hi
On Wed, 2015-07-22 at 21:11 +0300, Sergei Shtylyov wrote:
> Hello.
>
> On 07/22/2015 05:05 PM, Chunfeng Yun wrote:
>
> > add xHCI and phy drivers for MT8173-EVB
>
> > Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 ++++++++++++++
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 31
> > +++++++++++++++++++++++++++++
> > 2 files changed, 46 insertions(+)
>
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > index f433c21..202b2b9 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > @@ -13,6 +13,7 @@
> > */
> >
> > /dts-v1/;
> > +#include <dt-bindings/gpio/gpio.h>
> > #include "mt8173.dtsi"
> >
> > / {
> > @@ -32,6 +33,15 @@
> > };
> >
> > chosen { };
> > +
> > + usb_p1_vbus: fixedregulator@0 {
>
> Just "regulator@0" please. This is more in line with what ePAPR requires
> from the node names.
>
> > + compatible = "regulator-fixed";
> > + regulator-name = "usb_vbus";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + };
> > };
> >
> > &pwrap {
> [...]
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index 0696f8f..aa1ecc7 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> [...]
> > @@ -393,6 +394,36 @@
> > #size-cells = <0>;
> > status = "disabled";
> > };
> > +
> > + usb: usb30@11270000 {
>
> ePAPR standardizes the name "usb" for such nodes, please fix.
>
> [...]
>
ok, I'll revise it, thanks a lot
> MBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
