When I try to use a Superspeed device with the USB 3 ports provided by this
device I get kernel errors (see attached).
The device works fine with HiSpeed (USB2) etc. devices. Please advise.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.2.3 (root@Alice) (gcc version 4.9.3 (GCC) ) #3
SMP Mon Oct 5 10:38:43 BST 2015
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dff90000-0x00000000dffa7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dffa8000-0x00000000dffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dffd0000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A78L-M LE, BIOS
0510 08/20/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff]
[ 0.000000] [mem 0x20000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01795000, 0x01795fff] PGTABLE
[ 0.000000] BRK [0x01796000, 0x01796fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB470 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x00000000DFF90100 00005C (v01 082010 XSDT1149
20100820 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000DFF90290 0000F4 (v03 082010 FACP1149
20100820 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has
zero address or length: 0x0000000000000000/0x1 (20150619/tbfadt-654)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in
FADT/Gpe0Block: 64/32 (20150619/tbfadt-623)
[ 0.000000] ACPI: DSDT 0x00000000DFF90450 00D41B (v01 A1458 A1458001
00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000DFFA8000 000040
[ 0.000000] ACPI: FACS 0x00000000DFFA8000 000040
[ 0.000000] ACPI: APIC 0x00000000DFF90390 00007C (v01 082010 APIC1149
20100820 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000DFF90410 00003C (v01 082010 OEMMCFG
20100820 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000DFFA8040 000072 (v01 082010 OEMB1149
20100820 MSFT 00000097)
[ 0.000000] ACPI: SRAT 0x00000000DFF9F450 0000E8 (v01 AMD FAM_F_10
00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000DFF9F540 000038 (v01 082010 OEMHPET
20100820 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000DFF9F580 00088C (v01 A M I POWERNOW
00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3588MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff]
[ 0.000000] HighMem [mem 0x0000000037bfe000-0x0000000117ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dff8ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000117ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000117ffffff]
[ 0.000000] On node 0 totalpages: 1015598
[ 0.000000] free_area_init_node: node 0, pgdat c16d3880, node_mem_map
f58fe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 787346 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xe0000000-0xffefffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 17 pages/cpu @f58a8000 s37964 r0 d31668 u69632
[ 0.000000] pcpu-alloc: s37964 r0 d31668 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1013814
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.3 ro root=/dev/sda2
userpte=nohigh radeon.modeset=1 iommu=pt iommu=1 radeon.dpm=1
drm_kms_helper.edid_firmware=edid/1600x1200.bin
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 524288 bytes
[ 0.000000] early log buf free: 123560(94%)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00118000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 4017052K/4062392K available (5171K kernel code, 287K
rwdata, 1552K rodata, 344K init, 316K bss, 45340K reserved, 0K cma-reserved,
3149384K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc16dc000 - 0xc1732000 ( 344 kB)
.data : 0xc150cff5 - 0xc16daf40 (1847 kB)
.text : 0xc1000000 - 0xc150cff5 (5171 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3013.547 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6029.22 BogoMIPS (lpj=10045156)
[ 0.000143] pid_max: default: 32768 minimum: 301
[ 0.000206] ACPI: Core revision 20150619
[ 0.005122] ACPI: All ACPI Tables successfully acquired
[ 0.005249] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.005311] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.005519] Initializing cgroup subsys blkio
[ 0.005581] Initializing cgroup subsys devices
[ 0.005642] Initializing cgroup subsys net_cls
[ 0.005716] CPU: Physical Processor ID: 0
[ 0.005776] CPU: Processor Core ID: 0
[ 0.005838] mce: CPU supports 6 MCE banks
[ 0.005903] LVT offset 0 assigned for vector 0xf9
[ 0.005966] process: using AMD E400 aware idle routine
[ 0.006028] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.006089] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.006251] Freeing SMP alternatives memory: 20K (c1732000 - c1737000)
[ 0.014392] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.014797] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.152255] smpboot: CPU0: AMD Phenom(tm) II X4 940 Processor (fam: 10,
model: 04, stepping: 02)
[ 0.152443] Performance Events: AMD PMU driver.
[ 0.152533] ... version: 0
[ 0.152593] ... bit width: 48
[ 0.152653] ... generic registers: 4
[ 0.152714] ... value mask: 0000ffffffffffff
[ 0.152774] ... max period: 00007fffffffffff
[ 0.152835] ... fixed-purpose events: 0
[ 0.152895] ... event mask: 000000000000000f
[ 0.153149] CPU 1 irqstacks, hard=f50ee000 soft=f50f8000
[ 0.153151] x86: Booting SMP configuration:
[ 0.153211] .... node #0, CPUs: #1
[ 0.154909] Initializing CPU#1
[ 0.157038] process: System has AMD C1E enabled
[ 0.157064] CPU 2 irqstacks, hard=f510a000 soft=f510c000
[ 0.157230] #2
[ 0.157230] process: Switch to broadcast mode on CPU1
[ 0.158077] Initializing CPU#2
[ 0.160203] process: Switch to broadcast mode on CPU2
[ 0.160222] CPU 3 irqstacks, hard=f5116000 soft=f5118000
[ 0.161235] #3
[ 0.161236] Initializing CPU#3
[ 0.163347] x86: Booted up 1 node, 4 CPUs
[ 0.163360] process: Switch to broadcast mode on CPU3
[ 0.163590] smpboot: Total of 4 processors activated (24118.89 BogoMIPS)
[ 0.168255] process: Switch to broadcast mode on CPU0
[ 0.168419] devtmpfs: initialized
[ 0.168741] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 6370867519511994 ns
[ 0.168881] pinctrl core: initialized pinctrl subsystem
[ 0.169066] NET: Registered protocol family 16
[ 0.180666] cpuidle: using governor ladder
[ 0.200663] cpuidle: using governor menu
[ 0.200729] node 0 link 0: io port [1000, ffffff]
[ 0.200731] TOM: 00000000e0000000 aka 3584M
[ 0.200792] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.200794] node 0 link 0: mmio [a0000, bffff]
[ 0.200796] node 0 link 0: mmio [e0000000, f7ffffff] ==> [f0000000, f7ffffff]
[ 0.200798] node 0 link 0: mmio [f8000000, fe7fffff]
[ 0.200799] node 0 link 0: mmio [fe800000, fe9fffff]
[ 0.200800] node 0 link 0: mmio [fea00000, ffefffff]
[ 0.200801] TOM2: 0000000120000000 aka 4608M
[ 0.200862] bus: [bus 00-07] on node 0 link 0
[ 0.200863] bus: 00 [io 0x0000-0xffff]
[ 0.200864] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.200865] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.200865] bus: 00 [mem 0x120000000-0xfcffffffff]
[ 0.200928] ACPI: bus type PCI registered
[ 0.200989] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.201078] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.201174] PCI: not using MMCONFIG
[ 0.201843] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it
NX.
