Looking for hibernation image.
[ 2.306348] PM: Image not found (code -22)
[ 2.306349] PM: Hibernation image not present or could not be loaded.
[ 2.314829] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
[ 2.346164] EXT4-fs (sdb1): mounted filesystem with ordered
data mode. Opts: (null)
[ 2.407626] usb 2-1.4: New USB device found, idVendor=0451,
idProduct=8044
[ 2.407628] usb 2-1.4: New USB device strings: Mfr=0,
Product=0, SerialNumber=1
[ 2.407630] usb 2-1.4: SerialNumber: 46000841CE89
[ 2.407765] hub 2-1.4:1.0: USB hub found
[ 2.407879] hub 2-1.4:1.0: 3 ports detected
[ 2.478823] usb 2-1.5: new low-speed USB device number 4 using ehci_hcd
[ 2.570236] udevd[392]: starting version 175
[ 2.577855] usb 2-1.5: New USB device found, idVendor=413c,
idProduct=2107
[ 2.577857] usb 2-1.5: New USB device strings: Mfr=1,
Product=2, SerialNumber=0
[ 2.577859] usb 2-1.5: Product: Dell USB Entry Keyboard
[ 2.577860] usb 2-1.5: Manufacturer: Dell
[ 2.581579] input: Dell Dell USB Entry Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input1
[ 2.581616] generic-usb 0003:413C:2107.0002: input,hidraw1: USB
HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on
usb-0000:00:1d.0-1.5/input0
[ 2.602841] ACPI: Requesting acpi_cpufreq
[ 2.603066] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.603070] ACPI: Power Button [PWRB]
[ 2.606917] Monitor-Mwait will be used to enter C-1 state
[ 2.606923] Monitor-Mwait will be used to enter C-2 state
[ 2.606929] ACPI: acpi_idle registered with cpuidle
[ 2.607619] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.607623] ACPI: Power Button [PWRF]
[ 2.611063] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f]
conflicts with ACPI region SMBI [io 0xf040-0xf04f]
[ 2.611065] ACPI: If an ACPI driver is available for this
device, you should use it instead of the native driver
[ 2.611166] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.611174] iTCO_vendor_support: vendor-support=0
[ 2.611912] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.611958] iTCO_wdt: Found a Lynx Point TCO device (Version=2,
TCOBASE=0x1860)
[ 2.611994] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.616075] wmi: Mapper loaded
[ 2.624804] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X
[ 2.624818] snd_hda_intel 0000:00:03.0: setting latency timer to 64
[ 2.635754] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 2.649226] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.650991] usb 4-6.3: new SuperSpeed USB device number 3 using xhci_hcd
[ 2.666745] usb 4-6.3: New USB device found, idVendor=0451,
idProduct=8046
[ 2.666747] usb 4-6.3: New USB device strings: Mfr=0,
Product=0, SerialNumber=0
[ 2.667047] hub 4-6.3:1.0: USB hub found
[ 2.667076] hub 4-6.3:1.0: 3 ports detected
[ 2.738680] usb 2-1.4.3: new high-speed USB device number 5
using ehci_hcd
[ 2.831865] usb 2-1.4.3: New USB device found, idVendor=0451,
idProduct=8044
[ 2.831874] usb 2-1.4.3: New USB device strings: Mfr=0,
Product=0, SerialNumber=1
[ 2.831880] usb 2-1.4.3: SerialNumber: 83050871CE89
[ 2.832440] hub 2-1.4.3:1.0: USB hub found
[ 2.832581] hub 2-1.4.3:1.0: 3 ports detected
[ 3.102368] usb 2-1.4.3.3: new high-speed USB device number 6
using ehci_hcd
[ 3.106432] scsi 6:0:0:0: Direct-Access Kingston
DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[ 3.108375] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.109099] sd 6:0:0:0: [sdc] 15148608 512-byte logical blocks:
(7.75 GB/7.22 GiB)
[ 3.109721] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.109730] sd 6:0:0:0: [sdc] Mode Sense: 45 00 00 00
[ 3.110398] sd 6:0:0:0: [sdc] Write cache: disabled, read
cache: enabled, doesn't support DPO or FUA
[ 3.117191] sdc: sdc1
[ 3.119333] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.290843] usb 2-1.4.3.3: New USB device found, idVendor=0bda,
idProduct=0307
[ 3.290853] usb 2-1.4.3.3: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
[ 3.290858] usb 2-1.4.3.3: Product: USB3.0 Card Reader
[ 3.290863] usb 2-1.4.3.3: Manufacturer: Realtek
[ 3.290866] usb 2-1.4.3.3: SerialNumber: 412180079901
[ 3.296872] scsi7 : usb-storage 2-1.4.3.3:1.0
[ 4.299966] scsi 7:0:0:0: Direct-Access Generic-
SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 4
[ 4.301609] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 4.311591] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 5.652015] hda-intel: azx_get_response timeout, switching to
polling mode: last cmd=0x000f0000
[ 6.655164] hda-intel: No response from codec, disabling MSI:
last cmd=0x000f0000
[ 7.658322] hda-intel: Codec #0 probe error; disabling it...
