In commit 734643dfbdde ("usb: dwc2: host: add flag to reflect bus
state") we changed dwc2_port_suspend() not to set the lx_state
anymore (instead it sets the new bus_suspended variable).  This
introduced a bug where we would fail to detect device insertions if:

1. Plug empty hub into dwc2
2. Plug USB flash drive into the empty hub.
3. Wait a few seconds
4. Unplug USB flash drive
5. Less than 2 seconds after step 4, plug the USB flash drive in again.

The dwc2_hcd_rem_wakeup() function should have been changed to look at
the new bus_suspended variable.

Let's fix it.  Since commit b46146d59fda ("usb: dwc2: host: resume root
hub on remote wakeup") talks about needing the root hub resumed if the
bus was suspended, we'll include it in our test.

It appears that the "port_l1_change" should only be set to 1 if we were
in DWC2_L1 (the driver currently never sets this), so we'll update the
former "else" case based on this test.

Fixes: 734643dfbdde ("usb: dwc2: host: add flag to reflect bus state")
Signed-off-by: Douglas Anderson <diand...@chromium.org>
---
 drivers/usb/dwc2/hcd.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index e79baf73c234..571c21727ff9 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -324,12 +324,13 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg)
  */
 static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg)
 {
-       if (hsotg->lx_state == DWC2_L2) {
+       if (hsotg->bus_suspended) {
                hsotg->flags.b.port_suspend_change = 1;
                usb_hcd_resume_root_hub(hsotg->priv);
-       } else {
-               hsotg->flags.b.port_l1_change = 1;
        }
+
+       if (hsotg->lx_state == DWC2_L1)
+               hsotg->flags.b.port_l1_change = 1;
 }
 
 /**
@@ -1428,8 +1429,8 @@ static void dwc2_wakeup_detected(unsigned long data)
        dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
                dwc2_readl(hsotg->regs + HPRT0));
 
-       hsotg->bus_suspended = 0;
        dwc2_hcd_rem_wakeup(hsotg);
+       hsotg->bus_suspended = 0;
 
        /* Change to L0 state */
        hsotg->lx_state = DWC2_L0;
-- 
2.6.0.rc2.230.g3dd15c0

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to