[ 0.201969] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.202031] PCI: Using configuration type 1 for base access
[ 0.202092] PCI: Using configuration type 1 for extended access
[ 0.203651] ACPI: Added _OSI(Module Device)
[ 0.203713] ACPI: Added _OSI(Processor Device)
[ 0.203773] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.203835] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.205727] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.261080] ACPI: Interpreter enabled
[ 0.261147] ACPI: (supports S0 S5)
[ 0.261208] ACPI: Using IOAPIC for interrupt routing
[ 0.261284] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.262375] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
[ 0.262470] PCI: Using MMCONFIG for extended config space
[ 0.262548] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.266770] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.266835] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.266900] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.267146] PCI host bridge to bus 0000:00
[ 0.267207] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.267269] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.267335] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.268361] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.268423] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff
window]
[ 0.268486] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff
window]
[ 0.268555] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.268642] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
[ 0.268716] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.268745] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.268798] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
[ 0.268826] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.268894] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.268919] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
[ 0.268928] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
[ 0.268936] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
[ 0.268945] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
[ 0.268953] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
[ 0.268962] pci 0000:00:11.0: reg 0x24: [mem 0xfe7ffc00-0xfe7fffff]
[ 0.269040] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.269055] pci 0000:00:12.0: reg 0x10: [mem 0xfe7fe000-0xfe7fefff]
[ 0.269158] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.269173] pci 0000:00:12.1: reg 0x10: [mem 0xfe7fd000-0xfe7fdfff]
[ 0.269279] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.269303] pci 0000:00:12.2: reg 0x10: [mem 0xfe7ff800-0xfe7ff8ff]
[ 0.269364] pci 0000:00:12.2: supports D1 D2
[ 0.269365] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.269429] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.269443] pci 0000:00:13.0: reg 0x10: [mem 0xfe7fc000-0xfe7fcfff]
[ 0.269545] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.269559] pci 0000:00:13.1: reg 0x10: [mem 0xfe7fb000-0xfe7fbfff]
[ 0.269666] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.269690] pci 0000:00:13.2: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff]
[ 0.269751] pci 0000:00:13.2: supports D1 D2
[ 0.269752] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.269819] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.269948] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.269970] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.269979] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.269987] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.269995] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.270004] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.270023] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.270085] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.270147] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.270209] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.270338] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.270363] pci 0000:00:14.2: reg 0x10: [mem 0xfe7f4000-0xfe7f7fff 64bit]
[ 0.270415] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.270471] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.270590] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.270677] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.270692] pci 0000:00:14.5: reg 0x10: [mem 0xfe7fa000-0xfe7fafff]
[ 0.270797] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.270850] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.270903] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.270954] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.271009] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.271098] pci 0000:01:05.0: [1002:9616] type 00 class 0x030000
[ 0.271108] pci 0000:01:05.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.271112] pci 0000:01:05.0: reg 0x14: [io 0xd000-0xd0ff]
[ 0.271115] pci 0000:01:05.0: reg 0x18: [mem 0xfe9f0000-0xfe9fffff]
[ 0.271124] pci 0000:01:05.0: reg 0x24: [mem 0xfe800000-0xfe8fffff]
[ 0.271136] pci 0000:01:05.0: supports D1 D2
[ 0.271192] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.271255] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.271257] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.271260] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff
64bit pref]
[ 0.271300] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.271326] pci 0000:02:00.0: reg 0x10: [mem 0xfeafe000-0xfeafffff 64bit]
[ 0.271383] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.277396] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.277460] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.277513] pci 0000:03:00.0: [1969:1063] type 00 class 0x020000
[ 0.277549] pci 0000:03:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.277559] pci 0000:03:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.277625] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.284078] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.284142] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.284144] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.284215] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.284283] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window]
(subtractive decode)
[ 0.284285] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window]
(subtractive decode)
[ 0.284286] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff
window] (subtractive decode)
[ 0.284288] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff
window] (subtractive decode)
[ 0.284289] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff
window] (subtractive decode)
[ 0.284305] pci_bus 0000:00: on NUMA node 0
[ 0.284831] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.285164] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
[ 0.285496] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.285829] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.286163] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.286550] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.286938] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *7 10 11 12 14 15)
[ 0.287271] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.287680] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.287869] vgaarb: setting as boot device: PCI:0000:01:05.0
[ 0.287930] vgaarb: device added:
PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.287993] vgaarb: loaded
[ 0.288054] vgaarb: bridge control possible 0000:01:05.0
[ 0.288370] SCSI subsystem initialized
[ 0.288470] libata version 3.00 loaded.
[ 0.288510] PCI: Using ACPI for IRQ routing
[ 0.288572] PCI: pci_cache_line_size set to 64 bytes
[ 0.288618] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.288620] e820: reserve RAM buffer [mem 0xdff90000-0xdfffffff]
[ 0.288752] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.288948] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.291046] clocksource: Switched to clocksource hpet
[ 0.291189] pnp: PnP ACPI init
[ 0.291358] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291395] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.291806] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.291872] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.291934] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292086] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.292152] system 00:03: [io 0x040b] has been reserved
[ 0.292213] system 00:03: [io 0x04d6] has been reserved
[ 0.292275] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.292337] system 00:03: [io 0x0c14] has been reserved
[ 0.292399] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.292461] system 00:03: [io 0x0c52] has been reserved
[ 0.292523] system 00:03: [io 0x0c6c] has been reserved
[ 0.292584] system 00:03: [io 0x0c6f] has been reserved
[ 0.292646] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.292707] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.292769] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.292831] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.292892] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.292954] system 00:03: [io 0x0b00-0x0b3f] has been reserved
[ 0.293016] system 00:03: [io 0x0800-0x089f] could not be reserved
[ 0.293078] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.293140] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.293202] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.293264] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.293326] system 00:03: [io 0xfe00-0xfefe] has been reserved
[ 0.293388] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.293451] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.293513] system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.293576] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.293713] system 00:04: [io 0x0230-0x023f] has been reserved
[ 0.293780] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.293842] system 00:04: [io 0x0300-0x030f] has been reserved
[ 0.293904] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.293967] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294036] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.294105] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294206] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.294275] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.294337] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.294423] system 00:06: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.294486] system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.294548] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.294617] pnp: PnP ACPI: found 7 devices
[ 0.331473] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.331590] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.331652] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.331715] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.331777] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff
64bit pref]
[ 0.331841] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.331903] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.331967] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.332028] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.332091] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.332155] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.332226] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.332227] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.332228] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.332230] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.332231] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window]
[ 0.332232] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.332233] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.332235] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit
pref]
[ 0.332236] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.332237] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.332239] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.332240] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.332241] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.332243] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.332244] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.332245] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xfebfffff window]
[ 0.332270] NET: Registered protocol family 2
[ 0.332444] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.332526] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.332610] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.332688] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.332753] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.332846] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.728137] pci 0000:01:05.0: Video device with shadowed ROM
[ 0.728235] PCI: CLS 64 bytes, default 64
[ 0.728306] LVT offset 1 assigned for vector 0x400
[ 0.728379] IBS: LVT offset 1 assigned
[ 0.728456] perf: AMD IBS detected (0x0000001f)
[ 0.728857] Scanning for low memory corruption every 60 seconds
[ 0.729119] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.729201] Initialise system trusted keyring
[ 0.731221] bounce: pool size: 64 pages
[ 0.731341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.731412] io scheduler noop registered
[ 0.731473] io scheduler deadline registered
[ 0.731564] io scheduler cfq registered (default)
[ 0.731910] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.731987] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.732206] Linux agpgart interface v0.103
[ 0.732283] [drm] Initialized drm 1.1.0 20060810
[ 0.732367] [drm] radeon kernel modesetting enabled.
