As a micro-power optimization, let's only resume the
USB2 PHY if we're working on <=HIGHSPEED. If we're
gonna work on SUPERSPEED or SUPERSPEED+, there's no
point in resuming the USB2 PHY.
Fixes: 2b0f11df84bb ("usb: dwc3: gadget: clear SUSPHY bit before ep cmds")
Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com>
---
drivers/usb/dwc3/gadget.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2a53d318f581..68d13f107b2f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -258,11 +258,13 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned
cmd,
* We will also set SUSPHY bit to what it was before returning as stated
* by the same section on Synopsys databook.
*/
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
- susphy = true;
- reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ if (dwc->gadget.speed <= USB_SPEED_HIGH) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
+ susphy = true;
+ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ }
}
if (cmd == DWC3_DEPCMD_STARTTRANSFER) {
--
2.8.2
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki
Business Identity Code: 0357606 - 4
Domiciled in Helsinki
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
