Hi, "Felipe F. Tonello" <[email protected]> writes: > [ text/plain ] > This gadget uses a bmAttributes and MaxPower that requires the USB bus to be > powered from the host, which is not correct because this configuration is > device > specific, not a USB-MIDI requirement. > > This patch adds two modules parameters, bmAttributes and MaxPower, that allows > the user to set those flags. The default values are what the gadget used to > use > for backward compatibility. > > Signed-off-by: Felipe F. Tonello <[email protected]> > --- > drivers/usb/gadget/legacy/gmidi.c | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/gadget/legacy/gmidi.c > b/drivers/usb/gadget/legacy/gmidi.c > index fc2ac150f5ff..0553435cc360 100644 > --- a/drivers/usb/gadget/legacy/gmidi.c > +++ b/drivers/usb/gadget/legacy/gmidi.c > @@ -63,6 +63,14 @@ static unsigned int out_ports = 1; > module_param(out_ports, uint, S_IRUGO); > MODULE_PARM_DESC(out_ports, "Number of MIDI output ports"); > > +static unsigned int bmAttributes = USB_CONFIG_ATT_ONE; > +module_param(bmAttributes, uint, S_IRUGO); > +MODULE_PARM_DESC(bmAttributes, "Configuration Descriptor's bmAttributes > parameter"); > + > +static unsigned int MaxPower = CONFIG_USB_GADGET_VBUS_DRAW; > +module_param(MaxPower, uint, S_IRUGO); > +MODULE_PARM_DESC(MaxPower, "Used to calculate Configuration Descriptor's > bMaxPower parameter");
you didn't run checkpatch, did you ? Also, are you sure you will need to
change this by simply reloading the module ? I'm not convinced.
> @@ -119,8 +127,8 @@ static struct usb_configuration midi_config = {
> .label = "MIDI Gadget",
> .bConfigurationValue = 1,
> /* .iConfiguration = DYNAMIC */
> - .bmAttributes = USB_CONFIG_ATT_ONE,
nack, nackety nack nack nack :-)
USB_CONFIG_ATT_ONE *must* always be set. With your module parameter you
give users the oportunity to violate USB spec.
--
balbi
signature.asc
Description: PGP signature