[ 0.732639] [drm] initializing kernel modesetting (RS780 0x1002:0x9616
0x1043:0x8388).
[ 0.732710] [drm] register mmio base: 0xFE9F0000
[ 0.732770] [drm] register mmio size: 65536
[ 0.733930] ATOM BIOS: B27732
[ 0.734004] radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 -
0x00000000C7FFFFFF (128M used)
[ 0.734102] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 -
0x00000000BFFFFFFF
[ 0.734167] [drm] Detected VRAM RAM=128M, BAR=128M
[ 0.734229] [drm] RAM width 32bits DDR
[ 0.734360] [TTM] Zone kernel: Available graphics memory: 433844 kiB
[ 0.734422] [TTM] Zone highmem: Available graphics memory: 2008536 kiB
[ 0.734485] [TTM] Initializing pool allocator
[ 0.734549] [TTM] Initializing DMA pool allocator
[ 0.734625] [drm] radeon: 128M of VRAM memory ready
[ 0.734714] [drm] radeon: 512M of GTT memory ready.
[ 0.734775] [drm] Loading RS780 Microcode
[ 0.734838] request_firmware returned 0 (0xf4925998 'radeon/RS780_pfp.bin'
0xf526b864)
[ 0.734903] request_firmware returned 0 (0xf4925994 'radeon/RS780_me.bin'
0xf526b864)
[ 0.734966] request_firmware returned 0 (0xf492599c 'radeon/R600_rlc.bin'
0xf526b864)
[ 0.735032] == power state 0 ==
[ 0.735093] ui class: none
[ 0.735180] internal class: boot
[ 0.735295] caps: video
[ 0.735409] uvd vclk: 0 dclk: 0
[ 0.735471] power level 0 sclk: 35000 vddc_index: 2
[ 0.735532] power level 1 sclk: 35000 vddc_index: 2
[ 0.735593] status: c r b
[ 0.735760] == power state 1 ==
[ 0.735820] ui class: performance
[ 0.735907] internal class: none
[ 0.736020] caps: video
[ 0.736134] uvd vclk: 0 dclk: 0
[ 0.736195] power level 0 sclk: 35000 vddc_index: 2
[ 0.736255] power level 1 sclk: 35000 vddc_index: 2
[ 0.736316] status:
[ 0.736402] == power state 2 ==
[ 0.736462] ui class: none
[ 0.736549] internal class: uvd
[ 0.736662] caps: video
[ 0.736776] uvd vclk: 53300 dclk: 40000
[ 0.736836] power level 0 sclk: 40000 vddc_index: 2
[ 0.736897] power level 1 sclk: 40000 vddc_index: 2
[ 0.736957] status:
[ 0.746259] [drm] radeon: dpm initialized
[ 0.746442] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.764219] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 0.764507] radeon 0000:01:05.0: WB enabled
[ 0.764716] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr
0x00000000a0000c00 and cpu addr 0xffc01c00
[ 0.765036] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.765218] [drm] Driver supports precise vblank timestamp query.
[ 0.765401] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 0.765618] [drm] radeon: irq initialized.
[ 0.798290] [drm] ring test on 0 succeeded in 3 usecs
[ 0.798965] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.799406] [drm] Radeon Display Connectors
[ 0.799600] [drm] Connector 0:
[ 0.799780] [drm] VGA-1
[ 0.799962] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 0.800144] [drm] Encoders:
[ 0.800325] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 0.800608] switching from power state:
[ 0.800837] ui class: none
[ 0.801068] internal class: boot
[ 0.801360] caps: video
[ 0.801652] uvd vclk: 0 dclk: 0
[ 0.801833] power level 0 sclk: 35000 vddc_index: 2
[ 0.802014] power level 1 sclk: 35000 vddc_index: 2
[ 0.802196] status: c b
[ 0.802521] switching to power state:
[ 0.802702] ui class: performance
[ 0.802933] internal class: none
[ 0.803209] caps: video
[ 0.803483] uvd vclk: 0 dclk: 0
[ 0.803664] power level 0 sclk: 35000 vddc_index: 2
[ 0.803846] power level 1 sclk: 35000 vddc_index: 2
[ 0.804028] status: r
[ 0.835273] [drm] Got built-in EDID base block and 0 extensions from
"edid/1600x1200.bin" for connector "VGA-1"
[ 0.853527] [drm] fb mappable at 0xF0141000
[ 0.853588] [drm] vram apper at 0xF0000000
[ 0.853648] [drm] size 7680000
[ 0.853707] [drm] fb depth is 24
[ 0.853767] [drm] pitch is 6400
[ 0.853886] fbcon: radeondrmfb (fb0) is primary device
[ 0.907288] Console: switching to colour frame buffer device 200x75
[ 0.924292] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 0.924367] radeon 0000:01:05.0: registered panic notifier
[ 0.924429] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:05.0 on
minor 0
[ 0.924938] ahci 0000:00:11.0: version 3.0
[ 0.925118] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 0.925219] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part ccc
[ 0.925977] scsi host0: ahci
[ 0.926115] scsi host1: ahci
[ 0.926247] scsi host2: ahci
[ 0.926376] scsi host3: ahci
[ 0.926505] scsi host4: ahci
[ 0.926645] scsi host5: ahci
[ 0.926728] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00
irq 22
[ 0.926820] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80
irq 22
[ 0.926908] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00
irq 22
[ 0.926995] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80
irq 22
[ 0.927083] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00
irq 22
[ 0.927172] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80
irq 22
[ 0.927405] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring
disabled
[ 0.927683] NET: Registered protocol family 17
[ 0.927945] Using IPI Shortcut mode
[ 0.928103] Loading compiled-in X.509 certificates
[ 0.928178] registered taskstats version 1
[ 0.928446] hctosys: unable to open rtc device (rtc0)
[ 1.245064] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.245165] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.245263] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.245354] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.245455] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.245553] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.245631] ata2.00: supports DRM functions and may not be fully accessible
[ 1.246092] ata1.00: ATA-9: M4-CT128M4SSD2, 070H, max UDMA/100
[ 1.246160] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.246433] ata2.00: ATA-10: Crucial_CT250MX200SSD1, MU02, max UDMA/133
[ 1.246512] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.247129] ata1.00: configured for UDMA/100
[ 1.247287] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 070H
PQ: 0 ANSI: 5
[ 1.247597] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119
GiB)
[ 1.247709] ata2.00: supports DRM functions and may not be fully accessible
[ 1.247835] sd 0:0:0:0: [sda] Write Protect is off
[ 1.247899] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.247936] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.248535] sda: sda1 sda2 sda3
[ 1.248720] Elevator cfqd->cfq_slice_idle = 0, blk_queue_nonrot(q) 1
[ 1.248999] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.249642] ata2.00: configured for UDMA/133
[ 1.253120] scsi 1:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU02
PQ: 0 ANSI: 5
[ 1.256733] ata2.00: Enabling discard_zeroes_data
[ 1.260262] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232
GiB)
[ 1.263813] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.267383] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.270924] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.270933] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.274650] ata2.00: Enabling discard_zeroes_data
[ 1.278645] sdb: sdb1
[ 1.282418] Elevator cfqd->cfq_slice_idle = 0, blk_queue_nonrot(q) 1
[ 1.286181] ata2.00: Enabling discard_zeroes_data
[ 1.289972] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.299552] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 1.303390] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 1.307343] Freeing unused kernel memory: 344K (c16dc000 - c1732000)
