John,
On Wed, Dec 2, 2015 at 11:14 AM, John Youn <[email protected]> wrote:
> The reset is required to get reset values of the hardware parameters but
> the force mode is not. Move the base reset into dwc2_get_hwparams() and
> do the reset and force mode afterwards.
>
> Signed-off-by: John Youn <[email protected]>
> ---
> drivers/usb/dwc2/core.c | 5 +++++
> drivers/usb/dwc2/platform.c | 8 ++------
> 2 files changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
> index 382f563..7090050 100644
> --- a/drivers/usb/dwc2/core.c
> +++ b/drivers/usb/dwc2/core.c
> @@ -3116,6 +3116,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
> u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
> u32 hptxfsiz, grxfsiz, gnptxfsiz;
> u32 gusbcfg = 0;
> + int retval;
>
> /*
> * Attempt to ensure this device is really a DWC_otg Controller.
nit: technically the comment from commit aa63719d0b31 ("usb: dwc2:
Improve handling of host and device hwparams") adding that this
function now does a reset should have been added in this patch.
> @@ -3135,6 +3136,10 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
> hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
> hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
>
> + retval = dwc2_core_reset(hsotg);
> + if (retval)
> + return retval;
> +
> hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
> hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
> hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index f18d50f..12826a1 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -510,12 +510,6 @@ static int dwc2_driver_probe(struct platform_device *dev)
> if (retval)
> return retval;
>
> - /*
> - * Reset before dwc2_get_hwparams() then it could get power-on real
> - * reset value form registers.
> - */
> - dwc2_core_reset_and_force_mode(hsotg);
> -
> /* Detect config values from hardware */
> retval = dwc2_get_hwparams(hsotg);
> if (retval)
> @@ -524,6 +518,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
> /* Validate parameter values */
> dwc2_set_parameters(hsotg, params);
>
> + dwc2_core_reset_and_force_mode(hsotg);
> +
Isn't this introducing a 2nd reset that's not necessary? You already
know that dwc2_get_hwparams() did a reset and now you're doing a 2nd
reset. Maybe I'm misunderstanding...
-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
