From: Dinh Nguyen <dingu...@opensource.altera.com>
Allow for platforms that have a reset controller driver in place to bring
the USB IP out of reset.
Signed-off-by: Dinh Nguyen <dingu...@opensource.altera.com>
---
v4: use dev_dbg() if not a -EPROBE_DEFER
v3: fix compile error
v2: move to lowlevel_hw_init()
---
drivers/usb/dwc2/core.h | 1 +
drivers/usb/dwc2/platform.c | 15 +++++++++++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 3c58d63..f748132 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -837,6 +837,7 @@ struct dwc2_hsotg {
void *priv;
int irq;
struct clk *clk;
+ struct reset_control *reset;
unsigned int queuing_high_bandwidth:1;
unsigned int srp_success:1;
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 88629be..5e89af1 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -45,6 +45,7 @@
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/reset.h>
#include <linux/usb/of.h>
@@ -337,6 +338,17 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
{
int i, ret;
+ hsotg->reset = devm_reset_control_get(hsotg->dev, "dwc2");
+ if (IS_ERR(hsotg->reset)) {
+ if (PTR_ERR(hsotg->reset) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_dbg(hsotg->dev, "Could not get reset control.\n");
+ hsotg->reset = NULL;
+ }
+
+ if(hsotg->reset)
+ reset_control_deassert(hsotg->reset);
+
/* Set default UTMI width */
hsotg->phyif = GUSBCFG_PHYIF16;
@@ -434,6 +446,9 @@ static int dwc2_driver_remove(struct platform_device *dev)
if (hsotg->ll_hw_enabled)
dwc2_lowlevel_hw_disable(hsotg);
+ if (hsotg->reset)
+ reset_control_assert(hsotg->reset);
+
return 0;
}
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