[ 1.449624] ACPI: bus type USB registered
[ 1.453560] usbcore: registered new interface driver usbfs
[ 1.457508] usbcore: registered new interface driver hub
[ 1.461465] usbcore: registered new device driver usb
[ 1.466872] usbcore: registered new interface driver usb-storage
[ 1.731922] tsc: Refined TSC clocksource calibration: 3013.529 MHz
[ 1.739733] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x2b7031c730b, max_idle_ns: 440795344785 ns
[ 2.759189] clocksource: Switched to clocksource tsc
[ 3.189784] loop: module loaded
[ 3.197231] brd: module loaded
[ 3.203565] Multiple stream splitter driver V0.2b
[ 3.210138] Multiple stream fifo driver V0.2c
[ 3.219645] RPC: Registered named UNIX socket transport module.
[ 3.223700] RPC: Registered udp transport module.
[ 3.227721] RPC: Registered tcp transport module.
[ 3.231665] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.238425] Installing knfsd (copyright (C) 1996 [email protected]).
[ 3.249391] FS-Cache: Loaded
[ 3.255470] FS-Cache: Netfs 'nfs' registered for caching
[ 3.269763] Key type encrypted registered
[ 3.282966] device-mapper: uevent: version 1.0.3
[ 3.287304] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised:
[email protected]
[ 3.296259] FS-Cache: Netfs 'cifs' registered for caching
[ 3.350115] NET: Registered protocol family 1
[ 3.354996] udevd[980]: starting version 182
[ 3.373560] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.378854] ACPI: processor limited to max C-state 1
[ 3.379003] rtc_cmos 00:01: RTC can wake from S4
[ 3.379718] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.379744] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram,
hpet irqs
[ 3.380448] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.380632] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.381070] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.381074] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.382066] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.383661] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.383666] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 1
[ 3.383797] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96
quirks 0x00000004
[ 3.384033] hub 1-0:1.0: USB hub found
[ 3.384040] hub 1-0:1.0: 2 ports detected
[ 3.384135] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.384137] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 2
[ 3.387059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.387908] ehci-pci: EHCI PCI platform driver
[ 3.387947] usb usb2: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 3.388063] hub 2-0:1.0: USB hub found
[ 3.388069] hub 2-0:1.0: 2 ports detected
[ 3.390594] scsi host6: pata_atiixp
[ 3.390675] scsi host7: pata_atiixp
[ 3.390713] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.390715] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 3.390929] ACPI Warning: SystemIO range
0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion
0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150619/utaddress-254)
[ 3.390932] ACPI Warning: SystemIO range
0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion
0x0000000000000B00-0x0000000000000B2F (\SMRG) (20150619/utaddress-254)
[ 3.390935] ACPI Warning: SystemIO range
0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion
0x0000000000000B00-0x0000000000000B2F (\_SB_.PCI0.SBRG.ASOC.SMRG)
(20150619/utaddress-254)
[ 3.390936] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 3.391057] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.391063] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus
number 3
[ 3.391065] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 3.391078] ehci-pci 0000:00:12.2: debug port 1
[ 3.391109] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe7ff800
[ 3.395015] microcode: CPU0: patch_level=0x01000086
[ 3.395018] request_firmware returned 0 (0xf45b1d94
'amd-ucode/microcode_amd.bin' 0xf443900c)
[ 3.399744] microcode: CPU0: new patch_level=0x010000db
[ 3.400093] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 3.400125] sp5100_tco: PCI Revision ID: 0x3c
[ 3.400142] sp5100_tco: failed to find MMIO address, giving up.
[ 3.400218] microcode: CPU1: patch_level=0x01000086
[ 3.400222] microcode: CPU1: new patch_level=0x010000db
[ 3.400226] microcode: CPU2: patch_level=0x01000086
[ 3.400229] microcode: CPU2: new patch_level=0x010000db
[ 3.400234] microcode: CPU3: patch_level=0x01000086
[ 3.400238] microcode: CPU3: new patch_level=0x010000db
[ 3.400261] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 3.402900] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.403028] hub 3-0:1.0: USB hub found
[ 3.403033] hub 3-0:1.0: 6 ports detected
[ 3.403272] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.403276] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus
number 4
[ 3.403280] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 3.403292] ehci-pci 0000:00:13.2: debug port 1
[ 3.403324] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe7ff400
[ 3.405233] kvm: Nested Virtualization enabled
[ 3.405234] kvm: Nested Paging enabled
[ 3.406522] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.407123] ohci-pci: OHCI PCI platform driver
[ 3.409911] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[ 3.412919] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.413069] hub 4-0:1.0: USB hub found
[ 3.413074] hub 4-0:1.0: 6 ports detected
[ 3.413699] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 3.413704] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus
number 5
[ 3.413716] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe7fe000
[ 3.420258] ACPI: Power Button [PWRB]
[ 3.420339] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.420377] ACPI: Power Button [PWRF]
[ 3.422741] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S:
line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 3.422742] snd_hda_codec_via hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 3.422743] snd_hda_codec_via hdaudioC0D0: hp_outs=1
(0x1d/0x0/0x0/0x0/0x0)
[ 3.422744] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 3.422745] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
[ 3.422746] snd_hda_codec_via hdaudioC0D0: inputs:
[ 3.422748] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 3.422749] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 3.422750] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 3.429534] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 3.429746] input: HDA ATI SB Front Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 3.429802] input: HDA ATI SB Line as
/devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 3.429869] input: HDA ATI SB Line Out as
/devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 3.429919] input: HDA ATI SB Front Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 3.470443] hub 5-0:1.0: USB hub found
[ 3.470451] hub 5-0:1.0: 3 ports detected
[ 3.470626] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 3.470630] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus
number 6
[ 3.470643] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe7fd000
[ 3.527132] hub 6-0:1.0: USB hub found
[ 3.527139] hub 6-0:1.0: 3 ports detected
[ 3.527295] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.527298] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus
number 7
