Since we have added otg version and HNP polling support, update related documentation.
Signed-off-by: Peter Chen <[email protected]> --- Documentation/usb/chipidea.txt | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 678741b..edf7cdf 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -3,14 +3,17 @@ To show how to demo OTG HNP and SRP functions via sys input files with 2 Freescale i.MX6Q sabre SD boards. -1.1 How to enable OTG FSM in menuconfig +1.1 How to enable OTG FSM --------------------------------------- -Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules. -If you want to check some internal variables for otg fsm, -mount debugfs, there are 2 files which can show otg fsm -variables and some controller registers value: +1.1.1 Select CONFIG_USB_OTG_FSM in menuconfig, rebuild kernel +Image and modules. If you want to check some internal +variables for otg fsm, mount debugfs, there are 2 files +which can show otg fsm variables and some controller registers value: cat /sys/kernel/debug/ci_hdrc.0/otg cat /sys/kernel/debug/ci_hdrc.0/registers +1.1.2 Add below entries in your dts file for your controller node + otg-rev = <0x0200>; + adp-disable; 1.2 Test operations ------------------- -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
