On 12/08/2015 03:31 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 12/08/2015 01:31 AM, Hauke Mehrtens wrote:
>
>> From: Rafał Miłecki <[email protected]>
>>
>> This fixes problem with controller seeing devices only in some small
>> percentage of cold boots.
>> This quirk is also added to the platform data so we can activate it
>> when we register our platform driver.
>>
>> Signed-off-by: Rafał Miłecki <[email protected]>
>> Signed-off-by: Hauke Mehrtens <[email protected]>
>
> [...]
>> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
>> index 643d312..d49be9b 100644
>> --- a/drivers/usb/host/xhci.c
>> +++ b/drivers/usb/host/xhci.c
>> @@ -122,6 +122,39 @@ int xhci_halt(struct xhci_hcd *xhci)
>> return ret;
>> }
>>
>> +static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
>> +{
>> + u32 temp;
>> +
>> + /* alloc a virt device for slot */
>> + if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
>> + xhci_warn(xhci, "Could not allocate xHCI USB device data
>> structures\n");
>> + return -ENOMEM;
>> + }
>> +
>> + /* ring fake doorbell for slot_id ep 0 */
>> + xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
>> + usleep_range(1000, 1500);
>> +
>> + /* read the status register to check if HSE is set or not? */
>> + temp = readl(&xhci->op_regs->status);
>> +
>> + /* clear HSE if set */
>> + if (temp & STS_FATAL) {
>> + xhci_dbg(xhci, "HSE problem detected, status: 0x%x\n", temp);
>> + temp &= ~(0x1fff);
>
> Parens around the literal not needed at all...
I will remove them
>
> [...]
>> @@ -568,10 +601,25 @@ int xhci_init(struct usb_hcd *hcd)
>>
>> static int xhci_run_finished(struct xhci_hcd *xhci)
>> {
>> - if (xhci_start(xhci)) {
>> - xhci_halt(xhci);
>> - return -ENODEV;
>> + int err;
>> +
>> + err = xhci_start(xhci);
>> + if (err) {
>> + err = -ENODEV;
>> + goto out_err;
>> + }
>> + if (xhci->quirks & XHCI_FAKE_DOORBELL) {
>> + err = xhci_fake_doorbell(xhci, 1);
>> + if (err)
>> + goto out_err;
>> +
>> + err = xhci_start(xhci);
>> + if (err) {
>> + err = -ENODEV;
>> + goto out_err;
>> + }
>
> Is it really necessary to call xhci_start() twice?
at least in my test it was necessary. I will look into this again.
Hauke
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
