Hi all, Here's a series of fixes to get MUSB PM runtime working again.
I can now test PM runtime with the 2430 glue layer with this set, so adding PM runtime support for other glue layers should be possible. Regards, Tony Tony Lindgren (10): usb: phy: Fix initial state for twl6030 usb: musb: Fix idling after host mode by increasing autosuspend delay usb: musb: Fix PM runtime handling for connected cable usb: musb: Remove unnecessary shutdown function usb: musb: Fix PM runtime autosuspend usb: musb: Split PM runtime between wrapper IP and musb core usb: musb: Manage USB phy from PM runtime calls usb: musb: Remove try_idle for 2430 glue layer usb: musb: Fix PM runtime with delayed work usb: musb: Remove pm_runtime_set_irq_safe drivers/usb/musb/musb_core.c | 67 ++++++---------- drivers/usb/musb/musb_core.h | 1 + drivers/usb/musb/musb_gadget.c | 26 +++++-- drivers/usb/musb/omap2430.c | 155 +++++++++----------------------------- drivers/usb/phy/phy-twl6030-usb.c | 17 ++++- 5 files changed, 93 insertions(+), 173 deletions(-) -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