[ 3.527309] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe7fc000
[ 3.583832] hub 7-0:1.0: USB hub found
[ 3.583839] hub 7-0:1.0: 3 ports detected
[ 3.583995] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 3.583999] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus
number 8
[ 3.584010] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe7fb000
[ 3.640526] hub 8-0:1.0: USB hub found
[ 3.640533] hub 8-0:1.0: 3 ports detected
[ 3.640690] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 3.640693] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus
number 9
[ 3.640705] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe7fa000
[ 3.689732] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 3.697219] hub 9-0:1.0: USB hub found
[ 3.697226] hub 9-0:1.0: 2 ports detected
[ 3.709745] usb 3-3: new high-speed USB device number 2 using ehci-pci
[ 3.817053] ata7.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-106S 0109, E1.09,
max UDMA/66
[ 3.823702] ata7.00: configured for UDMA/66
[ 3.826184] scsi 6:0:0:0: CD-ROM PIONEER DVD-ROM DVD-106 1.09
PQ: 0 ANSI: 5
[ 3.834038] hub 3-3:1.0: USB hub found
[ 3.834183] hub 3-3:1.0: 4 ports detected
[ 3.852123] sr 6:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda
tray
[ 3.852124] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.852219] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 3.852225] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 3.915370] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.930271] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.939999] usb 3-6: new high-speed USB device number 3 using ehci-pci
[ 3.956552] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 3.963232] scsi host8: usb-storage 2-2:1.0
[ 4.071605] hub 3-6:1.0: USB hub found
[ 4.078896] hub 3-6:1.0: 4 ports detected
[ 4.153438] usb 3-3.3: new full-speed USB device number 4 using ehci-pci
[ 4.216979] random: vgchange urandom read with 69 bits of entropy available
[ 4.259107] hub 3-3.3:1.0: USB hub found
[ 4.266262] hub 3-3.3:1.0: 4 ports detected
[ 4.297597] sr 6:0:0:0: [sr0] CDROM not ready. Make sure there is a disc in
the drive.
[ 4.334276] sr 6:0:0:0: [sr0] CDROM not ready. Make sure there is a disc in
the drive.
[ 4.490067] Adding 8388604k swap on /dev/mapper/cryptswap0. Priority:1
extents:1 across:8388604k SSFS
[ 4.527234] EXT4-fs (sda2): re-mounted. Opts: discard
[ 4.543606] usb 3-3.3.1: new low-speed USB device number 5 using ehci-pci
[ 4.598933] EXT4-fs (sda2): re-mounted. Opts: discard
[ 4.652878] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
discard
[ 4.678473] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.711104] usbcore: registered new interface driver usbhid
[ 4.716247] usbhid: USB HID core driver
[ 4.722289] input: ATEN USB KVMP w. OSD as
/devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3.3/3-3.3.1/3-3.3.1:1.0/0003:0557:2213.0001/input/input10
[ 4.773817] hid-generic 0003:0557:2213.0001: input,hidraw0: USB HID v1.00
Keyboard [ATEN USB KVMP w. OSD] on usb-0000:00:12.2-3.3.1/input0
[ 4.779462] input: ATEN USB KVMP w. OSD as
/devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3.3/3-3.3.1/3-3.3.1:1.1/0003:0557:2213.0002/input/input11
[ 4.785148] hid-generic 0003:0557:2213.0002: input,hidraw1: USB HID v1.00
Mouse [ATEN USB KVMP w. OSD] on usb-0000:00:12.2-3.3.1/input1
[ 4.794209] mousedev: PS/2 mouse device common for all mice
[ 4.972015] scsi 8:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 4.981148] sd 8:0:0:0: [sdc] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 4.990707] sd 8:0:0:0: [sdc] Write Protect is off
[ 4.999323] sd 8:0:0:0: [sdc] Mode Sense: 2b 00 00 08
[ 5.000363] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.189753] sdc: sdc1 sdc2 sdc3
[ 5.200825] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 5.217441] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 5.958228] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full
Duplex>
[ 6.945074] usb 2-2: USB disconnect, device number 2
[ 7.202181] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[ 7.227899] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 7.239542] scsi host9: usb-storage 2-2:1.0
[ 8.250615] scsi 9:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 8.260601] sd 9:0:0:0: [sdc] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 8.271181] sd 9:0:0:0: [sdc] Write Protect is off
[ 8.277577] sd 9:0:0:0: [sdc] Mode Sense: 2b 00 00 08
[ 8.278559] sd 9:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 8.289920] sdc: sdc1 sdc2 sdc3
[ 8.289943] random: nonblocking pool is initialized
[ 8.302581] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 8.319212] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 9.989947] NET: Registered protocol family 10
[ 10.972399] [drm] Got built-in EDID base block and 0 extensions from
"edid/1600x1200.bin" for connector "VGA-1"
[ 17.518033] usb 2-2: USB disconnect, device number 3
[ 17.771688] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd
[ 17.792734] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 17.799650] scsi host10: usb-storage 2-2:1.0
[ 18.028454] usb 2-2: USB disconnect, device number 4
[ 18.255819] usb 2-2: new SuperSpeed USB device number 5 using xhci_hcd
[ 18.276763] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 18.280142] scsi host11: usb-storage 2-2:1.0
[ 18.504908] [drm] Got built-in EDID base block and 0 extensions from
"edid/1600x1200.bin" for connector "VGA-1"
[ 18.535946] [drm] Got built-in EDID base block and 0 extensions from
"edid/1600x1200.bin" for connector "VGA-1"
[ 19.016300] usb 2-2: USB disconnect, device number 5
[ 19.250601] [drm] Got built-in EDID base block and 0 extensions from
"edid/1600x1200.bin" for connector "VGA-1"
[ 19.250762] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd
[ 19.272119] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 19.272274] scsi host12: usb-storage 2-2:1.0
[ 19.437733] [drm] Got built-in EDID base block and 0 extensions from
"edid/1600x1200.bin" for connector "VGA-1"
[ 19.470066] [drm] Got built-in EDID base block and 0 extensions from
"edid/1600x1200.bin" for connector "VGA-1"
[ 20.275729] scsi 12:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 20.276336] sd 12:0:0:0: [sdc] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 20.277077] sd 12:0:0:0: [sdc] Write Protect is off
[ 20.277089] sd 12:0:0:0: [sdc] Mode Sense: 2b 00 00 08
[ 20.277813] sd 12:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 20.283592] sdc: sdc1 sdc2 sdc3
[ 20.283984] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 20.286124] sd 12:0:0:0: [sdc] Attached SCSI removable disk
[ 21.565603] usb 2-2: USB disconnect, device number 6
[ 21.816195] usb 2-2: new SuperSpeed USB device number 7 using xhci_hcd
[ 21.833917] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 21.834079] scsi host13: usb-storage 2-2:1.0
[ 22.837652] scsi 13:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 22.838331] sd 13:0:0:0: [sdc] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 22.839025] sd 13:0:0:0: [sdc] Write Protect is off
[ 22.839032] sd 13:0:0:0: [sdc] Mode Sense: 2b 00 00 08
[ 22.839987] sd 13:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 22.844509] sdc: sdc1 sdc2 sdc3
[ 22.844703] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 22.847289] sd 13:0:0:0: [sdc] Attached SCSI removable disk
[ 33.101707] sr 6:0:0:0: [sr0] CDROM not ready. Make sure there is a disc in
the drive.
