From: Li Jun <jun...@freescale.com>
Since the ci->role will be set after the host role start is complete, there
will be nobody cared irq during start host if usb irq enabled. This error
can be reproduced on i.mx6 sololite EVK board by:
1. disable otg id irq(IDIE) and disable all real otg properties of usbotg1
in dts.
2. boot up the board with ID cable and usb device connected.
3. echo gadget > /sys/kernel/debug/ci_hdrc.0/role
4. echo host > /sys/kernel/debug/ci_hdrc.0/role
5. irq 212: nobody cared.
Cc: <sta...@vger.kernel.org> # v3.10+
Signed-off-by: Li Jun <jun...@freescale.com>
Signed-off-by: Peter Chen <peter.c...@freescale.com>
---
drivers/usb/chipidea/debug.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index 080b7be..58c8485 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -322,8 +322,10 @@ static ssize_t ci_role_write(struct file *file, const char
__user *ubuf,
return -EINVAL;
pm_runtime_get_sync(ci->dev);
+ disable_irq(ci->irq);
ci_role_stop(ci);
ret = ci_role_start(ci, role);
+ enable_irq(ci->irq);
pm_runtime_put_sync(ci->dev);
return ret ? ret : count;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
