Hi,
William Wu <william...@rock-chips.com> writes:
> This patch documents the device tree documentation required for
> Rockchip USB3.0 core wrapper consist of USB3.0 IP from Synopsys.
>
> It could operate in device mode (SS, HS, FS) and host
> mode (SS, HS, FS, LS).
>
> Signed-off-by: William Wu <william...@rock-chips.com>
> ---
> Changes in v2:
> - add rockchip,dwc3.txt to Documentation/devicetree/bindings/ (Felipe, Brian)
>
> .../devicetree/bindings/usb/rockchip,dwc3.txt | 45
> ++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> new file mode 100644
> index 0000000..10303d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> @@ -0,0 +1,45 @@
> +Rockchip SuperSpeed DWC3 USB SoC controller
> +
> +Required properties:
> +- compatible: should contain "rockchip,dwc3"
> +- clocks: A list of phandle + clock-specifier pairs for the
> + clocks listed in clock-names
> +- clock-names: Should contain the following:
> + "clk_usb3otg0_ref" Controller reference clk
> + "clk_usb3otg0_suspend"Controller suspend clk, can use 24 MHz or 32 KHz
> + "aclk_usb3" Master/Core clock, have to be >= 62.5 MHz for
> SS operation
> +
> +
> +Optional clocks:
> + "aclk_usb3otg0" Aclk for specific usb controller clock.
> + "aclk_usb3_rksoc_axi_perf" USB AXI perf clock. Not present on all
> platforms.
> + "aclk_usb3_grf" USB grf clock. Not present on all platforms.
> +
> +Required child node:
> +A child node must exist to represent the core DWC3 IP block. The name of
> +the node is not important. The content of the node is defined in dwc3.txt.
> +
> +Phy documentation is provided in the following places:
> +
> +Example device nodes:
> +
> + usbdrd3_0: usb@fe800000 {
> +
no reg property?
compatible = "rockchip,dwc3";
> + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
> + <&cru ACLK_USB3>, <&cru ACLK_USB3OTG0>,
> + <&cru ACLK_USB3_RKSOC_AXI_PERF>, <&cru ACLK_USB3_GRF>;
> + clock-names = "clk_usb3otg0_ref", "clk_usb3otg0_suspend",
> + "aclk_usb3", "aclk_usb3otg0",
> + "aclk_usb3_rksoc_axi_perf", "aclk_usb3_grf";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";
> + usbdrd_dwc3_0: dwc3 {
no address here?
> + compatible = "snps,dwc3";
> + reg = <0x0 0xfe800000 0x0 0x100000>;
> + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "otg";
> + status = "disabled";
> + };
> + };
> --
> 1.9.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
balbi
signature.asc
Description: PGP signature