[ 33.131758] sr 6:0:0:0: [sr0] CDROM not ready. Make sure there is a disc in
the drive.
[ 36.444941] usb 2-2: USB disconnect, device number 7
[ 36.688800] usb 2-2: new SuperSpeed USB device number 8 using xhci_hcd
[ 36.708145] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 36.708306] scsi host14: usb-storage 2-2:1.0
[ 37.586108] usb 2-2: USB disconnect, device number 8
[ 37.816667] usb 2-2: new SuperSpeed USB device number 9 using xhci_hcd
[ 37.835665] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 37.835857] scsi host15: usb-storage 2-2:1.0
[ 38.838908] scsi 15:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 38.839489] sd 15:0:0:0: [sdc] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 38.840202] sd 15:0:0:0: [sdc] Write Protect is off
[ 38.840213] sd 15:0:0:0: [sdc] Mode Sense: 2b 00 00 08
[ 38.840931] sd 15:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 38.846555] sdc: sdc1 sdc2 sdc3
[ 38.846967] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 38.849421] sd 15:0:0:0: [sdc] Attached SCSI removable disk
[ 40.559292] usb 2-2: USB disconnect, device number 9
[ 40.799848] usb 2-2: new SuperSpeed USB device number 10 using xhci_hcd
[ 40.819152] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 40.819340] scsi host16: usb-storage 2-2:1.0
[ 41.825174] scsi 16:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 41.825721] sd 16:0:0:0: [sdc] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 41.826772] sd 16:0:0:0: [sdc] Write Protect is off
[ 41.826780] sd 16:0:0:0: [sdc] Mode Sense: 2b 00 00 08
[ 41.827666] sd 16:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 41.833551] sdc: sdc1 sdc2 sdc3
[ 41.833993] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 41.836499] sd 16:0:0:0: [sdc] Attached SCSI removable disk
[ 51.324796] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts:
(null)
[ 53.523104] usb 2-2: USB disconnect, device number 10
[ 53.750423] usb 2-2: new SuperSpeed USB device number 11 using xhci_hcd
[ 53.772728] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 53.772869] scsi host17: usb-storage 2-2:1.0
[ 54.775678] scsi 17:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 54.776248] sd 17:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 54.777097] sd 17:0:0:0: [sdd] Write Protect is off
[ 54.777105] sd 17:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 54.777859] sd 17:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 54.783888] sdd: sdd1 sdd2 sdd3
[ 54.784286] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 54.786430] sd 17:0:0:0: [sdd] Attached SCSI removable disk
[ 54.819343] EXT4-fs warning (device sdc3): htree_dirblock_to_tree:959: inode
#2: lblock 0: comm ls: error -5 reading directory block
[ 54.819373] EXT4-fs error (device sdc3): __ext4_get_inode_loc:3927: inode
#2: block 501: comm ls: unable to read itable block
[ 54.819380] EXT4-fs error (device sdc3) in ext4_reserve_inode_write:4962: IO
failure
[ 54.819384] ------------[ cut here ]------------
[ 54.819395] WARNING: CPU: 0 PID: 2097 at fs/fs-writeback.c:2080
__mark_inode_dirty+0x14d/0x200()
[ 54.819397] bdi-block not registered
[ 54.819399] Modules linked in: ipv6 mousedev hid_generic usbhid hid
jitterentropy_rng drbg ansi_cprng dm_crypt acpi_cpufreq sr_mod cdrom
snd_hda_codec_via snd_hda_codec_generic psmouse serio_raw atkbd ohci_pci libps2
ohci_hcd evdev kvm_amd kvm sp5100_tco snd_hda_intel snd_hda_codec snd_hda_core
snd_hwdep microcode snd_pcm snd_timer snd soundcore ehci_pci ehci_hcd i2c_piix4
pata_atiixp xhci_pci atl1c xhci_hcd shpchp 8250_fintek 8250 i8042 serio
serial_core rtc_cmos processor asus_atk0110 button thermal_sys unix cifs dm_mod
md5 ecryptfs cbc sha256_generic hmac encrypted_keys nfs fscache nfsd lockd
grace sunrpc fifo splitter brd loop eeprom usb_storage usbcore usb_common
ati_agp
[ 54.819502] CPU: 0 PID: 2097 Comm: ls Not tainted 4.2.3 #3
[ 54.819506] Hardware name: System manufacturer System Product Name/M4A78L-M
LE, BIOS 0510 08/20/2010
[ 54.819509] 00000000 c1504267 f37b5ef0 c1043fc8 c161b7a0 f37b5f08 00000831
c161b78e
[ 54.819520] 00000820 c112554d c112554d 00000820 f208f4d0 c0c0ea08 00000000
f208f4fc
[ 54.819530] c1044033 00000009 f37b5ef0 c161b7a0 f37b5f08 c112554d c161b78e
00000820
[ 54.819539] Call Trace:
[ 54.819548] [<c1504267>] ? dump_stack+0x3e/0x4e
[ 54.819555] [<c1043fc8>] ? warn_slowpath_common+0x88/0xc0
[ 54.819561] [<c112554d>] ? __mark_inode_dirty+0x14d/0x200
[ 54.819566] [<c112554d>] ? __mark_inode_dirty+0x14d/0x200
[ 54.819571] [<c1044033>] ? warn_slowpath_fmt+0x33/0x40
[ 54.819576] [<c112554d>] ? __mark_inode_dirty+0x14d/0x200
[ 54.819581] [<c1118dd9>] ? generic_update_time+0x59/0xa0
[ 54.819585] [<c1118d80>] ? inode_dio_wait+0xc0/0xc0
[ 54.819589] [<c111a308>] ? touch_atime+0x68/0x80
[ 54.819595] [<c1112b0c>] ? iterate_dir+0xec/0x120
[ 54.819601] [<c1112fed>] ? SyS_getdents64+0x6d/0xe0
[ 54.819605] [<c1112d40>] ? filldir+0x100/0x100
[ 54.819612] [<c150b44c>] ? sysenter_do_call+0x12/0x12
[ 54.819616] ---[ end trace d466387e1b37ac0d ]---
[ 60.523927] Buffer I/O error on dev sdc3, logical block 557056, lost sync
page write
[ 60.523935] JBD2: Error -5 detected when updating journal superblock for
sdc3-8.
