From: "Peter E. Berger" <[email protected]>
I found that when using newer Edgeport devices such as the EP/416,
idle ports are regularly bounced (disconnected and then reconnected).
I discussed this with the manufacturer (Digi International) and learned
that some newer Edgeport devices now ship from the factory running
firmware that requires periodic heartbeat messages from the driver, so
I enclose a proposed set of patches to implement their suggested mechanism
(which works both with old and new Edgeport devices).
While developing my heartbeat patches, I discovered that the firmware
download code was not working properly, so I also include a set of
proposed patches to fix this.
I welcome any comments or suggestions.
Thanks.
--Peter
Changes since v4 [1]
Addressing Johan's review comments. Thanks Johan!
Following Johan's suggestion, for v5 I have reorganized the original two
patches into ten smaller and more incremental ones. While implementing
the reorganization I also made these specific changes:
- Expand comment describing the need for heartbeat code.
- Add comment describing the format of the (currently unused) firmware
"build_number".
- Add a "timeout" argument to ti_vsend_vsync() (rather than checking
for UMPC_COPY_DNLD_TO_I2C) and update the call sites. Also add two
new defines for the firmware-download timeouts.
- Fix indentation error in build_i2c_fw_hdr().
- Replace dev_dbg() with dev_err() for "Failed to load image" message
in edge_startup().
- Fix whitespace in definition of FW_HEARTBEAT_VERSION_CUTOFF.
- Rename the struct work_struct argument in edge_heartbeat_work() from
"taskp" to "work".
- Add "\n", skip period and use dev_err() (instead of dev_warn()) for
the "Incomplete heartbeat" message in edge_heartbeat_work().
- Remove stray newline in edge_heartbeat_work().
- Drop unneeded serial number dev_dbg() in edge_startup().
- Call INIT_DELAYED_WORK unconditionally.
- Refactor heartbeat rescheduling code, including the test against
FW_HEARTBEAT_VERSION_CUTOFF, to an inline helper function --
edge_heartbeat_reschedule() -- and use it in edge_startup() and
edge_resume().
- Call cancel_delayed_work_sync() unconditionally in edge_release()
and edge_suspend().
[1]: v4: http://marc.info/?l=linux-usb&m=143379313606490&w=2
Peter E. Berger (10):
USB: io_ti: Increase insufficient timeout for firmware downloads
USB: io_ti: Add timeout parameter to ti_vsend_sync()
USB: io_ti: Move request_firmware() calls out of download_fw()
USB: io_ti: Add fw_version field to edgeport_serial
USB: io_ti: Add comment describing the unused firmware build_number
USB: io_ti: Add heartbeat to keep idle Edgeport ports from
disconnecting
USB: io_ti: dev_dbg() and dev_err() changes in edge_startup()
USB: io_ti: Call INIT_DELAYED_WORK unconditionally in edge_startup()
USB: io_ti: Add edge_heartbeat_reschedule() helper function
USB: io_ti: Call cancel_delayed_work_sync() unconditionally
drivers/usb/serial/io_ti.c | 205 ++++++++++++++++++++++++++++++++-------------
1 file changed, 146 insertions(+), 59 deletions(-)
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