[ 8.677445] hda_intel: azx_get_response timeout, switching to
single_cmd mode: last cmd=0x000f0001
[ 8.683053] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 8.683114] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.736971] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[ 9.196695] Adding 39519228k swap on /dev/sdb5. Priority:-1
extents:1 across:39519228k SS
[ 9.225301] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 9.377956] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 9.410137] loop: module loaded
[ 9.951881] fuse init (API version 7.17)
[ 10.654638] RPC: Registered named UNIX socket transport module.
[ 10.654645] RPC: Registered udp transport module.
[ 10.654649] RPC: Registered tcp transport module.
[ 10.654652] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.662677] FS-Cache: Loaded
[ 10.674215] FS-Cache: Netfs 'nfs' registered for caching
[ 10.682168] Installing knfsd (copyright (C) 1996 [email protected]).
[ 11.153334] Bluetooth: Core ver 2.16
[ 11.153344] NET: Registered protocol family 31
[ 11.153345] Bluetooth: HCI device and connection manager initialized
[ 11.153347] Bluetooth: HCI socket layer initialized
[ 11.153347] Bluetooth: L2CAP socket layer initialized
[ 11.153350] Bluetooth: SCO socket layer initialized
[ 11.155012] Bluetooth: RFCOMM TTY layer initialized
[ 11.155015] Bluetooth: RFCOMM socket layer initialized
[ 11.155016] Bluetooth: RFCOMM ver 1.11
[ 11.170710] lp: driver loaded but no devices found
[ 11.172568] ppdev: user-space parallel port driver
[ 11.186086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.186088] Bluetooth: BNEP filters: protocol multicast
[ 11.344511] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 11.447097] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 11.447729] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.066139] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input6
$$$ ============================================================================
$ cat /etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
echo 1 > /sys/devices/pci0000:00/0000:00:03.0/remove
exit 0
$$$ ============================================================================
$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 42 0 0 0 IR-IO-APIC-edge timer
1: 3 0 0 0 IR-IO-APIC-edge i8042
7: 5 0 0 0 IR-IO-APIC-edge
8: 1 0 0 0 IR-IO-APIC-edge rtc0
9: 0 0 0 0 IR-IO-APIC-fasteoi acpi
12: 4 0 0 0 IR-IO-APIC-edge i8042
16: 1248 0 0 0
IR-IO-APIC-fasteoi ehci_hcd:usb1
23: 299 0 0 0
IR-IO-APIC-fasteoi ehci_hcd:usb2
40: 0 0 0 0 DMAR_MSI-edge dmar0
41: 0 0 0 0 DMAR_MSI-edge dmar1
42: 2 0 0 0 IR-PCI-MSI-edge eth0
43: 8419 0 0 0 IR-PCI-MSI-edge ahci
44: 78 0 0 0 IR-PCI-MSI-edge
xhci_hcd
45: 231 0 0 0 IR-PCI-MSI-edge
snd_hda_intel
NMI: 2 1 1 1 Non-maskable interrupts
LOC: 1910 1711 1719 1634 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 2 1 1 1 Performance
monitoring interrupts
IWI: 0 0 0 0 IRQ work interrupts
RES: 2905 4303 4452 3507 Rescheduling interrupts
CAL: 364 642 658 627 Function call interrupts
TLB: 685 839 829 689 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
ERR: 5
MIS: 0
$$$ ============================================================================
$ dpkg -l | grep "$(uname -r)"
ii linux-headers-3.2.0-4-amd64 3.2.65-1+deb7u2
amd64 Header files for Linux 3.2.0-4-amd64
ii linux-image-3.2.0-4-amd64 3.2.65-1+deb7u2
amd64 Linux 3.2 for 64-bit PCs
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