[ 60.523938] Aborting journal on device sdc3-8.
[ 60.523942] Buffer I/O error on dev sdc3, logical block 557056, lost sync
page write
[ 60.523945] JBD2: Error -5 detected when updating journal superblock for
sdc3-8.
[ 64.858536] usb 2-2: USB disconnect, device number 11
[ 65.102421] usb 2-2: new SuperSpeed USB device number 12 using xhci_hcd
[ 65.121608] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 65.121793] scsi host18: usb-storage 2-2:1.0
[ 66.124296] scsi 18:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 66.124879] sd 18:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 66.125617] sd 18:0:0:0: [sdd] Write Protect is off
[ 66.125629] sd 18:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 66.126688] sd 18:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 66.130416] sdd: sdd1 sdd2 sdd3
[ 66.130649] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 66.132651] sd 18:0:0:0: [sdd] Attached SCSI removable disk
[ 73.387651] usb 2-2: USB disconnect, device number 12
[ 73.628167] usb 2-2: new SuperSpeed USB device number 13 using xhci_hcd
[ 73.646652] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 73.646839] scsi host19: usb-storage 2-2:1.0
[ 74.308633] usb 2-2: USB disconnect, device number 13
[ 74.535828] usb 2-2: new SuperSpeed USB device number 14 using xhci_hcd
[ 74.558303] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 74.558431] scsi host20: usb-storage 2-2:1.0
[ 75.560834] scsi 20:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 75.561494] sd 20:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 75.562198] sd 20:0:0:0: [sdd] Write Protect is off
[ 75.562209] sd 20:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 75.563250] sd 20:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 75.568920] sdd: sdd1 sdd2 sdd3
[ 75.569135] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 75.571360] sd 20:0:0:0: [sdd] Attached SCSI removable disk
[ 126.474122] usb 2-2: USB disconnect, device number 14
[ 126.721496] usb 2-2: new SuperSpeed USB device number 15 using xhci_hcd
[ 126.740392] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 126.740536] scsi host21: usb-storage 2-2:1.0
[ 127.785666] usb 2-2: USB disconnect, device number 15
[ 128.019531] usb 2-2: new SuperSpeed USB device number 16 using xhci_hcd
[ 128.038490] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 128.038647] scsi host22: usb-storage 2-2:1.0
[ 129.041357] scsi 22:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 129.041940] sd 22:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 129.042842] sd 22:0:0:0: [sdd] Write Protect is off
[ 129.042851] sd 22:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 129.043702] sd 22:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 129.049976] sdd: sdd1 sdd2 sdd3
[ 129.050478] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 129.052659] sd 22:0:0:0: [sdd] Attached SCSI removable disk
[ 135.340383] usb 2-2: USB disconnect, device number 16
[ 135.584261] usb 2-2: new SuperSpeed USB device number 17 using xhci_hcd
[ 135.602134] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 135.602320] scsi host23: usb-storage 2-2:1.0
[ 136.606529] scsi 23:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 136.607108] sd 23:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 136.607824] sd 23:0:0:0: [sdd] Write Protect is off
[ 136.607835] sd 23:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 136.608546] sd 23:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 136.614536] sdd: sdd1 sdd2 sdd3
[ 136.614964] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 136.617168] sd 23:0:0:0: [sdd] Attached SCSI removable disk
[ 137.475985] usb 2-2: USB disconnect, device number 17
[ 137.723220] usb 2-2: new SuperSpeed USB device number 18 using xhci_hcd
[ 137.742402] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 137.742545] scsi host24: usb-storage 2-2:1.0
[ 138.745155] scsi 24:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 138.745717] sd 24:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 138.746436] sd 24:0:0:0: [sdd] Write Protect is off
[ 138.746447] sd 24:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 138.747312] sd 24:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 138.752954] sdd: sdd1 sdd2 sdd3
[ 138.753386] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 138.755526] sd 24:0:0:0: [sdd] Attached SCSI removable disk
[ 140.452515] usb 2-2: USB disconnect, device number 18
[ 140.693050] usb 2-2: new SuperSpeed USB device number 19 using xhci_hcd
[ 140.711961] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 140.712119] scsi host25: usb-storage 2-2:1.0
[ 141.714655] scsi 25:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 141.715298] sd 25:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 141.716137] sd 25:0:0:0: [sdd] Write Protect is off
[ 141.716144] sd 25:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 141.716852] sd 25:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 141.722481] sdd: sdd1 sdd2 sdd3
[ 141.722861] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 141.724949] sd 25:0:0:0: [sdd] Attached SCSI removable disk
[ 150.920330] usb 2-2: USB disconnect, device number 19
[ 151.160849] usb 2-2: new SuperSpeed USB device number 20 using xhci_hcd
[ 151.179673] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 151.179834] scsi host26: usb-storage 2-2:1.0
[ 152.182792] scsi 26:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 152.183350] sd 26:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 152.184637] sd 26:0:0:0: [sdd] Write Protect is off
[ 152.184645] sd 26:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 152.185692] sd 26:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 152.191261] sdd: sdd1 sdd2 sdd3
[ 152.191688] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 152.193794] sd 26:0:0:0: [sdd] Attached SCSI removable disk
[ 203.846758] usb 2-2: USB disconnect, device number 20
[ 204.087327] usb 2-2: new SuperSpeed USB device number 21 using xhci_hcd
[ 204.106070] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 204.106232] scsi host27: usb-storage 2-2:1.0
[ 205.109182] scsi 27:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 205.109815] sd 27:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 205.110548] sd 27:0:0:0: [sdd] Write Protect is off
[ 205.110560] sd 27:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 205.111394] sd 27:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 205.116482] sdd: sdd1 sdd2 sdd3
[ 205.116913] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 205.118880] sd 27:0:0:0: [sdd] Attached SCSI removable disk
[ 227.272788] usb 2-2: USB disconnect, device number 21
[ 227.513285] usb 2-2: new SuperSpeed USB device number 22 using xhci_hcd
[ 227.531002] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 227.531137] scsi host28: usb-storage 2-2:1.0
[ 228.535037] scsi 28:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 228.535592] sd 28:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 228.536275] sd 28:0:0:0: [sdd] Write Protect is off
[ 228.536279] sd 28:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 228.536966] sd 28:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 228.541620] sdd: sdd1 sdd2 sdd3
[ 228.542040] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 228.547035] sd 28:0:0:0: [sdd] Attached SCSI removable disk
[ 235.354006] usb 2-2: USB disconnect, device number 22
[ 235.611245] usb 2-2: new SuperSpeed USB device number 23 using xhci_hcd
[ 235.630159] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 235.630365] scsi host29: usb-storage 2-2:1.0
[ 236.632657] scsi 29:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 236.633282] sd 29:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 236.634026] sd 29:0:0:0: [sdd] Write Protect is off
[ 236.634038] sd 29:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 236.634792] sd 29:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 236.640652] sdd: sdd1 sdd2 sdd3
[ 236.641072] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 236.643446] sd 29:0:0:0: [sdd] Attached SCSI removable disk
[ 261.418986] usb 2-2: USB disconnect, device number 23
[ 261.659393] usb 2-2: new SuperSpeed USB device number 24 using xhci_hcd
[ 261.678286] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 261.678459] scsi host30: usb-storage 2-2:1.0
