Hi, Sergei,
You are correct. I had only thought to submit the least number of changes to
eliminate the problem.
A better fix is to make the leading part of the names EP_MODE_AUTOREQ
consistent for the [mode] parameter to cppi41_set_autoreq_mode( struct
cppi41_dma_channel *cppi41_channel, unsigned mode ), as follows:
---
--- linux-3.18.29/drivers/usb/musb/musb_cppi41.c 2016-03-18
02:09:52.000000000 +0800
+++ linux-3.18.1/drivers/usb/musb/musb_cppi41.c 2016-03-30 19:58:31.486965871
+0800
@@ -9,9 +9,9 @@
#define RNDIS_REG(x) (0x80 + ((x - 1) * 4))
-#define EP_MODE_AUTOREG_NONE 0
-#define EP_MODE_AUTOREG_ALL_NEOP 1
-#define EP_MODE_AUTOREG_ALWAYS 3
+#define EP_MODE_AUTOREQ_NONE 0
+#define EP_MODE_AUTOREQ_ALL_NEOP 1
+#define EP_MODE_AUTOREQ_ALWAYS 3
#define EP_MODE_DMA_TRANSPARENT 0
#define EP_MODE_DMA_RNDIS 1
@@ -396,19 +396,19 @@ static bool cppi41_configure_channel(str
/* auto req */
cppi41_set_autoreq_mode(cppi41_channel,
- EP_MODE_AUTOREG_ALL_NEOP);
+ EP_MODE_AUTOREQ_ALL_NEOP);
} else {
musb_writel(musb->ctrl_base,
RNDIS_REG(cppi41_channel->port_num), 0);
cppi41_set_dma_mode(cppi41_channel,
EP_MODE_DMA_TRANSPARENT);
cppi41_set_autoreq_mode(cppi41_channel,
- EP_MODE_AUTOREG_NONE);
+ EP_MODE_AUTOREQ_NONE);
}
} else {
/* fallback mode */
cppi41_set_dma_mode(cppi41_channel, EP_MODE_DMA_TRANSPARENT);
- cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREG_NONE);
+ cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE);
len = min_t(u32, packet_sz, len);
}
cppi41_channel->prog_len = len;
---
> On 30 Mar 2016, at 19:29, Sergei Shtylyov
> <[email protected]> wrote:
>
> Hello.
>
> On 3/30/2016 1:56 AM, Antonio Victor Hilario wrote:
>
>> I'd been using kernel 3.18.10-29 on a set of Beaglebone Black boards, and
>> had found and corrected this on my local build tree.
>>
>> Kernel build fails when the source file drivers/usb/musb/musb_cppi41.c is
>> built, with these kernel options enabled:
>>
>> CONFIG_USB_MUSB_HDRC=y
>> CONFIG_USB_TI_CPPI41_DMA=y
>>
>> The build fails with these errors, due to a misspelled constant name
>> EP_MODE_AUTOREQ_NONE:
>>
>> drivers/usb/musb/musb_cppi41.c: In function 'cppi41_dma_channel_abort':
>> drivers/usb/musb/musb_cppi41.c:544:43: error: 'EP_MODE_AUTOREQ_NONE'
>> undeclared (first use in this function)
>> cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE);
>> ^
>> drivers/usb/musb/musb_cppi41.c:544:43: note: each undeclared identifier is
>> reported only once for each function it appears in
>> scripts/Makefile.build:257: recipe for target
>> 'drivers/usb/musb/musb_cppi41.o' failed
>> make[3]: *** [drivers/usb/musb/musb_cppi41.o] Error 1
>> scripts/Makefile.build:402: recipe for target 'drivers/usb/musb' failed
>> make[2]: *** [drivers/usb/musb] Error 2
>> scripts/Makefile.build:402: recipe for target 'drivers/usb' failed
>> make[1]: *** [drivers/usb] Error 2
>> Makefile:937: recipe for target 'drivers' failed
>>
>> Signed-off-by: Antonio VA Hilario <[email protected]>
>> ---
>>
>> --- drivers/usb/musb/musb_cppi41.c 2016-03-18 02:09:52.000000000 +0800
>> +++ ../../linux-3.18.29/drivers/usb/musb/musb_cppi41.c 2016-02-08
>> 13:30:43.334822382 +0800
>> @@ -541,7 +541,7 @@ static int cppi41_dma_channel_abort(stru
>> csr &= ~MUSB_TXCSR_DMAENAB;
>> musb_writew(epio, MUSB_TXCSR, csr);
>> } else {
>> - cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE);
>> + cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREG_NONE);
>
> That simply doesn't make sense. Need to rename the #define, the typo is
> there.
>
> MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