[ 262.680408] scsi 30:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 262.680993] sd 30:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 262.681836] sd 30:0:0:0: [sdd] Write Protect is off
[ 262.681846] sd 30:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 262.682911] sd 30:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 262.688836] sdd: sdd1 sdd2 sdd3
[ 262.689253] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 262.691308] sd 30:0:0:0: [sdd] Attached SCSI removable disk
[ 291.762771] usb 2-2: USB disconnect, device number 24
[ 292.006540] usb 2-2: new SuperSpeed USB device number 25 using xhci_hcd
[ 292.025539] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 292.025710] scsi host31: usb-storage 2-2:1.0
[ 292.663315] usb 2-2: USB disconnect, device number 25
[ 292.890386] usb 2-2: new SuperSpeed USB device number 26 using xhci_hcd
[ 292.909785] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 292.910002] scsi host32: usb-storage 2-2:1.0
[ 293.915159] scsi 32:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 293.915834] sd 32:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 293.916542] sd 32:0:0:0: [sdd] Write Protect is off
[ 293.916553] sd 32:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 293.917478] sd 32:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 293.923048] sdd: sdd1 sdd2 sdd3
[ 293.923435] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 293.925614] sd 32:0:0:0: [sdd] Attached SCSI removable disk
[ 302.835736] usb 2-2: USB disconnect, device number 26
[ 303.076140] usb 2-2: new SuperSpeed USB device number 27 using xhci_hcd
[ 303.095332] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 303.095475] scsi host33: usb-storage 2-2:1.0
[ 304.097951] scsi 33:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 304.098538] sd 33:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 304.099270] sd 33:0:0:0: [sdd] Write Protect is off
[ 304.099279] sd 33:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 304.099993] sd 33:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 304.105853] sdd: sdd1 sdd2 sdd3
[ 304.106259] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 304.108309] sd 33:0:0:0: [sdd] Attached SCSI removable disk
[ 367.345661] usb 2-2: USB disconnect, device number 27
[ 367.589420] usb 2-2: new SuperSpeed USB device number 28 using xhci_hcd
[ 367.608733] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 367.608926] scsi host34: usb-storage 2-2:1.0
[ 368.614121] scsi 34:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 368.614745] sd 34:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 368.615470] sd 34:0:0:0: [sdd] Write Protect is off
[ 368.615483] sd 34:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 368.616312] sd 34:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 368.622246] sdd: sdd1 sdd2 sdd3
[ 368.622641] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 368.624697] sd 34:0:0:0: [sdd] Attached SCSI removable disk
[ 401.595039] usb 2-2: USB disconnect, device number 28
[ 401.838816] usb 2-2: new SuperSpeed USB device number 29 using xhci_hcd
[ 401.857897] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 401.858083] scsi host35: usb-storage 2-2:1.0
[ 402.860235] scsi 35:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 402.860916] sd 35:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 402.861624] sd 35:0:0:0: [sdd] Write Protect is off
[ 402.861631] sd 35:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 402.862471] sd 35:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 402.867449] sdd: sdd1 sdd2 sdd3
[ 402.867852] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 402.870116] sd 35:0:0:0: [sdd] Attached SCSI removable disk
[ 404.926955] usb 2-2: USB disconnect, device number 29
[ 405.167383] usb 2-2: new SuperSpeed USB device number 30 using xhci_hcd
[ 405.186657] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 405.186842] scsi host36: usb-storage 2-2:1.0
[ 406.192175] scsi 36:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 406.192750] sd 36:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 406.193481] sd 36:0:0:0: [sdd] Write Protect is off
[ 406.193493] sd 36:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 406.194342] sd 36:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 406.199699] sdd: sdd1 sdd2 sdd3
[ 406.199914] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 406.202052] sd 36:0:0:0: [sdd] Attached SCSI removable disk
[ 413.771985] usb 2-2: USB disconnect, device number 30
[ 414.012406] usb 2-2: new SuperSpeed USB device number 31 using xhci_hcd
[ 414.030959] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 414.031143] scsi host37: usb-storage 2-2:1.0
[ 415.033929] scsi 37:0:0:0: Direct-Access USB DISK 3.0 PMAP
PQ: 0 ANSI: 6
[ 415.034521] sd 37:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8
GB/14.7 GiB)
[ 415.035557] sd 37:0:0:0: [sdd] Write Protect is off
[ 415.035560] sd 37:0:0:0: [sdd] Mode Sense: 2b 00 00 08
[ 415.036240] sd 37:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 415.041656] sdd: sdd1 sdd2 sdd3
[ 415.042060] Elevator cfqd->cfq_slice_idle = 2, blk_queue_nonrot(q) 0
[ 415.044472] sd 37:0:0:0: [sdd] Attached SCSI removable disk
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
Subsystem: ASUSTeK Computer Inc. Device 8388
Flags: bus master, 66MHz, medium devsel, latency 0
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c
00:01.0 PCI bridge: ASUSTeK Computer Inc. AMD RS780/RS880 PCI to PCI bridge
(int gfx) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe9fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 8388
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI
bridge (PCIE port 0) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fea00000-feafffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 8388
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010
<?>
Capabilities: [110] Virtual Channel
Kernel driver in use: pcieport
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge
(PCIE port 2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 8388
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010
<?>
Capabilities: [110] Virtual Channel
Kernel driver in use: pcieport
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
I/O ports at c000 [size=8]
I/O ports at b000 [size=4]
I/O ports at a000 [size=8]
I/O ports at 9000 [size=4]
I/O ports at 8000 [size=16]
Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Capabilities: [70] SATA HBA v1.0
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1
Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1
Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe7fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
(rev 3c)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Flags: 66MHz, medium devsel
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: pata_atiixp
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia
(Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 840c
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fe7f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
LPC host controller
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI
Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe7fa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
Flags: fast devsel
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
RS780L [Radeon 3000] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8388
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at d000 [size=256]
Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: radeon
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev
04) (prog-if 30 [XHCI])
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at feafe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
Capabilities: [150] Latency Tolerance Reporting
Kernel driver in use: xhci_hcd
03:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0)
Subsystem: ASUSTeK Computer Inc. Device 83fe
Flags: bus master, fast devsel, latency 0, IRQ 31
Memory at febc0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at ec00 [size=128]
Capabilities: [40] Power Management version 3
Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [6c] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [180] Device Serial Number ff-42-ef-af-48-5b-39-ff
Kernel driver in use: atl1c
